• Ocean and Polar Research
• /
• 제41권3호
• /
• pp.135-145
• /
• 2019

We investigated the mass occurrence of the salp Salpa fusiformis during spring in the southern waters of Korea and the northern East China Sea. Abundance of S. fusiformis and dominant taxonomic groups including copepods, ostracods, euphausiids, and appendicularian was examined along with environmental factors (e.g., temperature, salinity, and chlorophyll-a concentration). The abundance of S. fusiformis at 27 stations ranged from 0 to $183\;inds\;m^{-3}$. Both aggregate and solitary forms of S. fusiformis occurred with a mean abundance of $62\;inds\;m^{-3}$ and $4\;inds\;m^{-3}$, and mean body length of 6.5 mm and 15.4 mm, respectively. Redundancy analysis showed that the abundance of S. fusiformis was negatively correlated with chlorophyll-a concentration, indicating the intensive grazing impact of S. fusiformis on phytoplankton. While the abundance of S. fusiformis increased, the species diversity of zooplankton community decreased. The abundances of total copepods and the dominant copepod species (e.g., adults and/or copepodites of Paracalansus parvus s.l., Calanus sinicus, Oithona similis, and Corycaeus affinis) also decreased with the increase of S. fusiformis abundance. However, the abundance of ostracods, euphausiids, and appendicularians was not affected by the mass occurrence of the salps. These results suggest that the mass occurrence of S. fusiformis in spring could negatively affect ecosystem conditions by changing trophodynamics in the zooplankton community.

• 한국농공학회논문집
• /
• 제61권3호
• /
• pp.31-41
• /
• 2019

More than 90% of roadway in the world are paved as asphalt concrete pavement due to its excellent properties compared with other paving materials; excellent riding quality, flexibility, anti-icing property and easy maintenance-ability. In this study, to make best use of the softer property of the asphalt mixture, the flexible sand asphalt mixture (FSAM) was developed for pedestrian ways. The mix design was conducted to prepare FSAM using PG64-22 asphalt, screenings (sand) less than 5mm, crumb rubber, hydrated lime and limestone powder without coarse aggregate. The deformation strength ($S_D$), indirect tensile strength (ITS) and tensile strength ratio (TSR) tests were conducted to make sure durability of FSAM performance. The impact energy absorption and flexibility were measured by drop-boll test and the resilient modulus ($M_R$) test. The impact energy absorption of FSAM was compared with normal asphalt pavement, concrete pavement, stone and concrete block for pedestrian way. As a result of drop-boll test, FSAM showed higher impact energy absorption compared with other paving materials with the range of 18% to 43%. Impact energy absorption of FSAM increased with increasing test temperature from 5 to $40^{\circ}C$. The results of $M_R$ test at $5^{\circ}C$ showed that the flexibility of FSPA was increased further, because the $M_R$ value of the sand asphalt was measured to be 38% lower than normal dense-graded asphalt mixture (WC-1). Therefore, it was concluded that the FSAM could provide a high impact absorbing characteristics, which would improve walking quality of the pedestrian ways.

• 대한기계학회논문집B
• /
• 제23권11호
• /
• pp.1379-1389
• /
• 1999

A new technique for control of size and shape of flame-made particles is Introduced. The characteristic sintering time can be controlled Independently of collision time by heating the particles with irradiation of laser because the sintering time strongly depends on temperature. A coflow oxy-hydrogen diffusion flame burner was used for $SiCl_4$ conversion to silica particle. Nanometer sized aggregates irradiated by a high power CW $CO_2$ laser beam were rapidly heated up to high temperatures and then were sintered to approach volume-equivalent spheres. The sphere collides much slower than the aggregate, which results in reduction of sizes of particles maintaining spherical shape. Light scattering of Ar ion laser and TEM observation using a local sampling device were used to confirm the above effects. When the $CO_2$ laser was irradiated at low position from the burner surface, particle generation due to gas absorption of laser beam occurred and thus scattering intensity increased with $CO_2$ laser power. At high irradiation position, scattering intensity decreased with $CO_2$ laser power and TEM image showed a clear mark of evaporation and recondensation of particles for high $CO_2$ laser power. When the laser was irradiated between the above two positions where small aggregates exist, average size of spherical particles obviously decreased to 58% of those without $CO_2$ laser irradiation with the spherical shape. Even for increased carrier gas flow rate by a factor of three, TEM photograph also revealed considerable reduction of particle size.

• 자원리싸이클링
• /
• 제19권2호
• /
• pp.54-62
• /
• 2010

본 연구는 석탄폐석을 폐갱도 충전용 골재로 사용 할 때 나타날 수 있는 문제점을 파악하고 그 해결 방안을 제시하기 위하여 수행되었으며, 석탄폐석이 가장 많이 적치되어 있는 태백지역의 함태 탄광 석탄폐석을 대상으로 석탄폐석의 물성, 석탄폐석으로부터 산성광산배수(AMD)의 발생 특성, 석탄폐석으로부터 중금속의 용출 특성 등을 조사하였다. 석탄폐석의 물성 연구에서는 석탄폐석의 입도분포, 입단별 화학조성 및 중금속 분포, 광물조성 등이 조사되었으며, 석탄폐석으로부터 AMD 발생 특성 연구에서는 시간, 온도, 황철석의 함량, 황화물의 종류, 폐석의 입도, 공존암의 종류 등이 AMD 발생에 미치는 영향을 조사하였고, 중금속 용출 특성 연구에서는 석탄폐석 만을 사용한 경우와 석회석과 석탄폐석을 혼합하여 안정화 시킨 시료를 대상으로 폐기물공정시험법, TCLP법, 장기연속추출법(컬럼시험)에 의한 중금속 용출 특성을 조사하였다. 연구 결과로부터 석탄폐석은 폐갱도 충전용 등의 골재로 재활용이 가능하나 지하수에 침수상태에 있는 폐갱 속에 석탄폐석 만을 투입하여 충전하면 충전 후 12일 경부터 AMD가 발생할 것으로 예측된다. AMD가 발생하면 높은 수소이온농도 때문에 폐갱 내 잔류하는 철재류 등으로부터 중금속의 용출을 가속화 하는 등 환경 요염의 염려가 있고, AMD의 발생을 막기 위해서는 석회석을 4%이상 혼합하여야 함을 알았다.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.93-99
• /
• 2012

PURPOSES: The purpose of this study is to compare the alkali-silica reactivity for mortar bar and concrete prism specimens using crushed aggregates of 5 types in Korea. And the alkali-silica reactivity for those aggregates are measured by chemical test method. METHODS: The alkali-silica reactivity for those aggregates was measured by chemical test method of KS F 2545, mortar-bar test of KS F 2546, accelerated mortar-bar test method of ASTM C 1260 and concrete prism test method of ASTM C 1293, relatively. RESULTS: The alkali-silica reactivity for those aggregates was verified by chemical test of KS F 2546 and accelerated mortar-bar test of ASTM C 1260. However, it was not by mortar-bar test of KS F 2546 and concrete prism test of ASTM C 1293. CONCLUSIONS: The above results showed that relationship among the four test methods were very low. The results from 3 types of test methods using cement-aggregate combinations appeared to be different. Because the environmental conditions of test methods for measuring the alkali-silica reactivity such as equivalent alkali content(external source), humidity, temperature, and times were different though the aggregates were same. Moreover, alkali-silica reactivity showed the biggest impact when alkalis were supplied form outside and exposed to environmental conditions. The accelerated mortar-bar test method seems to be most appropriate test method for concrete structures exposed to alkali environment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.529-532
• /
• 2008

우리나라에 제설제 피해가 발생하는 곳은 일평균기온이 0$^{\circ}C$이하로 되는 경우이므로 국내에서는 거의 모든 지역이 해당될 수 있다. 따라서, 다소 정도의 차이는 있으나 전국적으로 대부분의 강재 및 콘크리트 구조물이 동결융해 및 염해의 피해를 받고 있다고 볼 수 있다. 현재 주로 사용되고 있는 제설제는 염화물계인 염화칼슘과 소금이나, 이러한 염화물계 제설제를 많이 사용하게 됨에 따라 콘크리트 구조물의 조기 손상 및 환경피해로 인한 유지관리 비용이 크게 증가하고 있다. 따라서, 염화물계 제설제가 대량 살포되고 동결융해에 의한 동해를 받는 적설한랭지에서의 콘크리트 구조물 및 환경에 미치는 심각한 악영향에 대한 대책 방안을 강구하여야 하는 실정이다. 위와같은 취지로서 본 연구에서는 염화물계 제설제의 대체제로 친환경적인 비염화물계 제설제의 적용방안을 검토하기 위하여 강재의 부식 및 콘크리트의 동결융해에 미치는 영향을 평가하고자 비염화물계 제설제와 일반 제설제와의 pH 및 유해물질 함유량을 비교하였고 강재부식성 시험 및 동결융해 저항성 시험을 실시하여 그 성능을 평가하였다.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.362-367
• /
• 2012

Magnetite nanoparticles(NPs) have been the subject of much interest by researchers owing to their potential use as magnetic carriers in drug targeting and as a tumor treatment in cases of hyperthermia. However, magnetite nanoparticles with 10 nm in diameter easily aggregate and thus create large secondary particles. To disperse magnetite nanoparticles, this study proposes the infiltration of magnetite nanoparticles into hybrid silica aerogels. The feasible dispersion of magnetite is necessary to target tumor cells and to treat hyperthermia. Magnetite NPs have been synthesized by coprecipitation, hydrothermal and thermal decomposition methods. In particular, monodisperse magnetite NPs are known to be produced by the thermal decomposition of iron oleate. In this study, we thermally decomposed iron acetylacetonate in the presence of oleic acid, oleylamine and 1,2 hexadecanediol. We also attempted to disperse magnetite NPs within a mesoporous aerogels. Methyltriethoxysilicate(MTEOS)-based hybrid silica aerogels were synthesized by a supercritical drying method. To incorporate the magnetite nanoparticles into the hybrid aerogels, we devised two methods: adding the synthesized aerogel into a magnetite precursor solution followed by nucleation and crystal growth within the pores of the aerogels, and the infiltration of magnetite nanoparticles synthesized beforehand into aerogel matrices by immersing the aerogels in a magnetite nanoparticle colloid solution. An analysis using a vibrating sample magnetometer showed that approximately 20% of the magnetite nanoparticles were well dispersed in the aerogels. The composite samples showed that heating under an inductive magnetic field to a temperature of $45^{\circ}C$ is possible.

• 폴리머
• /
• 제26권5호
• /
• pp.680-690
• /
• 2002

골 재흡수 치료를 목적으로 파미드로네이트를 지속적으로 방출하는 제형으로 제조하기 위하여 락타이드-글리콜라이드 공중합체 (PLGA, 락타이드 : 글리콜라이드 몰비 = 75 : 25, 분자량 20000 g/mole 및 90000 g/mole)를 이용하여 직접압축 성형방법으로 생분해성 웨이퍼를 제조하였다. 약물과 고분자의 함량비 웨이퍼의 두께, PLGA 분자량 등을 조절하여 PLGA 웨이퍼를 제조하였고 이들의 형태학적 특성과 방출거동 및 분해거동을 살펴보았다. 웨이퍼의 제조는 혼합된 분말을 웨이퍼 제작용 몰드에 넣은 후 프레스를 이용하여 일정 압력으로 일정시간 동안 상온에서 가압하여 제조하였다. 제조된 웨이퍼는 약물의 초기함량이 증가할수록 방출속도가 빠르게 나타났으며, 제형의 두께가 두꺼워질수록 시간이 경과함에 따라 약물의 방출속도가 증가하였다. 또한 고분자의 분자량이 큰 것이 작은 것에 비해 상대적으로 초기 약물 방출량이 적고 방출되는 속도 또한 느려져. 저분자보다 오랫동안 약물이 방출되었다. 이러한 약물전달 시스템은 압축성형방법에 의해 제조하므로 제조가 간단하고 약물방출속도를 정확하게 제어할 수 있으므로 이식을 위한 제형으로 제조시 유용하게 쓰일 것으로 예상되었다.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.404-410
• /
• 2009

In this study, research for physical and chemical characteristics were conducted through analysis of sediments, grading and heavy metals (e.g., Mn, Cu, Cd, Zn and Pb ) in sewers which are classified by drainage types. After that, cement solidification and yellow soil calcinations made heavy metals stabilized and then, ways of recycling it were examined. The grain size distribution of all sediments was relative graded. When evaluating heavy metal pollution through index of geoaccumulation (Igeo), Cu showed moderately pollution or strong pollution in forest and street site and Zn was assessed by moderately pollution in military, residential, and street site. Analysis of Pearson Correlation coefficient of heavy metal indicated that all items in street site have tight relationship respectively. Especially, Cd-Zn, Cu-Pb, Cu-Mn, and Pb-Mn have relationship at 99% confidence intervals in statistical analysis. Recycling it with cement solidification was satisfied with compressive strength standard under 55% deposit contents and Zn, Pb, Mn were stabilized effectively. If time and temperature plasticity and compressive strength would be standard, it is revealed that yellow soil calcinations is valuable aggregate when it has 50-60 Wt% contents. When considering economic feasibility and stabilization of heavy metals, cement solidification would be more appropriate than yellow soil calcinations as solution to recycling.

• 콘크리트학회지
• /
• 제2권4호
• /
• pp.91-98
• /
• 1990

시멘트콘크리트 포장의 세로줄눈 및 가로줄눈은 교통하중의 반복이동에 의한 포장슬래브의 단차현상을 억제하고, 하중, 온도 및 습도변화 등에 의하여 발생하는 응력 및 변형을 효율적으로 조절하기 위하여 설치된다. 그러나, 노반공극수의 동결융해, 지하수위의 변화, 줄눈부의 펌핑 및 단차현상으로 지반지지력이 저하되면 줄눈부에 국부적 응력집중이 발생하여 하중분산응력이 저하됨은 물론 포장의 공용성 및 안전성을 크게 위협하게 된다. 따라서 시멘트콘크리트 포장을 효율적으로 유지관리하고 사용성을 확보하기 위해서는 줄눈부의 하중전달특성을 보다 엄밀히 반영할 수 있는 해석모델이 정립되어야 하며, 이를 토대로 체계적인 유지관리 시스템이 개발되어야 한다. 이러한 관점에서 본 연구에서는 줄눈부의 거동을 다우얼바의 연결작용, 골재 맞물림작용 및 타이드키 작용으로 구분한 후, 포장체의 특성에 따라 이들의 영향을 포장슬래브의 구조해석에 선택적으로 반영시킬 수 있도록 해석프로그램을 개발하였다. 포장슬래브의 거동평가를 위하여 Winkler 기초모델 및 탄성지반 위에 놓인 판이론을 적용하였으며, 4절점 사각형 유한요소를 사용하여 줄눈요소의 강성 매트리스를 전 해석과정에 반영하였다. 한편, 본 연구의 해석결과를 Huang의 수치예에 비하여 Arlington 실험값에 더욱 근접된 경향을 보이므로 매우 효율적인 것으로 평가된다.