• 한국정보전자통신기술학회논문지
• /
• 제12권3호
• /
• pp.306-311
• /
• 2019

본 논문에서는 사전 연구로 제작된 손목시계형태의 반사형과 투과형 PPG 측정 장치의 온도 변화에 대한 특성을 고찰하였다. PPG는 신체의 온도 변화에 따라 그래프의 모양이 영향을 받게 되는데 본 논문에서는 신체의 온도 변화가 아닌 측정 장비의 온도 변화에 따른 영향을 고찰하였다. 실험은 기존에 제작된 장치의 마이크로 컨트롤러의 내부 온도를 측정하면서 내부 온도 변화에 따른 PPG의 변화를 관찰하였다. 실험 결과, 사용된 마이크로 컨트롤러의 동작 시간에 따라 온도는 무리함수의 그래프 형태로 변화하였으며 온도 상승에 따라 투과형 측정 장치는 온도에 영향을 받지 않았으나 반사형 측정 장치는 PPG 측정 결과에 변화가 발생함을 확인하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.311-312
• /
• 2002

Friction losses in complex tribo-technical system are revealed primarily through their effect on the operating temperature level. In order to assess the influence of the oil formulation on the temperature level comprehensive tests were run in a model test apparatus consisting of a special adapter for the 4-ball test rig. More than ten with different formulations (different base oils, additive packages and viscosity modifiers) were tested, The resulting temperature levels varied by nearly 25 %. The objective of this model testing is to assess the influence of the oil formulation on the operating temperature of vehicle manual transmission. The correlation to the real tribotechnical system was confirmed by a VW Polo transmission test.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.29-32
• /
• 2000

Superconducting transmission cable is one of interesting part in power application using high temperature super-conducting wire as transformance. One important parameter in HTS cable design is transport current distribution because it is related with current transmission capacity and loss. In this paper, we present the calculation theory of current distribution for multi-layer cable using the electric circuit model and in example, calculation results of current distribution and AC loss in each layer of 4-layer HTS transmission cable.

• 한국산업보건학회지
• /
• 제23권4호
• /
• pp.333-340
• /
• 2013

Objectives: This study was designed to establish an accurate analytical method for asbestos in a biological sample for determining occupational asbestos-related diseases and relief of the health effects of environmental asbestos. Methods: Biological samples were obtained from lungs of rats following intratracheal instillation of asbestos(Chrysotile, anthophyllite) and were prepared according to digestion method(Wet digestion, high temperature ashing, low temperature ashing). The samples were then analyzed for asbestos fibers using a transmission electron microscope equipped with an energy dispersive X-ray spectrometer. Results: Low temperature plasma ashing removed more of the organic components and reduced fiber loss compared to the wet digestion method, making specimens so prepared more suitable for transmission electron microsocpy. Conclusions: The low temperature ashing technique is the most accurate method for analyzing asbestos in biological samples.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.95-100
• /
• 2015

The in-situ heating transmission electron microscopy experiment allows us to observe the time- and temperature-dependent dynamic processes in nanoscale materials by examining the same specimen. The temperature, which is a major experimental parameter, must be measured accurately during in-situ heating experiments. Therefore, calibrating the thermocouple readout of the heating holder prior to the experiment is essential. The calibration can be performed using reference materials whose phase-transformation (melting, oxidation, reduction, etc.) temperatures are well-established. In this study, the calibration experiment was performed with four reference materials, i.e., pure Sn, Al-95 wt%Zn eutectic alloy, NiO/carbon nanotube composite, and pure Al, and the calibration curve and formula were obtained. The thermocouple readout of the holder used in this study provided a reliable temperature value with a relative error of <4%.

• Tribology and Lubricants
• /
• 제30권5호
• /
• pp.265-270
• /
• 2014

Frictional heat greatly influences the friction behaviors during clutch engagement. Therefore, the engagement of a wet or dry clutch is frequently not under control by the frictional heat. In a wet clutch, the frictional temperature also specially needs to be controlled, and in many cases, the clutch material is selected to prevent a temperature rise from the friction between friction pad and separator. However, only the selection of the clutch material cannot ensure sufficient control of the temperature rise by the friction. The groove pattern on a friction pad is designed for more flow rates of transmission fluid between the contact gap of clutch pad and separator for the cooling effect. In this work, grove patterns are designed for more flow rates out of the contact gap between friction pad and separator plate. Selected groove design shows the improvement flow rates of transmission fluid through both inner and outer radius, where most of the transmission fluid flows through the outer radius when the clutch is engaged due to the centrifugal force in conventional wet clutch groove. Several comparisons of the amounts of frictional heat generated on clutch pads are made in order to verify the decrease of the temperature rise according to the flow rates along the groove patterns.

• The Plant Pathology Journal
• /
• 제24권1호
• /
• pp.31-35
• /
• 2008

The presence of Chrysanthemum stunt viroid (CSVd) in seed and pollen of diseased chrysanthemum was demonstrated. In seeds infected male parent from crosses in May, CSVd was transmitted to 6.7% of the progeny seedlings, whereas if the female parent was infected, CSVd transmission rate was between 46.9 and 75.7%. A relatively high incidence of 94.4 to 96.0% seed transmission occurred when both parents were infected. In seeds infected male parent from crosses in December, no progeny seedlings were infected with CSVd, whereas if the female parent did, CSVd transmission rate was 1.5%. When both parents were infected, 6.9% seed transmission was occurred. The seed transmission rate depended on the temperature when the crosses were made. CSVd was not detected in the non-infected female parent pollinated with infected pollen but was transmitted to the progenies. This is the first report of seed-borne transmission of CSVd in chrysanthemum.

• 한국광학회지
• /
• 제9권2호
• /
• pp.100-103
• /
• 1998

광섬유 격자의 투과 및 반사 특성을 이용하여 WDM 광원의 파장을 간단하면서도 효과적으로 안정화시키는 방법을 제시하였다. 우선 본 방법을 DFB-LD에 적용하여 바이어스 전류에 따른 파장 변화를 살펴보았을 때, 일정한 온도에서 나타나는 +0.011 nm/mA 파장 변화가 관측되지 않았다. 또한 EMLD에 적용하였을 때, 일정한 온도에서 RF변조시에 보인 약 0.08 nm파장 변화를 거의 찾아볼 수 없었다.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.685-687
• /
• 2024

Fiber optic cables are used extensively for remote monitoring in applications under extreme conditions, such as at high temperatures or in ionizing radiation fields. When high temperature fiber optic cables were subjected to gamma irradiations, there was a significant loss in transmission at wavelengths < 350 nm after only 1 minute of irradiation. Negligible recovery of the fiber optic transmission with time was observed over 2 years, but the irradiation damage was almost completely reversed by high temperature annealing at 400 ℃.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.248-248
• /
• 2007

Demands for electricity are growing, whereas the rate of electricity infrastructure's construction declines gradually. To keep the balance of the demand and supply, the share of underground transmission line will be increased from 8.3% to 10.5% in 2020 but it will be accompanied with enormous public expenses. A great concern in high capacity transmission is on the increase so as to maximize the spacial efficiency. High Temperature Superconducting (HTS) cable is in the lime light which has the merits of environment-friendly, low transmission loss and high transmission with low voltage, but the reliability verification as a power system is yet to be solved. KEPCO completed the installation and acceptance of $3{\phi}$, 22.9kV, 1250A class HTS cable system in 2006 and the long term test is in progress. The test results focusing on long term reliability are presented in this paper.