• 한국환경생태학회지
• /
• 제18권1호
• /
• pp.53-60
• /
• 2004

아파트단지 내부녹지가 온도변화에 미치는 영향을 파악하고자 서울시 서초구, 강남구, 송파구 등 한강 이남지역에 위치한 아파트단지중 36개 지역을 대상으로 연구를 수행하였다. 아파트단지 내부온도는 Landsat ETM＋영상 2scene을 분석하여 추정하였으며 온도변화 영 향요인으로는 토양피복유형과 건물밀도, 식생활력도로 구분하였다. 토양피복유형과 아파트단지내 온도와의 상관관계 분석결과 녹지율은 음(－)의 상관관계를, 불투수포장율은 양(＋)의 상관관계를 보였으며 건폐율은 유의성이 인정되지 않았다. 투수포장지를 녹지면적과 불투수포장면적에 각각 합산한 값과 온도값의 상관관계 분석결과 투수포장면적을 불투수포장면적에 합산하여 산출한 상관계수보다 녹지면적에 합산하는 것이 상관계수가 보다 높게 나타나 투수포장지역도 녹지지역과 함께 도시온도를 낮추는 요소로 작용하는 것으로 판단되었다. 건물밀도의 요소로 선정한 용적율은 온도값과 유의성이 없었으며 NDVl는 값이 높을수록 온도가 낮았다. 아파트단지내 온도분포모형 구축을 위해 투수＋녹지율, 녹지율, 건폐율, NDVI값을 독립변수로, 대상지온도를 종속변수로 한 회귀분석 결과 두 시기 영상 모두 독립변수 중 투수＋녹지율만이 회귀식에 채택되었으며 회귀식의 수정 결정 계수($R^2$)는 각각 41.4(2000년 9월)와 40.4(2001년 6월)이었다.

• 한국환경과학회지
• /
• 제21권10호
• /
• pp.1265-1274
• /
• 2012

This study was conducted to investigate the extraction characteristics including total polyphenol compound content (TPC) and the antioxidative effect of Rumex crispus root extract on commercial corn oil. Extraction yield was increased with extraction temperature but decreased with extraction ratio. No significant differences in aromatics content were found among the extracts prepared with various extraction conditions; extraction ratio, extraction temperature, extraction pH and composition of extractant. Total flavonoid content of the extract was increased with extraction temperature and extraction pH, and highest value of it was found when extractant composition of ethanol in water was 75%. Total polyphenol compound content (TPC) of the extract with 10 fold extraction ratio showed the highest value, but no significant difference in TPC was found with extraction temperature. Reducing power and DPPH (${\alpha}$,${\alpha}$-diphenyl-${\beta}$-picrylhydrazyl) radical scavenging ability (RSA) of the extract in spectrophotometric absorbance were decreased with extraction ratio but increased with extraction temperature and showed 63.1%~98.4% and 67.6%~86.7% of those of ascorbic acid in reducing power and DPPH RSA, respectively. The antioxidative effects of the extract on corn oil were 84.8~93.0% of that of commercial butylated hydroxytoluene, the antioxidant index value was highest when the ethanol composition to water in extractant was equal ratio.

• 한국연소학회지
• /
• 제20권3호
• /
• pp.21-26
• /
• 2015

This study was performed to provide the information of the combustion characteristics of n-butanol fuel in accordance with the n-heptane fuel mixing ratio. The closed homogeneous reactor model was used for the analysis. The analysis conditions were set to 800 K of the initial temperature, 20 atm of initial pressure and 1.0 of equivalence ratio. The results of analysis were compared in terms of combustion temperature, combustion pressure, CO, Soot and $NO_X$ emissions. The results of combustion and exhaust emission characteristics showed that ignition delay was decreased and the combustion temperature was increased as the n-heptane mixing ratio was increased. Also, the carbon monoxide(CO) was slightly decreased however, the soot and nitrogen oxides($NO_X$) increased a little in accordance with the n-heptane fuel mixing ratio. In addition, the pressure difference was almost the same in any conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.143-150
• /
• 1997

The maturity concept was adopted to predict the strength of concrete, which was subjected to same temperature conditions and variable curing conditions. Penetration test and compressive test were conducted to measure the initial and final setting time and the compressible strength of concrete specimen, respectively. Also, the temperature and time were recorded at some intervals of time for calculating the maturity. The initial and final setting were delayed as the w/c ratio increased and curing temperature decreased. The activating energy decreased as the w/c ratio increased. The relationships at the relative strength and the maturity were proposed at different w/c ratio for the same temperature curing condition, and these were applied for the variable curing conditions. The results indicated that the difference between the strength of the proposed and the specimen was big at 1 days's age but quite similar after 3 day's age.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.33-38
• /
• 2002

The indicated power of Stirling engine was affected by the heat exchange effectiveness of the regenerator. The temperature difference of working fluid between the expansion and the compression space of Stilting engine depends on the heat exchange effectiveness of the regenerator. The influence of the temperature ratio of expansion space to compression space of Stirling engine on the indicated power was analyzed by using Schmidt analysis in this study. In the Stirring engine, as the temperature ratio increased, the indicated power generally decreased. Therefor, it is necessary to develope the regenerator of high effectiveness. The actual indicated power was shown 64.9 percent of the predicted indicated power in maximum and 47.2 percent of that in minimum due to increased dead volume of engine, the loss of flow friction and heat transfer in the regenerator.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3208-3216
• /
• 1993

Heat transfer characteristics of the laminar oscillating flow in a circular pipe have been studied under the condition that the wall temperature of the pipe is distributed sinusoidally with the axial direction. The axial velocity was assumed to be uniform in radial direction and the temperature field was analyzed by means of the perturbation method. The results show that the difference between wall and section-time-averaged fluid temperature increases as the oscillating frequency increases and eventually converges to a constant value which is determined by the ratio of swept distance to the characteristic length of wall temperature distribution. Also it is shown that the dominant variable in the heat transfer process when swept distance ratio is greater than 1 is not thermal Womersley number(F) but thermal Womersley number multiplied by the square root of swept distance ratio. The variation of the time-averaged Nusselt number is obtained as a function of F. The results indicate that Nusselt number is proportional to $F_{\epsilon}^{1/2}$ when both of F and .epsilon. are much greater than 1.

• Applied Science and Convergence Technology
• /
• 제26권4호
• /
• pp.86-90
• /
• 2017

We have reported structural and optical properties of self-assembled InAs/GaAs quantum dot (QD) grown by molecular beam epitaxy with different arsenic to indium flux ratios (V/III ratios). By increasing the V/III ratio from 9 to 160, average diameter and height of the InAs QDs decreased, but areal density of them increased. The InAs QDs grown under V/III ratio of 30 had a highest-aspect-ratio of 0.134 among them grown with other conditions. Optical property of the InAs QD was investigated by the temperature-dependent photoluminescence (PL) and integrated PL. From the temperature dependence PL measurements of InAs QDs, the activation energies of $E_{a1}$ and $E_{a2}$ for the InAs QDs were obtained $48{\pm}3meV$ and $229{\pm}23meV$, respectively. It was considered that the values of $E_{a1}$ and $E_{a2}$ are corresponded to the energy difference between ground-state and first excited state, and the energy difference between ground-state and wetting layer, respectively.

• 한국작물학회지
• /
• 제58권2호
• /
• pp.107-112
• /
• 2013

고온발생시 과연 sink가 적은 것이 등숙에 유리한지를 검토하기 위해, 1. 등숙기간 동안 적온인 $22^{\circ}C$와 고온인 $27^{\circ}C$에 처리한 후 천립중 감소율과 현미완전미감소율 비교하여 국내품종들 중에서 고온등숙에 강한 품종(동안벼)과 약한 품종(일품벼)를 선발하였다. 2. 고온에 대한 두 품종의 차이를 이삭형태 관점에서 비교한 결과 동안벼와 일품벼는 약세영화와 강세영화간의 비율에서는 큰 차이가 없었으나 총영화수에서 일품벼가 더 많았다. 따라서, 많은 영화수를 고온에서의 천립중 감소의 원인으로 가정하여 영화수 조절을 통한 등숙특성 개선을 시도하였다. 3. 이를 위해 약세영화를 제거하여 영화수를 조절한 결과 천립중은 개선이 가능한 것으로 생각되었으나 현미완전미율에서는 효과가 없었다. 4. 따라서, 천립중은 동화산물의 공급균형과 관련된 문제로 추정되는 반면 현미완전미율은 영화 내부의 전분축적과 관련된 대사이상으로 생각되며, 고온 등숙 문제를 해결하기 위해 영화수를 조절하는 것은 한계가 있을 것으로 생각된다.

• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.9-19
• /
• 2007

Fluid temperature fluctuations in a mixing tee pipe were numerically analyzed by LES model in order to clarify internal turbulent flows and to develope an evaluation method for high-cycle thermal fatigue. Hot and cold water with an temperature difference $40^{\circ}C$ were supplied to the mixing tee. Fluid temperature fluctuations in a mixing tee pipe is analysed by using the computational fluid dynamics code, FLUENT, Temperature fluctuations of the fluid and pipe wall measured as the velocity ratio of the flow in the branch pipe to that in the main pipe was varied from 0.05 to 5.0. The power spectrum method was used to evaluate the heat transfer coefficient. The fluid temperature characteristics were dependent on the velocity ratio, rather than the absolute value of the flow velocity. Large fluid temperature fluctuations were occurred near the mixing tee, and the fluctuation temperature frequency was random. The ratios of the measured heat transfer coefficient to that evaluated by Dittus-Boelter's empirical equation were independent of the velocity ratio, The multiplier ratios were about from 4 to 6.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.124-128
• /
• 1999

Product background of cement, sand and coarse aggregate differ from country to country, so that thermal behaviour of concrete make a difference in high temperature. To cope with demand, this paper is a study on compressive strength for W/C 45%, 55% and 65% by using domestic portland cement, Han-river sand, sea sand and crushed-coarse aggregate. As a result, it is shown that it is estimating to the mechanical properties of heated concrete specimens under various W/C ratio.