• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.4
• /
• pp.16-23
• /
• 1983

A programmable controller (PC) which can control general sequential process is developed. The Z-8OA microprocessor-based PC includes hardwares such as programming device, input/output modules, timer/counter modules, and power-failure recovery module which for soft-ware, initialization program, monitor program, execution program, and power-failure recovery program are developed. In particular, the PC is designed in such a way that a timer can be used several times in different time intervals and a skip capability is incorporated in the user program to reduce scan time.

• Journal of Climate Change Research
• /
• v.6 no.2
• /
• pp.143-158
• /
• 2015

This study developed the emission intensity estimation method of GHGs by considering the characteristics of the models and time series. The telematics device was installed on the vehicle (OBD-II) to collect information on the operation conditions from each sample vehicle of public authorities. As a result of comparing the mileage distance and fuel consumption, the matching degree is analyzed very high, showed a ${\pm}1{\sim}4%$ error for each vehicle. By comparing driving record diary of vehicles managed by public authorities, this study presents the method that can be used to verify driving information in order to derive the GHGs emission intensity.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.801-806
• /
• 1986

The effect of SiH2Cl2 -HCl gas on the growth rate of epitaxial layer is studied. The temperature, pressure and gas mixing ratio of SiH2Cl2 and HCl are varied to study the growth rate dependence and selective Si epitaxy. The P-n junction diode is fabricated on the epitaxial layer and electrical characteristics are examined. Also, using selective Si epitaxy, a possibility of thin dielectric isolation process, that gives an independent isolation width on the mask dimension, is examined.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.820-832
• /
• 1986

In contrast to conventional liquid phase epitaxy of GaAs, surface kinetics limited growth is predominant in selective liquid phase epitaxy. For the stripe openings in the high-index crystal-lographic directions, the well-known facet formations and the decompositions into the low index planes or smooth circular surfaces are observed depending on the growth kinetics. For the low index direction stripe, surface kinetics limited growth is evident. By a numerical calcualtion we show that these phenomena are due to the enhanced masstransport by two dimensional diffusion and growth rate anisotropy which is found to be very stdrong with cusped minima for some singular planes in the solution growth as well as in vapor phase epitaxy. Morphological stability is briefly treated in terms of diffusion and its implications on device application are stated. Tese phenomena may be common to III-V compound semiconductors as well as GaAs.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.868-873
• /
• 1986

The Schottky barrier diode has been used as an element of the mixer inspite of its conversion loss. In this paper the use of a GaAs MESFET is shown as a device of mixer, and the conversion gain is obtained. Also, input matching circuits aredesigned by s-parameter and fabricated on a dielectric teflon epoxy fiber glass substrate. According to the results, the conversion gain is 9 dB at the signal frequency of 4 GHz and the intermediate frequency of 1.217GHz.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.484-489
• /
• 1986

A device with variable stepped oxide layer along the edge region of Schottky junction have been designed and fabricated. The effect of this stepped oxide layer in the edge region improves the breakdown voltage as a result of the by increase of the depletion layer width, and decreases the leakage current as compared to the effect of conventional field oxide layer, when the reverse voltage was applied. Experimental results shown that the Schottky diode with the the reverse voltage was applied. Experimenal results show that the Schottky diode with the optimal stepped oxide layer maintains nearly ideal I-V characteristics and excellent breakdown voltage(170V) by reducing the edge effect inherent in metal-semiconductor contacts. The optimal conditions of stepped oxide layer are 1700\ulcornerin thickness and 10\ulcorner in length.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.4
• /
• pp.93-102
• /
• 1995

This paper introduces a general purpose Associative Processor(AP) which is very efficient for search-oriented applications. The proposed architecture consists of three main functional blocks: Content-Addressable Memory(CAM) arry, row logic, and control section. The proposed AP is a Single-Instruction, Multiple-Data(SIMD) device based on a CAM core and an array of high speed processors. As an application for the proposed hardware, we present a parallel algorithm to solve a global routing problem in the layout process utilizing the processing capabilities of a rudimentary logic and the selective matching and writing capability of CAMs, along with basic algorithms such a minimum(maximum) search, less(greater) than search and parallel arithmetic. We have focused on the simultaneous minimization of the desity of the channels and the wire length by sedking a less crowded channel with shorter wire distance. We present an efficient mapping technique of the problem into the CAM structure. Experimental results on difficult examples, on randomly generated data, and on benchmark problems from MCNC are included.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2221-2229
• /
• 2006

Optimal path search algorithm which is a killer application of mobile device to utilize location information should consider traffic flows of the roads as well as the distance between a departure and destination. The existing path search algorithms, however, are net able to cope efficiently with the change of the traffic flows. In this paper, we propose a new optimal path search algorithm. The algorithm takes the current flows into consideration in order to reduce the cost to get destination. It decomposes the road network into Fixed Grid to get variable heuristics. We also carry out the experiments with Dijkstra and Ar algorithm in terms of the execution time, the number of node accesses and the accuracy of path. The results obtained from the experimental tests show the proposed algorithm outperforms the others. The algorithm is highly expected to be useful in a advanced telematics systems.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.734-744
• /
• 2013

In this study, the telematics device was installed on the car (OBD-II) to collect the information on the operation conditions from each sample vehicle. Based on the information the domestic driving pattern was analysed and the ratio of cold start length was estimated. As a result of analysis for driving pattern, we found a difference in the frequency of driving on the hourly or seasonal basis. Then, the driving pattern of the rush hours, weekdays, and weekends could be derived. Also, from the study, an average of 2.22 times per day occurred in a single trip and average driving distance for the trip was 15.72 km. In addition, the proportion of cold start length was analyzed to be 16.11%. The seasonal cold start length has big difference from season to season (Winter 26.63%, Summer 8.22%, Intermediate 12.65%). There was an inverse relationship between the outside temperature and ratio of cold start length. In order to improve the accuracy of the cold emission estimation, it is necessary to apply domestic ratio of cold start length that driving pattern and temperature in Korea is reflected.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.63-74
• /
• 2005

The telematics device, which is a typical embedded system on the transportation or vehicle, requires the embedded spatial DBMS based on RTOS (Real Time Operating System) for processing the huge spatial data in real time. This spatial DBMS can be developed very easily by SQL3 functions of the ORDBMS such as UDT (user-defined type) and UDF (user-defined function). However, developing index suitable for the embedded spatial DBMS is very difficult. This is due to the fact that there is no built-in SQL3 functions to construct spatial indexes. In this study, we compare and analyze both Generalized Search Tree and Relational Indexing methods which are suggested as common ways of developing User-Defined Indexes nowadays. Two implementations of R-Tree based on each method were done and region query performance test results were evaluated for suggesting a suitable indexing method of an embedded spatial DBMS, especially for telematics devices.