• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.35-40
• /
• 2019

In this research, we suggest a real-time tele-driving system for unmanned drone operations using the LTE communication system. The drone operator is located 180km away and controls the altitude and position of the drone with a 50ms time delay. The motion data and video from the drone is streamed to the operator. The video is played on the operator's head-mounted display (HMD) and the motion data emulates the drone on the simulator for the operator. In general, a drone is operated using RF signal and the maximum distance for direct control is limited to 2km. For long range drone control over 2km, an auto flying mode is enabled using a mission plan along with GPS data. In an emergency situation, the autopilot is stopped and the "return home" function is executed. In this research, the immersion tele-driving system is suggested for drone operation with a 50ms time delay using LTE communication. A successful test run of the suggested tele-driving system has already been performed between an operator in Daejeon and a drone in Inje (Gangwon-Do) which is approximately 180km apart.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.295-296
• /
• 2009

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.227-229
• /
• 1999

이동로봇에 통신 기술을 결합하여 응용하려는 시도는 Tele-Robotics라는 학문의 한 분야로 이미 국내외적으로 정착되고 있다. 초기에 Tele-Robotics.Tele-Operation 기술은 극한작업을 위해서만 사용되었으나, 최근에는 일상생활과 밀접한 다양한 분야로 그 응용분야를 넓혀가고 있다. 본 논문에서는 대화식 무선통신 기능을 가진 이동로봇을 제작하고 그와 통신할 수 있는 호스트 시스템을 구성하여 이동 로봇의 원격 제어, 원거리에서의 지형 탐색, 데이터 수집 기능 등을 구현함으로써 본격적인 원격 탐색 시스템 구축을 위한 기초 연구를 수행하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.70-77
• /
• 2002

Necessity of the tole-operation has been increased in many fields. Since the Internet is inexpensive and available all over the world, it is a strong candidate for the transmission media of the tole-operation. However, the Internet has random time delays that may cause instability in the system especially if the tole -operation is bilateral. In the past few years many attempts have been made to overcome the random time delay, So far, they are still insufficient in terms of performance. The ‘Variable holding time’ is introduced to improve the performance of the ‘Event based tole-operation’ which controls a system with a non-time action reference. By holding each event for proper time, the system can quickly respond and be stabilized. The proper holding time should be selected based on the characteristics of the task that the system performs. The factors that reflect those characteristics are investigated. The fuzzy logic is employed to obtain the proper holding time for each event while the tole-operation system is in operation. The experimental results presented in this paper verify effectiveness of the proposed method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.55-61
• /
• 2009

This paper proposes a position estimation of a mobile robot based on USN(Ubiquitous Sensor Network) and encoder, and development of tele-operation system using Internet. USN used in experiments is based on ZigBee protocol and has location estimation engine which uses RSSI signal to estimate distance between nodes. By distortion the estimated distance using RSSI is not correct, compensation method is needed. We obtained fuzzy model to calculate more accurate distance between nodes and use encoder which is built in robot to estimate accurate position of robot. Based on proposed position estimation method, tele-operation system was developed. We show by experiment that proposed method is more appropriate for estimation of position and remote navigation of mobile robot through Internet.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.692-697
• /
• 2003

The researches on the Internet based tole-operation have received increased attention for the past few years. In this paper, we implement the Internet based tele-operating system. In order to transmit robustly the surroundings and control information of the robot, we make a data as a packet type. Also in order to transmit a very large image data, we use PEG compressive algorithm. The central problem in the Internet based tele-operation is the data transmission latency or data-loss. For this specific problem, we introduce an autonomous mobile robot with a 2-layer fuzzy controller. Also, we implement the color detection system and the robot can perceive the object. We verify the efficacy of the 2-layer fuzzy controller by applying it to a robot that is equipped with various input sensors. Because the 2-layer fuzzy controller can control robustly the robot with various inputs and outputs and the cost of control is low, we hope it will be applied to various sectors.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.386-390
• /
• 1998

A master-slave system is proposed as a teaching device for a dual arm robot. The slave robots are remotely controlled by two delta-type master arms. In order to help the operator to observe the target object from the desired position and desired direction, cameras are mounted on a specialized manipulator, Movements of two slave arms are coordinated with that of the cameras. Due to this coordinated movements, the operator needs not to care the geometrical relation between the cameras and the slave robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.821-824
• /
• 1993

In hazardous conditions, where entry of human operators is restricted, such as high radiation regions in nuclear facilities, a lot of remote inspections and remote handling tasks must be performed. In this study, the stereo imaging system has been developed and the remote handling technique, has been studied to enhance the efficiency of tele-operation. The nozzle dam handling robot is one of the most important robots applied to nuclear facility. The robot will be equipped with the developed stereo imaging system. The stereo imaging system will outstandingly improve the tele installing/removal tasks for nozzle dam.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1465-1468
• /
• 1996

In this paper, we suggest tele operation system of reclaimers and some side technologies for performing easy operation. The reclaimers in the raw ore yard are being used to dig ironstone and transfer it to the blast furnaces. The side technologies are to determine the minimum stacking distance between piles, collision avoidance of reclaimers and stackers. For simplicity, the pile and the boom of the reclaimer are mathematically modeled as a cone and a line in the 3-dimensional space respectively. The minimum stacking distance is obtained using the condition that the cone and the line never met. The modeling errors for the pile and reclaimers are compensated by considering the width of their reclaimer. We have also proposed a 2-stage collision detection method for the moving machines. The reclaiming heights of the pile are set to predetermined ones to make tele-operation easy.

• Journal of Practical Engineering Education
• /
• v.10 no.2
• /
• pp.113-118
• /
• 2018

The most important thing in vocational education and training is to enhance students' interest and understanding of the whole process of the production site. In this paper, we present a case on the implementation of tele-operation robot hand by learning factory based technology convergence education. It also suggests some points to be taken when applying the learning factory in the future curriculum. In order to implement the tele-operation robot hand, it is necessary to support the compulsory subjects of university level courses in domestic curriculum such as mechanic design, motor control, local communication implementation, sensing and feedback control. The educational research presented in this paper guides the students with the skills they need and understands the skills through self-study and practice, and implements the final products. This study will be useful as a base data when introducing the training process of training factory in the future.