• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.3970-3990
• /
• 2021

In view of the problems of insufficient data collection and processing capability of multi-source heterogeneous equipment, and low visibility of equipment status at the ship block construction site. A data collection method for ship block construction equipment based on wireless sensor network (WSN) technology and a data processing method based on edge computing were proposed. Based on the Browser/Server (B/S) architecture and the OneNET platform, an online monitoring system for ship block construction equipment was designed and developed, which realized the visual online monitoring and management of the ship block construction equipment status. Not only that, the feasibility and reliability of the monitoring system were verified by using the intelligent tire frame system as the application object. The research of this project can lay the foundation for the ship block construction equipment management and the ship block intelligent construction, and ultimately improve the quality and efficiency of ship block construction.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.138-147
• /
• 2022

The synergistic effect of 2-chloromethylbenzimidazole (2-CBI) and potassium iodide (KI) for mild steel in 1 M hydrochloric acid solution was investigated by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). The results showed that, with the addition of 100 ppm potassium iodide, the inhibition efficiecy (IE) of 100 ppm 2-CBI in 1 M hydrochloric acid had been improved from 91.14% to 96.15%. And synergistic parameter of 100 ppm 2-CBI with different amounts of potassium iodide is always greater than 1. The adsorption of potassium iodide combining with 100 ppm 2-CBI obeys to the Langmuir adsorption isotherm. Thermodynamic adsorption parameters, including ∆G⁰_ads, ∆H_a and ∆S_a of the adsorption of the combinned inhibitor, as well as the E_a of the mild steel corrosion in 1 M HCl with the combinned inhibitor, were calculated.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.255-256
• /
• 2020

인물에 대한 얼굴 이미지 데이터를 수집할 때 유효하지 않은 데이터를 수작업으로 걸러내는 것은 많은 시간과 인력의 투자를 필요로 한다. 얼굴 데이터 셋을 생성할 때 FaceNet을 거쳐 불필요한 정보들을 미리 걸러내고, 사람이 직접 얼굴 데이터의 유효성을 체크하는 수고를 덜어 얼굴 데이터 셋 생성에 있어서의 번거로움을 줄이고자한다. 본 논문에서는 FaceNet을 통해서 얼굴 이미지 데이터에 대한 데이터 수집 시, 더욱 좋은 성능으로 정제된 데이터 셋을 생성하고자 하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.2
• /
• pp.70-73
• /
• 2015

Many studies have used chemical vapor deposition (CVD) to grow graphene. However, CVD is inefficient in terms of production costs, and inefficient for mass production because a transfer process using a catalytic metal is needed. In this study, graphene thin films were grown on single crystal sapphire substrates without a catalytic metal, using pulsed laser deposition (PLD) to resolve these problems. In addition, the growth of graphene using PLD was confirmed to have a close relationship with the substrate temperature.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.53-56
• /
• 2003

For identifying how a sample knit fabric is woven a method to obtain positional information of each yarn of the sample from voxel data made out of its x-ray CT images is newly proposed in this paper. The positional information is obtained by tracing the each yarn. The each yarn is traced by estimating a direction of the yarn in a certain small region in which the yarn can be regarded as straight and moving the region slightly along the estimated direction alternately. The yarn direction is estimated by correlating the voxel data in the region with a three-dimensional yarn model. The effectiveness of this method is confirmed by applying the method to voxel data made out of CT images of a knit fabric experimentally.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.256-259
• /
• 2003

This paper presents the analyses of Auto CAD plot file for carving machine. The plot file is first analyzed and then sorted to properly perform a sequence of the line segments. The experimental results show that this technique can improve the carving performance, reduce the operating time, and save the tool and machine’s lifetime. In addition, this proposed technique can also be extended to apply for other coordinate machines.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.252-255
• /
• 2004

This paper presents a new technique to generate the 1-bit signal by decoding Pulse Width Modulation (PWM) signal to a binary file before programming onto the ROM. Since each PWM signal requires only 1-bit digital signal, PWM signal and other forms of digital signal related to multi-bit can be simply generated. The results demonstrate that using this new technique to generate the PWM signal can simplify the process and hardware complication. Moreover, the signal's data and frequency can be easily modified by programming the data onto the ROM and using the counter, respectively, which can reduce the size of the circuit and make the PCB easier.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.921-926
• /
• 2003

This paper describes a new type of the spatial filter detector (SFD) with variable and multi-valued weighting function. This SFD called variable spatial filter detector with multi-valued weighting function (VSFDwMWF) uses current-mode circuits for noise resistance and high-resolution weighting values. Total weighting values consist of 7bit, 6-signal bit and 1-sign bit. We fabricate VSFDwMWF chip using Rohm 0.35${\mu}$m CMOS process. VSFDwMWF chip includes two-dimensional 10${\times}$13 photodiode array and current-mode weighting control circuit. Simulation shows the weighting values are varied and multi-valued by external switching operation. The layout of VSFDwMWF chip is shown.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.207-207
• /
• 2003

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.78-83
• /
• 2020

Recently, the use of domestic products securing domestic technology is encouraged, because of export restrictions of the countries or DMSMS(diminishing manufacturing sources and shortages). Domestic weapon systems are actively focused on the parts localization process of R&D projects based on Systems Engineering. However, it is the only way to do technical review for Systems Engineering process up to now. There is a case of application in Localization with Systems Engineering process, but the SE activity is not enough. This study is how to apply Systems Engineering process to Localization effectively based on real cases.