• Annals of Geriatric Medicine and Research
• /
• v.22 no.4
• /
• pp.167-175
• /
• 2018

Sarcopenia, a common clinical syndrome in older adults, is defined as decreased muscle mass, strength, and physical performance. Since sarcopenia is associated with the incidence of functional decline, falls, and even mortality in older adults, researchers and health care providers have been keen to accumulate clinical evidence to advocate the screening and prevention of sarcopenia progression in older adults. The factors that may accelerate the loss of muscle mass and function include chronic diseases, inactivity, and deficiency in appropriate nutritional support. Among these, nutritional support is considered an initial step to delay the progression of muscle wasting and improve physical performance in community-dwelling older adults. However, a nationwide study suggested that most Korean older adults do not consume sufficient dietary protein to maintain their muscle mass. Furthermore, considering age-associated anabolic resistance to dietary protein, higher protein intake should be emphasized in older adults than in younger people. To develop a dietary protein recommendation for older adults in Korea, we reviewed the relevant literature, including interventional studies from Korea. From these, we recommend that older adults consume at least 1.2 g of protein per kg of body weight per day (g/kg/day) to delay the progression of muscle wasting. The amount we recommend (1.2 g/kg/day) is 31.4% higher than the previously suggested recommended daily allowance (i.e., 0.91 g/kg/day) for the general population of Korea. Also, evidence to date suggests that the combination of exercise and nutritional support may enhance the beneficial effects of protein intake in older adults in Korea. We found that the current studies are insufficient to build population-based guidelines for older adults, and we call for further researches in Korea.

• The Korean Journal of Urological Oncology
• /
• v.16 no.3
• /
• pp.110-118
• /
• 2018

Purpose: The aim of this study is to confirm the detection rate of transperineal biopsy after multiparametric magnetic resonance imaging (mpMRI) and compared it to that of transrectal biopsy. We also examined the role of mpMRI and the rate of complications for each method. Materials and Methods: In a retrospective study, we analyzed 147 patients who underwent mpMRI before prostate biopsy because of elevated serum prostate-specific antigen and/or abnormal digital rectal examination findings at Korea University Hospital, Seoul, Korea from March 2017 to April 2018. Regions on the mpMRI that were suggestive of prostate cancer were categorized according to the Prostate Imaging-Reporting and Data System (PI-RADS v2). For transperineal biopsy, a 20-core saturation biopsy was performed by MRI-TRUS cognitive or fusion techniques and a 12-core biopsy was performed in transrectal biopsy. Results: Sixty-three and 84 patients were enrolled in transperineal group and transrectal group, respectively. The overall detection rate of prostate cancer in transperineal group was 27% higher than that in transrectal group. Classification according to PI-RADS score revealed a significant increase in detection rate in all patients, as the PI-RADS score increased. Frequency of complications using the Clavien-Dindo classifications revealed no significant differences in the total complications rate, but two patients in transrectal group received intensive care unit care due to urosepsis. Conclusions: Our results confirmed that transperineal biopsy is superior to transrectal biopsy for the detection of prostate cancer. From the complication point of view, this study confirmed that there were fewer severe complications in transperineal biopsy.

• 대한공업교육학회지
• /
• v.44 no.1
• /
• pp.162-189
• /
• 2019

The purpose of this study is to develop and apply a Design Thinking-based Maker education program utilizing Arduino for middle school students. The study progress was made in four stages of preparation, development, implementation and evaluation according to the PDIE model. In this study, experts were verified for validity and pre-applied to students to improve the maker education program developed based on literature review. Then, it was applied to middle school club classes to check the effects through analysis of quantitative and qualitative data. In addition, the development of the program was completed by supplementing the improvements found in the course. The results of this study are as follows. First, the topics of the maker education program that can be used in middle schools were selected in consideration of the analysis of the 2015 revised curriculum, methods to using the Arduino, and social interest. Second, the program developed based on the selected topic consists of 4 classes of maker basic learning and 16 classes of design thinking-based maker activities. Third, the developed maker education program had a significant effect in improving STEAM literacy of middle school students, but did not have any significant effect in the interest in technology and orientation towards an engineering career. Fourth, learners were interested in the activities of designing and freely making by themselves, and they positively evaluated the experience of realizing the physical computing with Arduino. In addition, they practiced the spirit of a maker, such as autonomously collecting data and sharing them with colleagues, etc. while acting as a maker.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.8-17
• /
• 2018

A large urban region in Bangkok, Thailand is often inundated due to shallow water floods along the paved roads that have poor drainage facilities, and that can cause urban flooding. Existing methods, including using sand bags are not effective to prevent flooding in urban areas where the amount of sand is not sufficient. Thus, it is necessary to install artificial flood defense structures. However flooding and overflow defense equipment, which was developed in some advanced nations in Europe and in the USA, is highly expensive and complex construction methods are needed, therefore they are not suitable to be used in Southeast Asia. Thus, it is necessary to develop a flood rapid defense system(FRDS), which is inexpensive and simple to build, but is also highly functional. Thus, this study developed an FRDS that can be applied to Southeast Asia through the careful study of FRDS overviews, an analysis on the development trends in Korea and overseas, and the proposal of development needs and directions of the region. For the system developed, Korean Standards(KS) performance evaluations on leakage ratio deformation tests and impact resistance tests were conducted at the Outdoor Demonstration Test Center(Seosan) in the Korea Conformity Laboratories(KCL) and the system satisfied the standards of KS F 2639(leakage and deformation test) and KS F 2236(impact resistance test). The present study results can not only be applied to urban floods in Southeast Asian nations to cope with flood-related disasters, but also be utilized in flood prone regions and for major facilities in Korea. They can also induce scientific and pro-active responses from major local governments and facility management organizations in relation to urban floods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.750-757
• /
• 2018

The mechanically stabilized earth wall abutment is an earth structure using a mechanically stabilized earth wall and it uses in-extensional steel reinforcements having excellent friction performance. In order to analyze the pullout behavior of in-extensional steel reinforcements usually applied on the mechanically stabilized earth wall abutment, effects of stiffness and particle-size distributions of backfills and also horizontal spacings were considered in this study. As a result of parametric analyses, the highest pulling force acted on the uppermost reinforcement, and the stiffness and the particle-size distributions of the backfill significantly affected the pulling resistance of the reinforced soils. The internal friction angle of backfills should be at least 25 degrees, the coefficient uniformity factor should be at least 4, and the horizontal spacing of the uppermost steel reinforcement should be less than 25cm. Therefore, in order to secure the pullout resistance of the reinforced soil, it is necessary a properly spacing of reinforcement and more strict quality control for the backfill.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.65-81
• /
• 2019

This study analyzed the relationship of land cover type, urban temperature in Gimhae city, Gyeongsangnam-do, South Korea. Date were used for land cover map, MODIS LST, and detailed temperature data on the Korean Peninsula based on RCP between 2000 and 2010. The correlation between urban area and surface temperature was 0.417, 0.512 for agricultural area and -0.607 for forest area. The correlation between surface temperature and air temperature was 0.301. The relationship with air temperature was analyzed as 0.275 for urban area, agriculture area 0.226, forest area 0.350. Urban and agricultural areas showed increased surface and air temperature as the area increased, while forest areas showed opposite improvements. In structural equation models, urban and agricultural areas had direct effects on the rise of surface temperature, whle forest areas had direct effects on the reduction of air temperature. In the future, it is necessary to use measured temperature data near the surface to understand the relationship between surface temperature and temperature according to the changes in spatial characteristics, which will prepare measures for urban heat island mitigation at the level of urban and environmental planning.

• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.237-244
• /
• 2019

Background: Street vendors spend relatively more time near roadways and are vulnerable to air pollution related health disorders. However, there is limited information on the quality of the air they breathe. The objectives of this present study were to calculate the mass concentration of atmospheric particulate matter (PM) in eight size fractions ($PM_{0.4-0.7}$, $PM_{0.7-1.1}$, $PM_{1.1-2.1}$, $PM_{2.1-3.3}$, $PM_{3.3-4.7}$, $PM_{4.7-5.8}$, $PM_{5.8-9.0}$, and $PM_{9.0--0{\mu}m}$) at commercial (CML) and residential site (RSL) in Dehradun city from November 2015 to May 2016. To estimate the corresponding respiratory deposition dose (RDDs) in alveolar (AL), tracheobronchial (TB), and head airway (HD) region on street vendors working at CML and RSL. To find the association of atmospheric PM with RDDs and the incidence of respiratory related disorders among street vendors. Methods: Andersen cascade impactor was employed for calculating the PM mass concentration. Questionnaire based health survey among street vendors were carried out through personal interview. Results: A significant difference (p < 0.05; t-test) between the mean $PM_{0.4-10{\mu}m}$ mass concentration at CML and RSL was observed with ($mean{\pm}SD$) $84.05{\pm}14.5$ and $77.23{\pm}11.7{\mu}g\;m^{-3}$, respectively. RDDs in AL, TB and HD region at CML was observed to be 9.9, 7.8, and 7.3% higher than at RSL, respectively. Health survey revealed 1.62, 0.96, 0.04, and 0.57 times higher incidence of cold, cough, breathlessness, and chest pain, respectively with street vendors at CML compared to RSL. Conclusion: The site characteristics plays a major role in the respiratory health status of street vendors at Dehradun.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.573-585
• /
• 2019

The objective of this study is to propose the drainage system that has been improved the workability, waterproofing and drainage performance to treat the leakage from the cement concrete structures in underground. It is improved that the pipe for conveying ground leak in the existing drainage system had the problem in workability and waterproof. The drainage systems with the improved pipe for conveying ground leak were constructed in conventional concrete lining tunnels to evaluate the workability, waterproofing and drainage. The waterproof and the drainage performance of the drainage system was evaluated by injecting 1,000 ml of red water in the back of the drainage system at 3 weeks, 6 weeks, 9 weeks, 11 weeks, 14 weeks, 17 weeks and 23 weeks. During 6 months of field performance test, the average daily temperature of the tunnel site was measured from $-12.4^{\circ}C$ to $19.7^{\circ}C$. The daily minimum temperature was $-17.2^{\circ}C$ and the daily maximum temperature was $26.7^{\circ}C$. There was no problem in waterproof and drainage performance on the pipe for conveying ground leak and the drainage system during 6 months for field performance test. It is concluded that the improved drainage system can be applied to various cement concrete underground structures where leakage occurs, and has little seasonal effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.598-603
• /
• 2019

Three-dimensional shape measurement technology is used in various industries. Among them, optical three-dimensional shape measurement techniques based on the optical trigonometry are mainly used in the field of semiconductor product inspection, where large quantities of three-dimensional shape measurements are made daily in factories and fine measurements are also required. The light source and the drive circuit, which are components of three-dimensional measurement equipment based on this optical trigonometry, produce heat generated by prolonged operation, and may be exposed to conditions where the ambient temperature is not constant, resulting in temperature-induced measurement errors. In this study, the compensation method of the Thermal Errors for Phase Measuring Profilometry is proposed. Three-Dimensional Shape Measurement Equipment based on Phase Measuring Profilometry is implemented to measure the height of an object and ambient temperature for 10 Hours, and a regression line was obtained line by making simple linear regression using measured temperature and height values. This regression line was used to correct the error of the height measurement according to the temperature, and thermal error was from 139.88 um(Micrometer) to 13.12 um.

• Journal of Broadcast Engineering
• /
• v.24 no.4
• /
• pp.670-675
• /
• 2019

AM radio broadcasting has the advantage that the sound quality is lower than that of FM radio but the service area is wide and at night it can be transmitted even to overseas due to ionospheric reflection. AM radio broadcasts usually transmit large amounts of several tens to several hundreds of kilowatts (KW), requiring a lot of power, which is a financial burden on broadcasters. Recently, it is required to introduce a way to reduce the power of AM radio broadcasting in Korea. Therefore, it is possible to save a certain amount of power compared to the conventional AM radio broadcasting, and it is possible to maintain the existing license service area and sound quality, and what policies are needed to introduce the technology. In this paper, we predict the reduction of transmission power when a high efficiency transmission system is applied to existing AM radio broadcasting transmission system. As a result of the research, AMC adopting the high efficiency transmission method instead of the conventional AM radio transmission method, and when the modulation ratio of AM radio is 70%, if -3 dB companding is applied, the annual transmission power charge is decreased from 5,185,838,160Won to 3,528,900,086Won with saving of 32.0%, When -6 dB companding is applied, it is expected to be reduced to 2,608,378,934Won, which is 49.7% savings.