• Journal of Embryo Transfer
• /
• v.27 no.3
• /
• pp.127-131
• /
• 2012

This study was performed to investigate the effects of parity and season on the embryo production in superovulated Hanwoo cows. Superovulation was performed from 1 to 8 times by repeated superovulation treatment of Hanwoo cows (n = 22). Irrespective of estrous cycle, donor cows were received a CIDR, progesterone (50 mg) and estradiol benzoate (2.5 mg). After 4.5 days, the donor cows were superovulated with total 28AU FSH (Antorin R-10) administrated twice daily in a decreasing dose for 4 days. On $6^{th}$ and $7^{th}$ of FSH injection, 2.5 mg and 15 mg $PGF_2{\alpha}$ were injected i.m, respectively. CIDR was removed at the $7^{th}$ FSH injection. The donor cows received $200{\mu}g$GnRH at 48 hrs after $1^{st}$ $PGF_2{\alpha}$ injection. The donor cows were artificially inseminated three times after estrous detection at 12 hr intervals and embryos were recovered 7 days after estrous detection. The mean number of total ova, transferrable embryos, degenerated embryos and unfertilized oocytes were $11.6{\pm}7.9$, $5.5{\pm}4.4$, $3.0{\pm}3.3$ and $2.6{\pm}4.1$ per donor cows, respectively. A higher number of total ova were recovered in parity 3~5 ($14.3{\pm}1.3$) than 1~2 ($8.9{\pm}1.9$, P<0.05). The number of recovered normal embryos is significantly higher in parity 3~5 ($7.3{\pm}0.8$) than that of over 6 ($3.7{\pm}1.5$). Significantly higher number of total ova and normal embryos were recovered in summer ($16.4{\pm}2.3$, $8.1{\pm}1.4$) than in autumn ($10.1{\pm}1.8$, $4.5{\pm}1.1$) and winter ($6.3{\pm}1.8$, $3.3{\pm}1.1$), respectively (P<0.05). Transferable embryos were significantly higher in summer ($7.6{\pm}1.3$) than in winter ($3.0{\pm}1.0$, P< 0.05). The results were showed that parity and season affecting on the production of embryos in superovulated Hanwoo.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.343-356
• /
• 2016

The Korea Radioactive Waste Agency (KORAD) has developed a dual-purpose metal cask for the dry storage of spent nuclear fuel that has been generated by domestic light-water reactors. The metal cask was designed in compliance with international and domestic technology standards, and safety was the most important consideration in developing the design. It was designed to maintain its integrity for 50 years in terms of major safety factors. The metal cask ensures the minimization of waste generated by maintenance activities during the storage period as well as the safe management of the waste. An activation evaluation of the main body, which includes internal and external components of metal casks whose design lifetime has expired, provides quantitative data on their radioactive inventory. The radioactive inventory of the main body and the components of the metal cask were calculated by applying the MCNP5 ORIGEN-2 evaluation system and by considering each component's chemical composition, neutron flux distribution, and reaction rate, as well as the duration of neutron irradiation during the storage period. The evaluation results revealed that 10 years after the end of the cask's design life, $^{60}Co$ had greater radioactivity than other nuclides among the metal materials. In the case of the neutron shield, nuclides that emit high-energy gamma rays such as $^{28}Al$ and $^{24}Na$ had greater radioactivity immediately after the design lifetime. However, their radioactivity level became negligible after six months due to their short half-life. The surface exposure dose rates of the canister and the main body of the metal cask from which the spent nuclear fuel had been removed with expiration of the design lifetime were determined to be at very low levels, and the radiation exposure doses to which radiation workers were subjected during the decommissioning process appeared to be at insignificant levels. The evaluations of this study strongly suggest that the nuclide inventory of a spent nuclear fuel metal cask can be utilized as basic data when decommissioning of a metal cask is planned, for example, for the development of a decommissioning plan, the determination of a decommissioning method, the estimation of radiation exposure to workers engaged in decommissioning operations, the management/reuse of radioactive wastes, etc.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.170-175
• /
• 1980

A mass production of chestnut necessiates the development of economic long-term storage method. The main objective of this study was to confirm the technical aspect of the chestnut storage method which was developed by two year project and to review the method of commercial application. The chestnut used for the experiments were separated in brine $(5.5{\sim}6.0^{\circ}\:B{\acute{a}}ume)$ into matured and unmatured lots and fumigated with $CS_2$ at a 5 $lb/27\;m^3$ level for $25{\sim}30\;hrs.$ The chestnuts were packed in wooden boxes with sawdust (50% moisture) in the ratio of 1 : 1 by volume. The boxes were stored in the cold room $(1{\pm}1^{\circ}C,\;85{\sim}95%\;RH)$ and the cellar ($0{\sim}10^{\circ}C$, controlled only by circulating night cool air). The results obtained were as follows: 1. Fully matured chestnut could be successfully preserved $8{\sim}9\;months$ at a l0% decay level in the cold room and $4{\sim}5\;months$ months in cellar. 2. Immatured chestnuts wire inferior to the matured in storage stability. At the maximum storage period, its storage life was two months shorter. 3. The heat transfer equation of piled chestnuts with sawdust can be suggested as $T_{\infty}-T_0=(T_{\infty}-T_0){\cdot}10^{-t/320}$ and j and $f_h$ values were 1 and 320 min, respectively. 4. The chestnuts in the package of storage unit had longer shelf life than naked chestnut during the retail distribution at ambient temperature.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.21-43
• /
• 2001

The environment to development information system including a GIS has been drastically changed in recent years in the perspectives of the complexity and diversity of the software, and the distributed processing and network computing, etc. This leads the paradigm of the software development to the CBD(Component Based Development) based object-oriented technology. As an effort to support these movements, OGC has released the abstract and implementation standards to enable approaching to the service for heterogeneous geographic information processing. It is also common trend in domestic field to develop the GIS application based on the component technology for municipal governments. Therefore, it is imperative to adopt the component technology considering current movements, yet related research works have not been made. This research is to propose a component-based GIS development methodology-ATOM(Advanced Technology Of Methodology)-and to verify its adoptability through the case study. ATOM can be used as a methodology to develop component itself and enterprise GIS supporting the whole procedure for the software development life cycle based on conventional reusable component. ATOM defines stepwise development process comprising activities and work units of each process. Also, it provides input and output, standardized items and specs for the documentation, detailed instructions for the easy understanding of the development methodology. The major characteristics of ATOM would be the component-based development methodology considering numerous features of the GIS domain to generate a component with a simple function, the smallest size, and the maximum reusability. The case study to validate the adoptability of the ATOM showed that it proves to be a efficient tool for generating a component providing relatively systematic and detailed guidelines for the component development. Therefore, ATOM would lead to the promotion of the quality and the productivity for developing application GIS software and eventually contribute to the automatic production of the GIS software, the our final goal.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.365-370
• /
• 2012

In this study, Economic analysis of supercritical coal-fired power plant with $CO_2$ capture process was performed. For this purpose, chemical absorption method using amine solvent, which is commercially available and most suitable for existing thermal power plant, was studied. For the evaluation of the economic analysis of coal-fired power plant with post-combustion $CO_2$ capture process in Korea, energy penalty after $CO_2$ capture was calculated using the power equivalent factor suggested by Bolland et al. And the overnight cost of power plant (or cost of plant construction) and the operation cost reported by the IEA (International Energy Agency) were used. Based on chemical absorption method using a amine solvent and 3.31 GJ/$tonCO_2$ as a regeneration energy in the stripper, the net power efficiency was reduced from 41.0% (without $CO_2$ capture) to 31.6% (with $CO_2$ capture) and the levelized cost of electricity was increased from 45.5 USD/MWh (Reference case, without $CO_2$ capture) to 73.9 USD/MWh (With $CO_2$ capture) and the cost of $CO_2$ avoided was estimated as 41.3 USD/$tonCO_2$.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.181-186
• /
• 1988

This experiment was conducted to examine the $PGF{2{\alpha}}$-induced changes in concentrations of ovarian and pituitary hormones of Korean native goats. Each goats received two injections of $PGF{2{\alpha}}$ (5mg each ; 3 hours apart) on day 10 of the estrous cycle. Jugular venous blood samples were collected at 0, 3, 6, 12, 24, 48 and 72 hours postinjection for quantification of LH, FSH, prolactin, progesterone and estradiol-$17{\beta}$. The results were summarized as follows ; The blood serum concentration of progesterone was decreased from pretreatment level of $4.15{\pm}1.8ng/ml$ to $2.52{\pm}1.2ng/ml$ (about 60%) within 3 hours and to $0.81{\pm}0.3ng/ml$ at 12 hours of the $PGF{2{\alpha}}$ injection. After 12 hours, the concentrations of progesterone were less than 1.02ng/ml by 72 hours postinjection. The concentrations of estradiol-$17{\beta}$ following treatment increased (p < 0.05) over the 72 hours. Initial concentration of LH was $3.0{\pm}0.3{\mu}IU/ml$. After treatment with $PGF{2{\alpha}}$, concentrations of LH increased within 12 hours but declined 12 and 72 hours from $4.1{\mu}IU/ml$ to $2.5{\mu}IU/ml$. Prior to administration of $PGF{2{\alpha}}$, mean concentration of FSH was $3.5{\pm}0.5{\mu}IU/ml$. Concentrations of FSH declined over time in goats treated with $PGF{2{\alpha}}$ on day 10 postestrus. The mean prolactin concentrations in the blood serum after $PGF{2{\alpha}}$ treatment were not significantly different from those of the pretreatment. It is concluded that the initial increase in LH is dependent on a decrease in serum progesterone and differences in patterns of secretion of gonadotropins might be caused by differences in progesterone or progesterone-estradiol ratio when luteal regression is induced on day 10 of the estrous cycle.

• The Korean Journal of Malacology
• /
• v.19 no.1
• /
• pp.41-51
• /
• 2003

Reproductive cycle with the gonadal development of Ruditapes philippinarum can be classified into five successive stages by histological observations: early active stage (January to March), late active stage (February to May), ripe stage (April to August), partially spawned stage (May to October), and spent/inactive stage (August to February). Changes in total protein contents in the adductor muscle tissues reached the maximum in the early and late active stages (February) and appeared the minimum in the ripe and partially spawned stages (May), while changes in their contents in the visceral mass tissues reached the maximum in the ripe and partially spawned stages (June) and gradually decreased in the partially spawned stage (June to October). On the whole, changes in total protein contents showed a negative correlationship between the adductor muscle and visceral mass tissues (r = -0.292, p < 0.05). Changes in total lipid contents in the adductor muscle tissues reached the maximum in the inactive and early active stages (January) and sharply decreased in the early and late active stages (February), while their contents in the visceral mass tissues reached the maximum in the ripe and partially spawned stages (April) and gradually decreased in the partially spawned stage (to October). On the whole, changes in total lipid contents showed a negative correlationship between the adductor muscle and visceral mass tissues (r = -0.699, p<0.05). Changes in glycogen contents in the adductor muscle tissues reached the maximum in the late active and ripe stages (April) and rapidly decreased in the partially spawned stage (May to October), while their contents in the visceral mass tissues reached the maximum in the early and late active stages (February) and rapidly decreased in the late active stage (March). Thereafter, their levels gradually increased in the ripe and partially spawned stages (April to July). On the whole, changes in glycogen contents appeared no correlationship between the adductor muscle and visceral mass tissues (r = 0.062, p > 0.05). These results indicate that the adductor muscle and visceral mass tissues are an important energy storage and nutrient supply organ in the Manila clams, and the nutrient contents of the adductor muscle and visceral muscle tissues change in response to gonadal energy needs.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.89-117
• /
• 2018

The Korean companies are intensifying competition with not only domestic companies but also foreign companies in globalization. In this environment, it is essential activities not only for large companies but also Small and Medium Enterprises (SMEs) to get and develop the core competency. Particularly, SMEs that are inferior to resources of various aspects, such as financial resources etc., can make innovation through effective R&D investment. And then, SMEs can occupy a competency and can be survive at the environment. Conventionally, the method of "self-development" by using only the internal resources of the company has been dominant. Recently, however, R&D method through cooperation, also called "Open Innovation", is emerging. Especially SMEs are relatively short of available internal resources. Therefore, it is necessary to utilize technology and resources through cooperation with external companies(such as joint development or contract development etc.) rather than self-development R&D. In this context, we confirmed the effect of SMEs' factors on sales in Korea. Specifically, the factors that SMEs hold are classified as 'Technical characteristic', 'Company competency', and 'R&D activity' and analyzed how they influence the sales achieved as a result of R&D. The analysis was based on a two-year statistical survey conducted by the Korean government. In addition, we confirmed the influence of the factors on the sales according to the R&D method(Self-Development vs. Open Innovation), and also observed the influence change in 29 industrial categories. The results of the study are summarized as follows: First, regression analysis shows that twelve factors of SMEs have a significant effect on sales. Specifically, 15 factors included in the analysis, 12 factors excluding 3 factors were found to have significant influence. In the technical characteristic, 'imitation period' and 'product life cycle' of the technology were confirmed. In the company competency, 'R&D led person', 'researcher number', 'intellectual property registration status', 'number of R&D attempts', and 'ratio of success to trial' were confirmed. The R&D activity was found to have a significant impact on all included factors. Second, the influence of factors on the R&D method was confirmed, and the change was confirmed in four factors. In addition, these factors were found that have different effects on sales according to the R&D method. Specifically, 'researcher number', 'number of R&D attempts', 'performance compensation system', and 'R&D investment' were found to have significant moderate effects. In other words, the moderating effect of open innovation was confirmed for four factors. Third, on the industrial classification, it is confirmed that different factors have a significant influence on each industrial classification. At this point, it was confirmed that at least one factor, up to nine factors had a significant effect on the sales according to the industrial classification. Furthermore, different moderate effects have been confirmed in the industrial classification and R&D method. In the moderate effect, up to eight significant moderate effects were confirmed according to the industrial classification. In particular, 'R&D investment' and 'performance compensation system' were confirmed to be the most common moderating effect by each 12 times and 11 times in all industrial classification. This study provides the following suggestions: First, it is necessary for SMEs to determine the R&D method in consideration of the characteristics of the technology to be R&D as well as the enterprise competency and the R&D activity. In addition, there is a need to identify and concentrate on the factors that increase sales in R&D decisions, which are mainly affected by the industry classification to which the company belongs. Second, governments that support SMEs' R&D need to provide guidelines that are fit to their situation. It is necessary to differentiate the support for the company considering various factors such as technology and R&D purpose for their effective budget execution. Finally, based on the results of this study, we urge the need to reconsider the effectiveness of existing SME support policies.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.235-259
• /
• 2014

New product or new technology developments are directly linked to a firm's survival and thus their performance and improvement are gaining attention in the midst of rapidly changing business environment and aggravating competition. However, despite SMEs' significance in the national economy, they are limited in terms of size and resources in possession, so the government provides a variety of supports as a policy. According to a study on the organizational life cycle, a firm's limits and difficulties differ by growth stage, so the supports need to be tailored. Based on the data from 2,575 firms that responded to the "2011 SMEs Technological Statistics," how technological capability level and deviation in the R&D process affect the R&D sales performance was studied. The result of analysis revealed that the technological capability has a positive impact on the R&D sales performance. It was also learned that the relationship between deviation in the technological capability and R&D sales performance was moderated by the government support. For the hypothesis that the government support would have a different moderating effect by growth stage for the impact the technology level has on the R&D sales performance, the empirical analysis showed a different meaningful moderating effect for each growth stage. The theoretical implications of the study are that, instead of a simple relation of dynamics that does not take the growth stages into account, it suggested a more realistic causal relationship model that reflects the complex environment the SMEs are in and that the need for measuring and using the deviation in technological capability as a research variable has been justified. The practical implications are that the government policy for supports can be tailored to a growth stage and that the guidelines have been suggested to effectively use the government funding by encouraging the SMEs in a different growth stage to adapt to the customized policy.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2009

This study has been focused on determining the chemical composition of $^{14}C$ - in terms of both organic and inorganic $^{14}C$ contents - in reactor coolant from 3 different PWR's reactor type. The purpose was to evaluate the characteristic of $^{14}C$ that can serve as a basis for reliable estimation of the environmental release at domestic PWR sites. $^{14}C$ is the most important nuclide in the inventory, since it contributes one of the main dose contributors in future release scenarios. The reason for this is its high mobility in the environment, biological availability and long half-life(5730yr). More recent studies - where a more detailed investigation of organic $^{14}C$ species believed to be formed in the coolant under reducing conditions have been made - show that the organic compounds not only are limited to hydrocarbons and CO. Possible organic compounds formed including formaldehyde, formic acid and acetic acid, etc. Under oxidizing conditions shows the oxidized carbon forms, possibly mainly carbon dioxide and bicarbonate forms. Measurements of organic and inorganic $^{14}C$ in various water systems were also performed. The $^{14}C$ inventory in the reactor water was found to be 3.1 GBq/kg in PWR of which less than 10% was in inorganic form. Generally, the $^{14}C$ activity in the water was divided equally between the gas- and water- phase. Even though organic $^{14}C$ compound shows that dominant species during the reactor operation, But during the releasing of $^{14}C$ from the plant stack, chemical forms of $^{14}C$ shows the different composition due to the operation conditions such as temperature, pH, volume control tank venting and shut down chemistry.