• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.2
• /
• pp.68-76
• /
• 1988

The variation of rumination response in steers fed a same amount of orcharograss hay was investigated. With three steers (6, 12, 24 months) of the Japanese Black Breed, rumination behaviour was measured continuously during a 5 days period by masseter EMG telemetry system. The results are summarized as follows: 1. The average daily ruminatio time of respective animals were 438,447 and 433 min. with small daily variation both within and among animal. But the rumination time per DM kg of hay consumed varied from 66 to 138 min., and calf spent longer than older calf. 2. Actural chewing time showed small variation, and percentage of actural chewing time spent in rumination time was from 88 to 93% on individual average. 3. The daily number of chewing in rumination was approximately 25,000 to 30,000 with large individual differences. The chews per DM kg intake varied from 3,800 to 9,600, and calf chewed more than older calf. 4. The average rate of chewing per 100 sec. (chewing speed), there was a large difference between animals I.e. 104, 114, 131 respectively, but very little variance between days in individual. 5. No relation between day to day variations in eating time and rumination behavior, but significantly positive correlation was observed in the relation among rumination time, chewing time, No. of boluses and No. of chews. 6. Active time of day in rumination altered considerably day to day, but variation in the amount of rumination per day as expressed by the rumination time was relatively small.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.46-46
• /
• 2003

Since its launching on 21 December 1999, the KOrea Multi-Purpose SATellite-Ⅰ (KOMPSAT-Ⅰ) has been successfully operated by the Mission Control Element (MCE), which was developed by the Electronics and Telecommunications Research Institute (ETRI). Most of the major functions of the MCE have been successfully demonstrated and verified during the three years of the mission life of the satellite. The Mission Analysis and Planning Subsystem (MAPS), which is one of the four subsystems in the MCE, played a key role in the Launch and Early Orbit Phase (LEOP) operations as well as the on-orbit mission operations. This paper presents the operational performances of the various functions in MAPS. We show the performance and analysis of orbit determinations using ground-based tracking data and GPS navigation solutions. We present four instances of the orbit maneuvers that guided the spacecraft from injection orbit into the nominal on-orbit. We include the ground-based attitude determination using telemetry data and the attitude maneuvers for imaging mission. The event prediction, mission scheduling, and command planning functions in MAPS subsequently generate the spacecraft mission operations and command plan. The fuel accounting and the realtime ground track display also support the spacecraft mission operations. We also present the orbital evolutions during the three years of the mission life of the KOMPSAT-Ⅰ.

• Journal of Korea Multimedia Society
• /
• v.22 no.11
• /
• pp.1280-1287
• /
• 2019

For developing a wireless implantable device to monitoring the artery variation in real-time. The concept of a special vessel variation measurement capacitive sensor is presented in this paper. The sensor consists of two part; main sensor to measuring the arterial variation, and reference sensor is used to improve the accuracy of the capacitance value variation. Before sensor manufacture, a model of the sensor attached on the artery was designed in 3D to conduct in the FEA simulation to validate the validity and feasibility of the idea. The artery model was designed as layered structures and made of collagenous soft tissues with intima inside, followed by the media and the adventitia. Also, a grease layer was designed in the inner of the arterial wall to imitate the clogged arteries. The simulation was divided into two parts; sensor performance test by changing the diameter of the grease layer, and arterial wall tension test by changing the blood pressure. As the simulation results, the capacitance value measured by the proposed sensor is decreased follow the diameter of the grease increased. Also, large elastic deformation of the arterial wall since changing the blood pressure has been observed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.7-15
• /
• 2002

This paper is concerned with remote environment monitoring & control for the breeding house as scattering far and wide. The environment data is detected in the breeding house that is collected to one processor. It's adapted to the PSTN(public switch tele-phone network) and multi-processing for exchange the environment data and the control data in between the manager and a breeding house by micro-processor. We have designed the algorithm of the communication sequence through the experimental research. This system is composed of sensor interface, FSK communications, LED display, data latch and MCS-51 single-chip. The S/W is composed with data acquisition by multi-processing, data communication and interrupt. And this paper is Proposed the DB structure algorithm concern to a mount scale using web design. The subject is a performance of effective management for the breeding house.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.372-375
• /
• 2004

The UV radiometer payload was launched successfully from the west coastal area of Korea Peninsula aboard KSR-III on 28, Nov 2002. KSR-III was the Korean third generation sounding rocket and was developed as intermediate step to larger space launch vehicle with liquid propulsion engine system. UV radiometer onboard KSR-III consists of UV and visible band optical phototubes to measure the direct solar attenuation during rocket ascending phase. For UV detection, 4 channel of sensors were installed in electronics payload section and each channel has 255, 290, 310nm center wavelengths, respectively. 450nm channel was used as reference for correction of the rocket attitude during the flight. Transmission characteristics of all channels were calibrated precisely prior to the flight test at the Optical Lab. in KARI (Korea Aerospace Research Institute). During a total of 231s flight time, the onboard data telemetered to the ground station in real time. The ozone column density was calculated by this telemetry raw data. From the calculated column density, the vertical ozone profile over Korea Peninsula was obtained with sensor calibration data. Our results had reasonable agreements compared with various observations such as ground Umkhr measurement at Yonsei site, ozonesonde at Pohang site, and satellite measurements of HALOE and POAM. The sensitivity analysis of retrieval algorithm for parameters was performed and it was provided that significant error sources of the retrieval algorithm.

• Journal of Drive and Control
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2015

The stability of friction characteristics and thermal management for a dry type dual clutch transmission (DCT) are inferior to those of a wet clutch. Too high temperature resulting from frequent engagement of DCT speeds up degradation or serious wear of the pressure plate or burning of the clutch disk lining. Even though it is significantly important to estimate the temperature of a dry double clutch (DDC) in real-time, few meaningful study of the thermal model of DDC has been known yet. This study presented a thermal analytical model of lumped parameters for a DDC by analyzing its each component firstly. Then a series of experimental test was carried out on the test bench with a patented temperature telemetry system to validate the proposed thermal model. The thermal model, whose optimal parameter values were found by optimization algorithm, was also simulated on the experimental test conditions. The simulation results of DDC temperature show consistency with the experiment, which validates the proposed thermal model of DDC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.485-487
• /
• 2017

With the growth of the IoT, security is a growing concern. Things the risk of IoT security has been constantly raised, and there have been many cases of hacking. As a result, there is a growing concern and scale about security, but there is a lack of interest and research on the message protocols between Iot devices. With the development of the IoT, the importance of low-power, lightweight and accurate message delivery will become more important and more advanced message protocols will be needed. In this paper, it is aimed to construct the system for communication between client and server of MQTT and CoAP with Confirmative option, which are most used among IoT message protocols and compare the message reliability of each communication protocol to check efficiency.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.80-90
• /
• 2000

To determine the effect of air pollutants in Taejon City, we used medical insurance claim data for asthma and the data monitored from telemetry system of Ministry of Environment for air pollutants and meteorological factors. From November 1st, 1997 to October 31th, 1998, 95,629 asthma patients were covered by medical insurance at Taejon City. Subjects were composed of 49,563 males (51.8%) and 46.336 females(48.2%), and among the subjects, the proportion under 15 years old was 62.8% of the total. During the study period, daily mean concentrations of each air pollutants-So2, No2, CO, O3 and TSP-were 9.8 ppb, 17.6 ppm, 1.414 pp, 17.3 ppb and 60.6 $\mu\textrm{g}$/㎥, respectively, which were lower than each of the environmental recommended exposure levels, Through the simple correlation analysis between each air pollutants and meteorological factors, O3 was positively correlated with temperature, but negatively with relative humidity. TSP, SO2, NO2, CO were negatively correlated with meteorological factors, and these air pollutants except O3 were positively correlated with each other, O3 was correlated with TSP positively but the others negatively. Estimating relative risks of each air pollutant with the baseline general additive model, daily mean concentrations of TSP(Lag 0, 1, 4, 5day) were significantly associated with the increase of the asthma admission. Two age subgroups, under 15 and 15~54 have shown various association of all air pollutants concentration with the asthma admission. However, in case of over 54 age subgroup, only TSP(Lag 0 day) among all air pollutants was associated with the asthma admission. Each of ambient outdoor pollutant concentrations in Taejon City are significantly associated with the admission of asthma patients even though all concentrations in Taejon City are significantly associated with the admission of asthma patients even though all concentrations were much lower than the environmental recommended exposure levels. Therefore, continuous effort lowering air pollutant concentration and introducing an active environmental conservation policy should be implanted for preventing hazardous health effects. Considering major proportion of asthma admissions, high susceptibility and less confounding factors among the age subgroup under 15 will be a useful target population for assessing such health effect monitoring.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.301-311
• /
• 2021

The technological advancements of the last two decades directed the era of the Internet of Things (IoT). IoT enables billions of devices to connect through the internet and share their information and resources on a global level. These devices can be anything, from smartphones to embedded sensors. The main purpose of IoT is to make devices capable of achieving the desired goal with minimal to no human intervention. Although it hascome as a social and economic blessing, it still brought forward many security risks. This paper focuses on providing a survey of the most commonly used application layer protocols in the IoT domain, namely, Constrained Application Protocol (CoAP), Message Queuing Telemetry Transport (MQTT), Advanced Message Queuing Protocol (AMQP), and Extensible Messaging and Presence Protocol (XMPP). MQTT, AMQP, and XMPP use TCP for device-to-device communication, while CoAP utilizes UDP to achieve this purpose. MQTT and AMQP are based on a publish/subscribe model, CoAP uses the request/reply model for its structuring. In addition to this, the quality of service provision of MQTT, AMQP, and CoAP is not very high, especially when the deliverance of messages is concerned. The selection of protocols for each application is very a tedious task.This survey discusses the architectures, advantages, disadvantages, and applications of each of these protocols. The main contribution of this work is to describe each of the aforementioned application protocols in detail as well as providing their thorough comparative analysis. This survey will be helpful to the developers in selecting the protocol ideal for their system and/or application.