DOI QR코드

DOI QR Code

Effect of Mixing Ratio of n-heptane Fuel on the Combustion Characteristics of n-butanol Fuel

n-heptane 연료 혼합비에 따른 n-butanol 연료의 연소 특성

  • Lim, Young Chan (Graduate School of Mechanical Engineering, Kongju National University) ;
  • Suh, Hyun Kyu (Graduate School of Mechanical Engineering, Kongju National University)
  • 임영찬 (공주대학교 기계공학과 대학원) ;
  • 서현규 (공주대학교 기계공학과 대학원)
  • Received : 2015.06.18
  • Accepted : 2015.08.31
  • Published : 2015.09.30

Abstract

This study was performed to provide the information of the combustion characteristics of n-butanol fuel in accordance with the n-heptane fuel mixing ratio. The closed homogeneous reactor model was used for the analysis. The analysis conditions were set to 800 K of the initial temperature, 20 atm of initial pressure and 1.0 of equivalence ratio. The results of analysis were compared in terms of combustion temperature, combustion pressure, CO, Soot and $NO_X$ emissions. The results of combustion and exhaust emission characteristics showed that ignition delay was decreased and the combustion temperature was increased as the n-heptane mixing ratio was increased. Also, the carbon monoxide(CO) was slightly decreased however, the soot and nitrogen oxides($NO_X$) increased a little in accordance with the n-heptane fuel mixing ratio. In addition, the pressure difference was almost the same in any conditions.

Keywords

References

  1. S.S. Moon, "Engine Research Trend in Japan : Diesel NOX After-treatment Technology", Auto Journal of KSAE, Vol. 36, No. 3, 2014, pp. 42-47.
  2. C.H. Park, C.M. Park, T.K. Ha, J.H. Kim, B.D. Min, "A Study on Combustion and Emission Characteristics Using Multiple Injection Strategy in a DI Diesel Engine", Transactions of KSAE, 2008, pp. 322-327.
  3. J.H. Jung, J.H. Kim, S.H. Kim, "A Inlet Optimization of Aftertreatment System for Diesel Engine with Taguchi Method", Transactions of KSAE, 2012, pp.145-151.
  4. H.G. Roh, H.S. Jeon, C.S. Lee, "Effect of multiple injection and injection pressure on the combustion and emission characteristics in a passenger car CRDI diesel engine" Transactions of KSAE, 2007, pp352-357.
  5. J.H. Lee, "After-treatment System Technologies for Light-Duty Vehicles", Auto Journal of KSAE, Vol. 35, No. 9, 2013, pp22-26.
  6. L. Chen, Y.K. Cheng, K.K. Song, "A study on Biodiesel Fuel of Engine Performance and emission characteristics in Diesel Engine", Transactions of KSAE, Vol. 22, No. 5, 2014, pp. 59-65.
  7. C.W. Lee, "A study on Engine Performance and Exhaust Emission Characteristics of Gasoline Engine using Bio-ethanol Blended Fuel", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, 2012, pp. 131-137
  8. Y.J. Lee, "Status of Biodiesel as a Diesel Fuel Alternative" Auto Journal of KSAE, Vol. 32, No. 4, 2010, pp. 22-29.
  9. Y.G. Oh, "Bio Fuel Production Using Micro Algae" Journal of Korea Organic Resource Recycling Association, Vol. 20, No. 4, 2012, pp. 41-58.
  10. D.M. Ha, S.K. Hong, "Measurement and Prediction of Autoignition Temperature of n-Butanol + n-Decane System", Journal of Korean Institute of Fire Sci. & Eng., Vol. 25, No. 6, 2011, pp. 184-189.
  11. Z. Sahin, O.N. Aksu, "Experimental investigation of the effects of using low ratio n-butanol/diesel fuel blends on engine performance and exhaust emissions in a turbocharged DI diesel engine" Renewable Energy, Vol. 77, 2015, pp. 279-290. https://doi.org/10.1016/j.renene.2014.11.093
  12. J.X. Zhang, S.D. Niu, Y.J. Zhang, C.L. Tang, X. Jiang, E.J. Hu, Z.H Huang, "Experimental and modeling study of the auto-ignition of n-heptane/butanol mixtures" Combustion and Flame, Vol. 160, No. 1, 2013, pp. 31-39. https://doi.org/10.1016/j.combustflame.2012.09.006
  13. J.H. Song, K.J. Kang, S.H. Ryu, G.M. Choi, D.J. Kim, "Observation on the Ignition Delay Time of Cool and Thermal Flame of n-heptane/alcohol Blended Fuel at Low Temperature Combustion Regime", Journal of KOSCO, Vol. 18, No. 4, 2013, pp. 12-20.
  14. J.H. Song, K.J. Kang, Z. Yang, X.C. Lu, G.M. Choi, D.J. Kim, "Investigation of the Ignition delay time with Changing the Blending Ratio of the Binary Fuel (n-heptane/n-butanol) at the EGR Condition", Transactions of KSAE, 2013, pp. 27-35.
  15. X.C. Lu, Z. Yang, X.X. Zhou, Z. Huang, "Autoignition and combustion characteristics of n-butanol triggered by low- and high-temperature reactions of premixed n-heptane", Journal of Fuel, Vol. 112, 2013, pp. 1-7. https://doi.org/10.1016/j.fuel.2013.05.037
  16. M.E. Baumgardner, S. Mani Sarathy, A.J. Marchese, "Autoignition Characterization of Primary Reference Fuels and n-Heptane/n-Butanol Mixtures in a Constant Volume Combustion Device and Homogeneous Charge Compression Ignition Engine" Journal of Energy Fuels, Vol. 27, 2013, pp 7778-7789. https://doi.org/10.1021/ef4015982
  17. H. Wang, R.D. Reitz, M.F. Yao, B.B. Yang, Q. Jiao, L. Qiu, "Development of an n-heptane-n-butanol- PAH mechanism and its application for combustion and soot prediction", Combustion and Flame, Vol. 160, No. 3, 2013, pp. 504-519. https://doi.org/10.1016/j.combustflame.2012.11.017

Cited by

  1. 고온, 고압의 분위기 변화가 n-butanol 및 n-heptane 연료의 연소 특성에 미치는 영향 vol.21, pp.1, 2016, https://doi.org/10.15435/jilasskr.2016.21.1.29