• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.5
• /
• pp.1-6
• /
• 1973

The paper deals with a study on an electronic watering device. The system is designed to scan 10 probes so that they detect moisture of soil. Input potentials are compared with reference level before the system is watering. rt provides a main clock oscillator and a control oscillator for the system control, and a programmable unijunction transistor is used for the control circuit. The reference levels are adjustable so as to water various soils. The device is tested for two different sails of moisture content ranging from 6 to 51%. It works at any input level higher than 0.6 V compared to the reference level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.2
• /
• pp.104-109
• /
• 2010

In this paper, we propose a user authentication technology to protect wiretapping and attacking from others in the telematics environment, which users in vehicle can use internet service in local area network via mobile device. In the proposed user authentication technology, the packet speech data is encrypted by speech-based biometric key, which is generated from the user's speech signal. Thereafter, the encrypted data packet is submitted to the information communication server(ICS). At the ICS, the speech feature of the user is reconstructed from the encrypted data packet and is compared with the preregistered speech-based biometric key for user authentication. Based on implementation of our proposed communication method, we confirm that our proposed method is secure from various attack methods.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.3
• /
• pp.25-34
• /
• 1981

Aluminum anodization method has been investigated for fabricating charge coupled device(CCD) with two-level aluminum gate structure. Al2O3 films were formed to a thickness of 400-500A, by anodizing aluminum with 30-35V of anode voltage for 2 hours using 2 % ammonium tartrate solution as an electrolyte. Breakdown voltage of these films were about 30 volts. Using above mentioned Al2O3 film as an insulator between two aluminum electrodes, CCD transversal low pass filter has been fabricated. CCD transversal low pass filter with 17 tap coefficients has shown 22 dB stop-band attenuation. The operating clock frequency range of the fabricated device was from 3 KHz to 100 KHz.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.85-90
• /
• 1998

A 1 4 polymeric optical power divider based on the multimode interference effect is designed and fabricated. The two dimensional finite difference beam propagation method has been utilized in designing the device. Polymers used for the core layer and the cladding layer are Cyclotene-3022 and UV-15, respectively. The device is fabricated by the reactive ion etching method. The splitting ratio of the fabricated device is 0.93 : 1.00 : 0.93 : 0.90 for TE mode and 0.84 : 0.94 : 1.00 : 0.83 for TM mode. The advantages of this device are small size and low polarization-dependence.

• Journal of Computing Science and Engineering
• /
• v.5 no.3
• /
• pp.269-281
• /
• 2011

STEPSTONE is a joint industry-university project to create open source technology that would enable the scalable, "friction-free" integration of device-based healthcare solutions into enterprise systems using a Service Oriented Architecture (SOA). Specifically, STEPSTONE defines a first proposal to a Service Oriented Device Architecture (SODA) framework, and provides for initial reference implementations. STEPSTONE also intends to encourage a broad community effort to further develop the framework and its implementations. In this paper, we present SODA, along with two implementation proposals of SODA's device integration. We demonstrate the ease by which SODA was used to develop an end-to-end personal healthcare monitoring system. We also demonstrate the ease by which the STEPSTONE system was extended by other participants - Washington State University - to include additional devices and end user interfaces. We show clearly how SODA and therefore SODA devices make integration almost automatic, replicable, and scalable. This allows telehealth system developers to focus their energy and attention on the system functionality and other important issues, such as usability, privacy, persuasion and outcome assessment studies.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.130-138
• /
• 1996

The size of a device needs to scale down to increase its integrity and speed. As the size of the device is reduced, the hot-carrier degradation that severely effects on device reliabilty is concerned. In this paper, sub-micron buried-channel P-MOSFETs were fabircated, and the hot-carrier effects were invetigated. Also the hot-carrier effect in the buired-channel P-MOSFETs and the surface-channel P-MOSFETs were compared with simulation programs using SUPREM-4 and MINIMOS-4. This paper showed that the electric characteristics of sub-micron P-MOSFET are different from those of N-MOSFET. Also it showed that the punchthrough voltage ( $V_{pt}$ ) was abruptly drop after applying the stress and became almost 0V when the channel lengths were shorter than 0.6.mu.m. The lower punchthrough voltage causes the device to operte poorly by the deterioration of cut-off characteries in the switching mode. We can conclude that the buried channel P-MOSFET for CMOS circuits has a limit of the channel length to be around 0.6.mu.m.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.400-407
• /
• 1987

Thin film filter type 4-channel wavelength division multiplexing(WDM) device was designed and fabricated for the application in optical subscriber loop system. It has multi-mode fiber pigtails and four wavelength division consisting of 0.81, 0.89, 1.2 and 1.3 um. The evaluated performances are 1-2d B of insertion loss(connector loss excluded)and 30-35d B of crosstalk attenuation for all channels. The performance of the fabricated device was tested in the wideband optical transmission experiment, where the SNR degradation due to the crosstalk of the device was found to be within a measurement error.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.1
• /
• pp.5-11
• /
• 1978

Si-ZnSe n-n heterojunction was made by growing ZnSe thin film on the Si single crystal (111) surface with Bash evaporating method in vacuum. This heterojunction was found to be a useful device for frequency meter in the visible wave-length from the measuring of the photovoltaic effect of the heterojunction.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.8
• /
• pp.35-43
• /
• 1992

We have presented the tracing algorithm for center pixel of character image. Character image was read by scanner device. Performing the tracing process, it can be possible to detect feature points, such as branch point, stroke of 4 directions. So, the tracing process covers the thinning and feature point detection process for improving the processing time. Usage of suggested tracing algorithm instead of thinning that is the preprocessing of character recognition increases speed up to 5 times. The preprocessing chip has been designed by using single layer perceptron algorithm.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.8-17
• /
• 1992

In this paper a push-push oscillator using DR (dielectric resonator) at K-band is designed and constructed. Two identical oscillators are arranged in a push-push configuration that has the frequency of oscillator that is twice frequency each oscillator. A dielectric resonator is placed at the input of an active two-port device(FET) yielding a stable frequency source. The oscillators realized with this technique exhibit excellent spectral purity and cancellation of fundamental frequency.