• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.31-35
• /
• 2011

Photovoltaic modules are well known to be one of the most eco generation of electricity. But usually study solar cell. Otherwise, PV modules are also important in power generation. We have to check other subsidiary materials. In this work benefit of using optically superior encapsulation materials(EVA) in generation temperature is demonstrated. Optical characterization of three EVA products demonstrates reduced transmission in the visible ray region of the solar spectrum. It will have a decisive effect to the module efficiency. Test is shown reduction of reflectance and transmittance. Reflections is dependent on the low iron glass. It can be seen between a specific wave length(240~350mm) about 1%. Transmittance in the entire ray region of light is markedly reduced to depending on the temperature rise. The graph is shown optical properties on EVA. Transmission was reduced. about 1%.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.281-288
• /
• 2001

In this study we carried out athermalization analysis and tests to meet the required optical performance for thennal imaging systems even if the systems were operating over a wide temperature range. By using optical design programs such as Code- V and SIGMA2100, the simulation for athermalization was done with FPA thermal imaging system. In the athermalization test putting the thermal imaging system and collimator into a temperature chamber, the images depending on the temperature were recorded on video tape. In particular, the zoom thermal imaging system with two dimensional array detector was tested to check the result of the athermalization simulation. As a result, it was proved to meet the required optical performance for the thermal imaging system within $-32-+50^{\circ}C$ temperature range. range.

• International Journal of Advanced Culture Technology
• /
• v.8 no.2
• /
• pp.246-251
• /
• 2020

Dimethyl Ether(DME) engine use a highly efficient alternative fuel having a great quantity of oxygen and has a advantage no polluting PM gas. The existing DME fuel cam material is a highly expensive carbide alloy, and it is difficult to take a price advantage. Therefore the study of replacing body area with inexpensive steel material excluding piston shoe and contact area which demands high characteristics is needed. The development of WC-Ni base carbide alloy optimal bonding composition technique was accomplished in this study. To check out the influence of bonding temperature and time, bonding characteristics of sintering temperature was experimented. The hardness of specimen and bonding rate were measured using ultrasound equipment. The bonding state of each condition was excellent, and the thickness of mid-layer, temperature and maintaining time were measured. The mid-layer thickness according to bonding temperature and maintaining time were observed with optical microscope. We analyzed the micro-structural analysis, formation of bonding specimen, wafer fabrication and fuel cam abrasion test. Throughout this study, we confirmed that the fuel cam for DME engine which demands high durability against velocity and pressure is excellent.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.2
• /
• pp.96-104
• /
• 2015

Reactivity of commercial WGS catalyst and four new catalysts(RMC-3, PC-73, PC-67SU, PC-59) manufactured with various compositions by Korea Electric Power Research Institute(KEPCO RI) were compared to select suitable WGS catalyst for SEWGS system. Steam/CO ratio, gas velocity, flow rates of syngas, and temperature were considered as operating variables. As a result, commercial catalyst showed the highest CO conversion and RMC-3 catalyst showed also high CO conversion. Therefore, commercial and RMC-3 catalysts were selected as applicable catalysts. However, PC-73 catalyst showed low CO conversion at low temperature($200^{\circ}C$) but showed good reactivity at high temperature($225{\sim}250^{\circ}C$), and therefore, PC-73 catalyst was selected as applicable catalyst for high temperature operation. Continuous operations up to 24 hours for those three catalysts(commercial, RMC-3, PC-73) were conducted to check reactivity decay of catalysts. All three catalysts maintained their original reactivity.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.1
• /
• pp.53-62
• /
• 2021

Batch type reduction-oxidation tests were performed to check effects of temperature, pressure, gas velocity, and capacity on reduction characteristics of mass produced particle in a 0.5 MWth chemical looping combustion system. The fuel conversion and the CO2 selectivity increased as the temperature increased and as the gas velocity decreased. However the CO2 selectivity showed the maximum and decreased as the capacity increased because the CO emission increased. The results show that high temperature, low gas velocity and low inert gas concentration are preferable to ensure high reactivity of oxygen carrier in the fuel reactor.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.726-731
• /
• 2013

Experiments were conducted to evaluate the effect of low temperature-darkness treatment on floral initiation in four kinds of Korean strawberry cultivars. Mother plants were planted on March 29 and daughter plants were raised for the experiment. Temperature treatment was done for 7, 14, and 21 days keeping $13^{\circ}C$ in cooling storage from August 29, September 5 and September 14 to September 21. After the treatment, flower bud initiation was examined by a microscope, and the seedlings were transplanted on hydroponic system with Yamazaki's strawberry solution of EC $0.8dS{\cdot}m^{-1}$ to check the flowering. 'Ssanta' and 'Maehyang' showed early flower bud initiation in 7 days treatment than 'Seolhyang' by microscope check. 'Ssanta', 'Daewang', and 'Maehyang' showed early flower bud initiation in 14 days treatment than 'Seolhyang'. There were no differences among the treatments in 21 days treatment. Percentage of flowering of 'Seolhyang' and 'Maehyang' by low temperature-darkness treatment didn't show any difference but 'Daewang' and 'Ssanta' showed high percentage of flowering. It suggested that low temperature-darkness treatment technique can be use for improving early flowering and yield of 'Ssanta' and 'Daewang' cultivars.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.292-301
• /
• 2016

Because damages arising from the occurrence of foot-and-mouth disease (FMD) are very great, it is essential to make a preemptive diagnosis to cope with it in order to minimize those damages. The main symptoms of foot-and-mouth disease are body temperature increase, loss of appetite, formation of blisters in the mouth, on hooves and breasts, etc. in a cow or a bull, among which the body temperature check is the easiest and quickest way to detect the disease. In this paper, an algorithm to detect FMD from the hooves of cattle was developed and implemented for preemptive coping with foot-and-mouth disease, and a hoof check test is conducted after the installation of a high-resolution camera module, a thermo-graphic camera, and a temperature/humidity module in the cattle shed. Through the algorithm and system developed in this study, it is possible to cope with an early-stage situation in which cattle are suspected as suffering from foot-and-mouth disease, creating an optimized growth environment for cattle. In particular, in this study, the system to cope with FMD does not use a portable thermo-graphic camera, but a fixed camera attached to the cattle shed. It does not need additional personnel, has a function to measure the temperature of cattle hooves automatically through an image algorithm, and includes an automated alarm for a smart phone. This system enables the prediction of a possible occurrence of foot-and-mouth disease on a real-time basis, and also enables initial-stage disinfection to be performed to cope with the disease without needing extra personnel.

• The Journal of Korean Medicine
• /
• v.31 no.1
• /
• pp.138-152
• /
• 2010

Objective: Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) is one of the representative prescriptions for invigoration of vitality and nourishing of the blood. This study was carried out to investigate the effects of Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) on hair regrowth and cytokine changes in a shaving model of C57BL6 mice. Method: Five-week-old mice were acclimated for 1 week at a temperature between $21-23^{\circ}C{\acute{E}}$, 40-60% relative humidity, and 12h of a light/dark cycle before beginning of the experiment. There were two groups including normal saline (control) and a positive control of oral intake of Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) extract (sample) in 18 female mice. The test compounds were topically treated once a day over 14 days. The hair regrowth was photographically and histologically determined during the experimental period of 14 days. Revelation of TGF-${\beta}1$ and EGF were also determined using immunohistochemistry. In addition to that, IFN-$\gamma$, IL-4 and IL-10 were determined in serum. Results: Hair regrowth in the sample group was promoted earlier and faster than the control group, as shown by concentrations of hairs and thick-hair ratio in the sample group. TGF-${\beta}1$ was not revealed in either control or sample group. EGF was strongly positive in out root sheath of some thick hair of the sample group. Serum IFN-$\gamma$ was significantly decreased in the sample group compared with the control group at 7 experimental days. However, it was not significantly decreased at 14 experimental days. Serum IL-4 was significantly increased in the sample group compared with the control group at 7 experimental days. However, it was not significantly decreased at 14 experimental days. Serum IL-10 was decreased in the sample group compared with the control group, but with no real statistical significance. Conclusion: These results suggest that Yikgeebohyul-tang (Yiqib$\check{u}$xu$\grave{e}$-t$\bar{a}$ng) has hair growth promoting activity and it can be used for treatment of alopecia. Also, these effects relate to EGF revelation of hair roots, a decrease in serum IFN-$\gamma$, and an increase of serum IL-4.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.159-166
• /
• 2012

We have developed a daytime measuring rotational Raman LIDAR system for temperature measurement. To decrease the background signal from sunlight, we have designed and installed narrow band (0.5 nm) and high rejection ($10^{-6}$) rate band pass filter system using a grating and an interference filter. We calibrated our system by comparing our horizontal temperature profile and KMA (Korea Meteorological Administration) data. We have found that our temperature profile has a good correlation with KMA data within our theoretically expected variance. And we have used these calibration values in obtaining a vertical temperature distribution. To check our system, we also have compared our vertical temperature data with US standard atmospheric temperature profile. We also have compared our temperature profile with sonde data.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.20-35
• /
• 2011

This study suggested the systematic steps for quality control, construction of the climatological reference series and homogeneity test and adjustment of temperature series in the Republic of Korea. It also attempted to evaluate more accurate magnitude of change using adjusted temperature data. All erroneous values produced by quality control were detected by internal inconsistency check. The method selected for homogeneity test in this study well defined fairly correct signals of station relocations. Therefore, this method might be regarded as the appropriate one to test homogeneity of temperature series of the Republic of Korea. The increase of temperature of the Republic of Korea after the adjustment were bigger than before the adjustment of annual and seasonal mean temperature. Adjusted temperature data produced by these steps will enable to evaluate more accurate characteristics and magnitude of climate change.