• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.1
• /
• pp.31-42
• /
• 2024

In this study, the methodology of determination of base bleed motor data for base bleed projectile based on the NATO standard trajectory model, especially STANAG 4355 Method 2 were presented. Ground combustion experiments and aerodynamic performance firing tests were conducted to determine the drag reduction motor data of the base bleed projectile and this data was described based on the NATO standard ballistic model. The derived drag reduction motor data were input into the ballistic equations to complete the ballistic model and it was confirmed that the calculated predicted trajectory from the ballistic model matched well with the measured trajectory from the aerodynamic performance firing tests.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.7
• /
• pp.1276-1280
• /
• 2017

The mcr-1 gene is a new "superbug" gene discoverd in China in 2016 that makes bacteria highly resistant to the last-resort class of antibiotics. The mcr-1 gene raised serious concern about its possible global dissemination and spread. Here, we report a potential anti-resistant strategy using the CRISPR/Cas9-mediated approach that can efficiently induce mcr-1 gene knockout in Escherichia coli. Our findings suggested that using the CRISPR/Cas9 system to knock out the resistance gene mcr-1 might be a potential anti-resistant strategy. Bovine myeloid antimicrobial peptide-27 could help deliver plasmid pCas::mcr targeting specific DNA sequences of the mcr-1 gene into microbial populations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.2
• /
• pp.75-82
• /
• 2008

In order to establish environmentally friendly phosphorus(P) and potassium(K) fertilizer application rates for rice cultivation in Korea, a field experiment was conducted in two different characterized paddy soils, higher and lower P and K content in soil from 2005 to 2006 in Suwon, Korea. Chuchong which is typical rice variety in Korea, was selected for experiment. Rice yields in base P-K fertilizer level ($30-30kg\;ha^{-1}$) and no P-K fertilizer level were 97~98% and 93~97% of standard P-K fertilizer level ($45-57kg\;ha^{-1}$), respectively. At the lower content of P and K in immatured paddy soil, the yield of no P plot was decreased by 7% compared to that of standard P-K plot. Significant difference in rice yield and yield characteristics was found neither in standard P-K fertilization plot nor in base P-K fertilization plot. There was no significant difference in P and K uptake at the harvest stage between standard P-K fertilizer plot and base P-K fertilizer plot. Phosphorus and K uptake was slightly decreased in no fertilizer plots compared to standard fertilizer plot. Phosphorus and K use efficiency of rice plant in base fertilizer plot was higher than that in standard fertilizer plot. Available phosphorus and exchangeable potassium content in soil at the harvest stage were increased in both standard and base fertilizer plot. But no significant difference of P and K content in ? was found between standard fertilizer plot and base fertilizer plot. Rice quality characteristics such as proportion of brewers rice, damaged kernel, broken rice, and content of amylose and protein were lowered in the base fertilizer plot than the standard fertilized plot, while the proportion of perfect kernel increased in the base fertilizer plot From the results, we generally recommend the base P-K fertilization ($30-30kg\;ha^{-1}$) instead of standard P-K fertilization ($45-57kg\;ha^{-1}$) for rice cultivation in Korea.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.304-312
• /
• 2009

Automated design system of injection mold was developed in this study. Shapes of mold parts and mold base were defined according to standards of mold components and database modules of mold components were built. And then an automation program of mold design was developed by the user definition features, family table and Pro/Program of Pro/Engineer. The automatic production divided into mold base and standard parts was manipulated to manufacture parts meeting the design requirements and the selected parts were changed in size and shape to meet the design goals. The mold design was also carried out to have organic relations and be easy in case of a change to the mold part or mold base. As a result, it is possible to design the mold efficiently and conveniently modify the designed mold parts and base by using the developed automated design system in this study.

• Electronics and Telecommunications Trends
• /
• v.34 no.3
• /
• pp.86-92
• /
• 2019

New products and services, such as 5G and wireless power transmission equipment, have recently brought about changes in the field of electromagnetic technology. There is a need for the evaluation and measurement of the health effects of such technology. To address this need, the development of international standards related to human exposure to electromagnetic waves of these new technologies are currently being discussed. This article briefly introduces the International Standard Organization standards for human exposure to electromagnetic waves, and focuses on the major standard trends for SAR measurement techniques that employ vector probes, wireless power transfer, and 5G base station measurement.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1660-1668
• /
• 2008

The WiBro was adopted to the 3G international standard. By the change of specification from Wave 1 to Wave 2, MIMO technology is applied in order to increase the speed of downlink. By MIMO the RF part of WiBro base station is increased to 2 Tx paths. Therefore, the size of RF part is bigger and material cost is increased. For reducing these demerits, the RF part which is consisted of PA, LNA, and TDD switch is designed to one complex RF unit. Also, the experimental results of the RF unit have been discussed. Since the complex RF unit is more compact than the RF part of Wave 1 base station, it can be used as the RF part of Wave 2 base station with 2T/2R MIMO.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.423-429
• /
• 2009

The motion base to a film used in 4D cinema theaters or theme parks is different depending on the operator's control or hardware system and this causes inefficiency in management of the theater. There are several different simulation software on the present market, but these are difficult for an animation producer to use them. This study introduces the idea in which a film producer simulates the movement of the motion base by using computer graphic animation tools mostly adopted by production for creating 3D animation and motion control data. Maya and 3D Cross were used to show the path of a motion camera visually. Attitude and axis control data were extracted from the movement of the virtual motion base and were used to control a prototype of the motion base. As a result, the motion control data from computer graphic animation tools can be created so that a film producer can create standard motion control data independently regardless of the hardware and operator's skill.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.791-795
• /
• 2006

Urban transit is one of the most effective ways for efficient operation and construction of an urban transit by composition system which is liked originally such as rolling-stock, power, signal and infrastructure. Urban rail transit system is running in domestic, imports major equipments from advanced countries and setup for maintenance. But it takes long time because it does each organizations and lines. Also, signal, power and track system apply different standard by each construction organizations it causes an increasing construction of cost accordingly it desperately needs a systematic countermeasure. Therefore standard specification of urban transit have been establishing and operatingfor efficient operation of urban transit and base technology security that is populace ride to become a base of state economy. After track, power and signal system will be announced. Standard specification become more, the importance of administrationof standards is emphasized more. Specification administrator’s the importance which use a computing support tool recently in railroad part in embossed and is predicted to be more such forward. Therefore we propose the effective method of management with track, power signal system by constructed data-base system.

• Korean Journal of Labor Studies
• /
• v.23 no.1
• /
• pp.85-127
• /
• 2017

Due to the management innovation policy that was introduced to governmentsupported research institutes (GSRI) in 1998, their employment structure has been continuously changing, with the most notable increase of the number of non-standard researchers and the diversification of employment contracts. This paper examines changes in the employment structure of GSRI over the last 20 years in relation to the introduction and operation of the PBS (project base system), which is a main factor that fundamentally changed the employment structure of research institutes. This paper purposes to analyze the current status of non-standard workers in the science and technology research area through interviewing standard and non-standard researchers. Under the PBS as a principle of organizing their research project, the project-managers cannot help but exploit non-standard researchers to process research within a tight budget. This structure of organizing research projects reinforces the increase of the number of non-standard researchers and diversification of non-standard employment relations. In addition, the wage and working conditions of non-standard workers are getting aggravated in this structure. Considering the characteristics of research institutes, precarious status of non-standard researchers will have negative effects on the development of science and technology.

• Archives of design research
• /
• v.14 no.1
• /
• pp.177-186
• /
• 2001

It is true that the new development in digital technology has Influenced on the definition of animation like it did on the other fields of an, but this doesnt mean this development drastically changes the traditional concept and replaces it with innovative new one. The more the technology is being developed, the mon it needs traditional base that can lead it to what it originally should be. As an example, computer animation companies are constantly seeking for people who have traditional animation background rather than well-trained computer oriented artists. This means digital technology will be no more a technological threat to the people who has traditional animation background. Consequently, when considering the extended concept caused by this new technology, we have to find its base on the traditional animation concept. Since we dont have any fundamental base in traditional animation and technological base in computer animation, we should consider those in advanced countries as a standard. However, in these days, there is a tendency to worship the words themselves such as "digital revolution", "information technology" etc., not the basics behind them. We cannot expect any achievement with this in mind. This study might be a short cut to the students and animators who want to learn and approach computer animation in a right wav.