• Title/Summary/Keyword: Temperature Check

Search Result 578, Processing Time 0.03 seconds

IoT-based low-cost prototype for online monitoring of maximum output power of domestic photovoltaic systems

  • Rouibah, Nassir;Barazane, Linda;Benghanem, Mohamed;Mellit, Adel
    • ETRI Journal
    • /
    • v.43 no.3
    • /
    • pp.459-470
    • /
    • 2021
  • This paper presents a low-cost prototype for monitoring online the maximum power produced by a domestic photovoltaic (PV) system using Internet of Things (IoT) technology. The most common tracking algorithms (P&O, InCond, HC, VSS InCond, and FL) were first simulated using MATLAB/Simulink and then implemented in a low-cost microcontroller (Arduino). The current, voltage, load current, load voltage, power at the maximum power point, duty cycle, module temperature, and in-plane solar irradiance are monitored. Using IoT technology, users can check in real time the change in power produced by their installation anywhere and anytime without additional effort or cost. The designed prototype is suitable for domestic PV applications, particularly at remote sites. It can also help users check online whether any abnormality has happened in their system based simply on the variation in the produced maximum power. Experimental results show that the system performs well. Moreover, the prototype is easy to implement, low in cost, saves time, and minimizes human effort. The developed monitoring system could be extended by integrating fault detection and diagnosis algorithms.

Rotary Veneer Peeling of Some Softwoods and Its Veneer Drying (수종(數種)의 침엽수재(針葉樹材)의 로타리 단판(單板) 절삭(切削)과 건조(乾燥))

  • Jung, Hee-Suk;Lee, Nam-Ho;Yeo, Hwan-Myeong;Lee, June-Ho;Yoo, Tae-Kyung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.24 no.1
    • /
    • pp.34-47
    • /
    • 1996
  • Veneers of two nominal thicknesses, 1.5 and 2.5mm, were rotary peeled from Japanese larch (Larix leptolepis). Dahurian larch (Larix gmelinei) and Radiata pine (Pinus radiata) bolts unheated and heated in the water vat temperature of $66^{\circ}C$ by rising a final temperature at 10cm core of $60^{\circ}C$ to remain core diameter of 11.4cm. 1.5 and 2.5mm thick veneer cut from the heated Japanese larch were significantly thinner than those of the unheated bolt and 2.5mm thick veneer cut from the heated Dahurian larch were significantly thicker than that of the unheated bolt. 1.5mm thick Dahurian larch veneer and 1.5 and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts, respectively. Check distance on the loose side of 1.5mm thick veneer cut from the heated Radiata pine was significantly wider than that of the unheated bolt. However check distances on the loose side of 1.5 and 2.5mm thick Japanese larch and Dahurian larch veneers and 2.5mm thick Radiata pine veneers showed insignificant difference between the unheated and heated bolts. Also the depth of check on the loose side of three species showed insignificantly difference between the unheated and heated bolts. Arithmatic mean deviation($R_a$) and maximum height($R_{max}$) of the profile on the loose side of dried veneer by preheating the bolt compared with unheated bolts were different among apecies and between veneer thickness. The preheating treatment slightly affected qualities of these thin veneers such as 1.5 and 2.5mm. The yield of 2.5mm thick veneer from the heated radiata pine was significantly higher than that of the unheated bolt. However the yield of 2.5mm thick veneer for other two species and 1.5mm thick veneer for three species showed insignificant difference between the unheated and heated bolts. The yield of 2.5mm thick veneer for three species were higher than those of 1.5mm thick veneer. The average yields of green veneer of Japanese larch. Dahurian larch and Radiata pine were 57.1, 55.1 and 54.0 percent, respectively. Variables such as initial MC. drying time and veneer thickness had strong effect for Japanese larch veneer, less effect for Radiata pine veneer and nuch less effect on final MC for Dahurian larch veneer in jet drying. Correlation between the current MC and the drying time of Dahurian larch with low variation of initial MC was higher than those of Japanese larch and Radiata pine veneer with high variation of initial MC in high temperature drying. Thickness shrinkages of 2.5mm thick veneer for Japanese larch and Radiata pine were higher than those of 1.5mm thick veneers, but shrinkages of Dahurian larch veneer were similar between two nominal veneer thicknesses.

  • PDF

Variation in Cartenoid Pigment and lipids of the Arkshell, (Anadara broughtonii) according to the Environmental Factors of the Growing Area (서식환경요인에 따른 피조개육의 Carotenoid색소와 지질성분의 변화)

  • Ha, Bong-Senk;Kang, Dong-Soo;Kim, Yung-Gwan;Kim, Kui-Shik
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.18 no.1
    • /
    • pp.71-92
    • /
    • 1989
  • The seasonal variations of environmental sea water, arid carotenoid and lipid composition of reddish muscle tissue of arkshell, Anadara broughtonii in Chungmu and $Y{\check{o}}su-area$ were investigated. In the sea water, pH value, salinity, electrical conductivity of Chungmu and $Y{\check{o}}su-area$ were similar tendency, but water temperature in annual average at Chungmu-area was about $2^{\circ}C$ higher than that of $Y{\check{o}}su-area$. The concentration of nitrite-nitrogen, ammonia-nitrogen, phosphate-phosphours at Chungmu-area were slightly higher than those at $Y{\check{o}}su-area$. Meanwhile the concentration of silicate-silicious at $Y{\check{o}}su-area$ was about 2 times higher than that of Chungmu-area. The bacterial density of the sea water was ranged from 3.6 to 93/100ml for coliform and 3.0 to 15/100ml for fecal colifrom at Chungmu-area, but the coliform was ranged 7.3 to 150/100ml and the fecal coliform was ranged 3.6 to 20/100ml at $Y{\check{o}}su-area$. Among the coliform, 8.9% Escherichia coli, 33.9% Citrobacter freundii, 41.1% Enterobacter aerogenes groups were classified and 16.1% was not identified. In the hemoglobin content of reddish muscle tissue of arkshell, one from Chungmu-area was ranged from 1.1 to 2.5 g /dl and one from $Y{\check{o}}su-area$ was ranged from 1.7 to 4.4 g /dl. In total carotenoid content, 0.80 to 1.28mg/100 g muscle was in Chungmu-area and 0.45 to 0.99mg/100 g muscle was in $Y{\check{o}}su-area$. Among the carotenoid compositions, pectenolone content was 63.0% in annual average from Chungmu area and 59.6% from $Y{\check{o}}su-area$, 6.5% from Chungmu area and 18.9% from $Y{\check{o}}su-area$ in ${\beta}-carotene$, 9.9% from Chungmu-area and 9.1% from Yosu-area in pectenoxanthin, 11.2% from Chungmu-area and 5.2% from $Y{\check{o}}su-area$ in diatoxanthin monoester were observed. In the seasonal variation for the major carotenoids, the content of pectenolone was continuously incresedbefore spawning period and showed the maximum in July, but decresed after spawning period. Diatoxanthin monoester was gradually incresed during all growing period from March to next January. And ${\beta}-carotene$ was decresed before spawning period and showed the maximum in July but incresed after spawning period. The major fatty acids of total lipid and fractionated lipid classes from total lipid namely neutral-, glyco- and phospholipid were $C_{16:0},\;C_{18:1},\;C_{22:6},\;C_{20:2},\;C_{18:2},\;C_{20:5}\;and\;C_{18:3}$ acid in the muscle tissue of arkshell. The content of neutral lipid showed about 2 times higher than polar lipid in the muscle tissue of arkshell from both Chungmu and, $Y{\check{o}}su-area$. The content of total and neutral lipid was decresed during spawning period. In the seasonal variation for fatty acid compositions, the content of polyenenoic acid in total and neutral lipid was decresed and saturated acid was incresed. On contrary, polyenoic acid in glyco and phospholipid was incresed and saturated acid was decresed during spawning period from July to September. The sterol composition in total lipid were mainly consisted of cholesterol, campesterol, brassicasterol and ${\beta}-sitosterol$. Especially, the rate of content in cholesterol showed decrese during spawning period butcampesterol showed increse from March to November.

  • PDF

Study on the Establishment of Threshold Criteria for Heat Health Watch Warning System in Korea; Part II: Improvement of Criteria (고온건강경보시스템 기준 설정에 관한 연구 ( II ) - 설정 기준 개선 -)

  • Jung, Woo-Sik;Park, Jong-Kil;Kim, Eun-Byul;Song, Jeong-Hui
    • Journal of Environmental Science International
    • /
    • v.18 no.7
    • /
    • pp.781-796
    • /
    • 2009
  • The current standard level of Heat Health Watch Warning System consider both daily maximum temperature and daily maximum heat index(HI), but current standard could not consider daily maximum HI due to the difficulties in forecasting when we consider both daily maximum temperature and daily maximum HI and no considering HI because relative humidity could not observed for some regions. So, Newly established standard level of Heat Health Watch Warning System is based on daily maximum temperature exceeding $30^{\circ}C$ for two consecutive days or daily minimum temperature exceeding $25^{\circ}C$ and daily maximum temperature exceeding $30^{\circ}C$. These days are called "extreme heat days". On extreme heat days, the standard of extreme heat advisory is based on daily maximum temperature among exceeding $32.7^{\circ}C$ and not exceeding $34.8^{\circ}C$, and extreme heat warning is based on daily maximum temperature exceeding $34.8^{\circ}C$. ANOVA analysis was carried out using the data of Seoul Metropolitan City in 1994 to check the robustness of the new standard level of Heat Health Watch Warning System from this study, in particular for mortality variable. The results reveal that the new standard specifies excess mortality well, showing significance level of 0.05 in the difference of excess mortality for each phase.

Measurement of Mode I Fracture Toughness of Rocks with Temperature and Moisture Conditions at Low Temperature (저온하에서의 온도 및 함수 조건에 따른 암석의 모드 I 파괴인성 측정)

  • Jung, Yong-Bok;Park, Chan;Synn, Joong-Ho;Lee, Hi-Keun
    • Tunnel and Underground Space
    • /
    • v.11 no.4
    • /
    • pp.352-361
    • /
    • 2001
  • Mode I fracture toughness ( $K_{IC}$) of the frozen rocks and that of the frozen-thawed rocks were obtained by using BDT and CCNBD specimens. The test temperatures ranged from +$25^{\circ}C$ to -16$0^{\circ}C$. Wet and air-dry specimens of granite and sandstone were used in order to investigate the effect of water and porosity on fracture toughness. The SEM images of the frozen-thawed rocks were also analysed to check the density of thermal cracks. The $K_{IC}$ of the frozen rocks increased as the test temperature went down. The rate of increase was higher in wet condition than in dry condition and the rate of increase for wet granite was higher than that for wet sandstone. The $K_{IC}$ of the frozen-thawed rocks varied within 15% from the $K_{IC}$ of the rocks at room temperature. After one freeze-thaw process, thermal crack occurred in granite but no thermal cracks occurred in sandstone. And the crack density was increased as the temperature went down.n.

  • PDF

Low Temperature Hermetic Packaging by Localized Heating using Forced Potential Scheme Micro Heater (Forced Potential Scheme 미세 가열기를 이용한 부분 가열 저온 Hermetic 패키징)

  • 심영대;신규호;좌성훈;김용준
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.10 no.2
    • /
    • pp.1-5
    • /
    • 2003
  • In this project, the efficiency of localized heating for micro systems packaging is developed by using a forced potential scheme microheater. Less than 0.2 Mpa contact pressure was used for bonding with a 200 mA current input for $50{\mu}m$ width, $2{\mu}m$ height and $8mm{\times}8mm$, $5mm{\times}5mm$, $3mm{\times}3mm$ sized phosphorus-doped poly-silicon microheater. The temperature can be raised at the bonding region to $800^{\circ}C$, and it was enough to achieve a strong and reliable bonding in 3 minutes. The IR camera test results show improved uniformity in heat distribution compared with conventional microheaters. For performing the gross leak check, IPA (Isopropanol Alcohol) was used. Since IPA has better wetability than water, it can easily penetrate small openings, and is more suitable for conducting a gross leak check. The pass ratio of bonded dies was 67%, for conventional localized heating, and 85% for our newly developed FP scheme. The bonding strength was more than 25Mpa for FP scheme packaging, which shows that FP scheme can be a good candidate for micro-scale hermetic packaging.

  • PDF

Spatial and Temporal Variations of Phytoplankton in Ch$\check{o}$nsu Bay (천수만 식물 플랑크톤의 공간적, 시간적 변화)

  • Shim, Jae Hyung;Yeo, Hwan Goo
    • 한국해양학회지
    • /
    • v.23 no.3
    • /
    • pp.130-145
    • /
    • 1988
  • Spatial distribution and temporal variations of phytoplankton population were investigated in Ch$\check{o}$nsu Bay, the Korean western coast. Diurnal fluctuations of phytoplankton standing crop are associated with semidiurnal tidal cycle, as high concentration at low tide and low at high tide. In monthly variations of phytopolankton standing crop, the 1st peak occurrs in March and the 2nd one in August. The study area could be divided into two parts, outer bay and inner bay according to the physical and biological factors such as water temperature and salinity, and phytoplankton distribution patterns. The northern waters of the bay, however, may be affected by irregular fresh water influx through the lock of the dike. Because of the hydrographical differences among the surveyed stations, phytoplankton species succession patterns of each station have some differences. On the whole in this study area, Paralia sulcata and Skeletonema costatum are dominant species all the year round. However, except June, Paralia sulcata, a tychopelagic diatom is not dominant species at Station 6 (northern end of the bay). This seems to be caused by the fact that the waters of northern part of the bay is less turbulent than that of the outer bay. The result of principal component analysis (PCA) indicates that Ch$\check{o}$nsu Bay is normal coastal ecosystem where the environmental conditions are cycled in a year, and water temperature and nitrogenous nutrients such as nitrate, nitrite and ammonia are major factors to influence the annual cycle of environmental conditions.

  • PDF

Effects of the Knife-Incising and Longitudinal Kerfing Treatment on High-Temperature Drying Characteristics of Red Pine Square Timber (배할 및 자상-인사이징 처리가 소나무 정각재의 고온건조 특성에 미치는 영향)

  • Lee, Chang-Jin;Lee, Nam-Ho;Oh, Seung-Won
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.5
    • /
    • pp.677-684
    • /
    • 2016
  • This study was carried out to confirm the effects of the knife-incising and longitudinal kerfing treatment on high-temperature drying characteristics of red pine square timber with dimensions of thickness 15 cm. The range of final moisture content was investigated 5.6% to 7.5% after drying. The differences did not exist in the moisture content and distribution according to the pretreatment condition. In the case of longitudinal kerfing treatment, the surface check occurrence was reduced than the control. In addition, the twist had a tendency to decrease due to the longitudinal kerfing treatment. The knife-incising and longitudinal kerfing treatment were investigated to be ineffective on internal checks and drying shrinkage.

Analytical Solution for Transient Temperature Distribution in Fillet Arc Welding (필릿 용접 공정에서 온도 분포 예측을 위한 해석적 모델)

  • 정선국;조형석
    • Journal of Welding and Joining
    • /
    • v.13 no.2
    • /
    • pp.68-81
    • /
    • 1995
  • This paper presents an analytical solution to predict the transient temperature distribution in fillet arc welding. The analytical solution is obtained by solving a transient three -dimensional heat conduction equation with convection boundary conditions on the surfaces of an infinite plate with finite thicknesses, and mapping an infinite plate onto the fillet weld geometry with energy equation. The electric arc heat input on fillet weld and on infinite plate is assumed to have a traveling bivariate Gaussian distribution. To check the validity of the solution, GTA and FCA welding experiments were performed under various welding conditions. The actual isotherms of the weldment cross - sections at various distances from the arc start point are compared with those of simulation result. As the result shows a satisfactory accuracy, this analytical solution can be used to predict the transient temperature distribution in the fiIIet weld of finite thickness under a moving bivariate Gaussian distributed heat source. The simplicity and short calculation time of the analytical solution provides rationales to use the analytical solution for modeling the welding control systems or for an optimization tool of welding process parameters.

  • PDF

Development of Evaluating Technology for the Capability of Carrying Short-Circuit Current at Electrical Contacts in EHV Disconnecting Switches (초고압 단로기 접점의 단락전류 통전성능 평가기술 개발)

  • Oh, Yeon-Ho;Song, Ki-Dong;Chong, Jin-Kyo
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.57 no.1
    • /
    • pp.46-51
    • /
    • 2008
  • Extra-high voltage(EHV) disconnecting switch(DS) consists of the electrical contacts and mechanical parts which actuate the contacts. When the short-circuit condition occurs, a large amount of current flows through the electrical contact in disconnecting switches and this causes considerable temperature rise due to Joule heating. If the temperature rise is higher than the melting point of contact material, the DS contact becomes melting and cannot be usable anymore. For this reason, the analysis for capability of carrying short-circuit current in DS contacts must be performed at a design stage. Here, we proposed a numerical technique for evaluating the capability of carrying short-circuit current at electrical contacts in EHV DS. In this numerical approach, the mechanical and thermal analyses were simulated to check the capability of carrying short-circuit current. First, the applied pressure at contact parts was analyzed considering the mechanical properties, and then contact resistance was calculated by an empirical equation. Finally, thermal analysis was performed with resistance variation at electrical contacts. To verify these numerical results, the distributions of temperature in DS were experimentally measured and compared with each other. The results from experiments were agreed well with those from the proposed numerical simulations.