• Journal of Information Science Theory and Practice
• /
• 제3권3호
• /
• pp.45-63
• /
• 2015

The word ‘growth’ represents an increase in actual size, implying a change of state. In science and technology, growth may imply an increase in number of institutions, scientists, or publications, etc. The present study demonstrates the growth of neurology literature for the period 1961-2010. A total of 291,702 records were extracted from the Science Direct Database for fifty years. The Relative Growth Rate (RGR) and Doubling Time (Dt.) of neurology literature have been calculated, supplementing with different growth patterns to check whether neurology literature fits exponential, linear, or logistic models. The results of the study indicate that the growth of literature in neurology does not follow the linear, or logistic growth model. However, it follows closely the exponential growth model. The study concludes that there has been a consistent trend towards increased growth of literature in the field of neurology.

• 한국식품과학회지
• /
• 제36권2호
• /
• pp.349-354
• /
• 2004

수산식품에서 문제가 되는 식중독 균인 V. parahaemolyticus를 대상으로 온도, pH 및 초기균수에 따른 균의 성장 실험 결과를 데이터베이스화하여 이를 바탕으로 균의 성장을 정량적으로 평가할 수 있는 수학적 모델을 개발하였다. $1.0{\times}10^{2},\;1.0{\times}10^{3},\;1.0{\times}10^{4}\;CFU/mL$의 각 초기균수 조건에서 실험치와 예측치의 상관계수는 각각 0.966, 0.979, 0.965으로 나타났다. 또한, 초기균수를 고려하지 않은 모델식은 상관계수가 0.966으로 다음과 같이 나타났다. Polynomial model: $$k=1.10{\cdot}\exp(-0.5(((T-34.14)/9.09)^{2}+((pH-6.59)/4.68)^{2}))$$ 균의 증식 지표치인 최대증식속도상수 k는 온도에 지배적인 영향을 받았으며, pH 및 초기균수에 따른 유의적인 차이는 없었으므로 (P>0.05), k와 온도와의 관계식인 square root model로 나타내었다. Square root model: $${\sqrt{k}\;0.06(T-9.55)[1-\exp(0.07(T-49.98))]$$ V. parahaemolyticus의 경우, square root model에 의한 실험치와 예측치의 상관계수는 0.977로 polynomial model보다 높은 적용성을 나타내었다.

• 한국군사과학기술학회지
• /
• 제5권4호
• /
• pp.67-77
• /
• 2002

This paper introduces the calibration results of the fatigue crack growth models for damage tolerance analysis of the aircraft structures. Generalized Willenborg model and Wheeler model are calibrated with experimental data tested under the load spectrum of a trainer. The retardation factors such as, shut-off ratio in Generalized Willenborg model and shaping exponent in Wheeler model, are evaluated for aluminum alloys AL2024-T3511, AL7050-T7451 and AL7075-T73511. It is shown that the retardation effect of the crack growth rate depends on the yield strength of material and the maximum stress in the load spectrum. Generalized Willenborg model and Wheeler model give satisfactory prediction of crack growth life but the calibration of the experimental parameters with test is required.

• 한국식품과학회지
• /
• 제37권6호
• /
• pp.1012-1017
• /
• 2005

게맛살로부터 분리한 주요 부패세균은 내열성 포자를 형성하는 Bacillus subtilis와 Bacillus licheniformis로 동정되었다. 게맛살의 제조 공정상 가열 처리 과정에서 B. subtilis와 B. Licheniformis 등 내열성 포자를 형성하는 균을 완전히 사멸시키기는 어려우며, 살아남은 포자는 유통과정 중, 적정 온도와 시간이 경과함에 따라, 영향 세포로 발아하여 게맛살의 부패에 영향을 미친다. 이러한 부패세균의 증식에 있어서 초기균수와 온도의 영향을 조사한 결과, 초기균수에 따른 최대증식속도상수(k)와 유도기(LT), 세대시간(GT)은 유의적인 차이가 없었으며, 온도의 영향이 지배적인 것으로 나타났다. 또한 본 실험에서 유도기(LT)와 온도의 관계는 $L(hr)=2.5219e^{-0.2467{\cdot}T}$의 관계가 성립하며, square root model과 polynomial model을 이용, 온도와 초기균수에 대한 최대증식속도상수(k)를 정량화한 정량평가모델을 개발하였으며, 그 식은 다음과 같다. $$Square\;root\;model:\;{\sqrt{k}}=0.0267\;(T-3.5089)$$ $$Polynomial model:\;k=-0.2160+0.0241T-0.01999A_0$$ 온도와 초기균수에 대한 최대증식속도상수(k)의 정량평가모델로부터 특정온도와 초기 균수에서 최대증식속도상수(k)를 계산할 수 있으며, 계산된 최대증식속도상수(k)를 균의 기본 증식 모델인 Gomperz model에 적용하여 균의 성장을 예측할 수 있었다.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.17-23
• /
• 1984

A model analysis of pattern shift in the epitaxial growth of silicon on (111) substrates was performed. The growth rate anisotropy was considered as the most important affecting factor of pattern shift, and for the model establishment the off angle of the substrate and the process temperature were taken as the variables. We derived a theoretical equation of pattern shift by assuming the growth rate anisotropy as the trigonometric sine function of the off angle of the substrate and defining the growth rate anisotropy factor related to the process temperature. The pattern shift ratio calculated by this model had the same tendency with the experimental ones, which, however, were about twice greater than those. It was supposed that this discrepailcy was due to the second order affecting factor such as facetting and step broadening which had been exluded in model establishment.

• 품질경영학회지
• /
• 제44권3호
• /
• pp.565-574
• /
• 2016

Purpose: In this study, A reliability assurance model (or reliability program) is proposed to evaluate the reliability of an armed vehicle. The reliability assurance is performed through the reliability-centered activities in the K-000(armed vehicle) of D-Company Methods: By reflecting the current situations of korea defense industry, a reliability assurance model is built up based on the benchmarking results of world leading companies' best practices in same fields. So The reliability growth model is applied the Crow-AMSAA model Results: This research analysis the K-000(armed vehicle) of D-Company using the DT and OT failure data. and application case study by growth model of armed vehicles Conclusion: This research is result of application case study by growth model of armed vehicles.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권5호
• /
• pp.382-385
• /
• 2000

A mathematical model was developed, based on the time dependent changes of the specific growth rate, for prediction of the typical microbial cell growth in batch cultures. This model could predict both the lag growth phase and the stationary growth phase of batch cultures, and it was tested with the batch growth of Trichoderma reesei and Lactobacillus delbrueckii.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.566-574
• /
• 2021

The process of cavitation involves generation, growth, coalescence, and collapse of small bubbles and is tremendously influenced by bubble-bubble interactions. To understand these interactions, a new cavitation model based on the transport equation is proposed herein. The modified Rayleigh-Plesset equation is analyzed to determine the bubble growth rate by assuming equal-sized spherical bubble clouds. The source term in the transport equation is then derived according to the bubble growth rate with the bubble-bubble interaction. The proposed model is validated by various test simulations, including microscopic bubble cloud evolution as well as macroscopical two- and three-dimensional cavitating flows. Compared with previous models, namely the Kunz and Zwart cavitation models, the newly proposed model does not require adjustable parameters and generally results in better predictions both microscopic and macroscopical cases. This model is more physical.

• 한국시스템다이내믹스연구
• /
• 제10권1호
• /
• pp.5-32
• /
• 2009

This paper revisited the key advances on System Dynamics modeling about traditional macro-economic models and economic growth structures, and then tries to elaborate a new model based on the endogenous growth theory that incorporates new growth factors, relevant to knowledge/technology as well as the Environment, into traditional growth models. Accordingly, the new model augments the acceleration and multiplier loops and the balancing ones representing market clearing mechanism with a simple numerical example. The authors thus provides macroeconomic System Dynamics analysts with a milestone to model macro-economic structures reflecting on traditional and cutting-edge theories on sustainable economic growth and general equilibrium modeling.

• 한국식품과학회지
• /
• 제37권2호
• /
• pp.194-198
• /
• 2005

게맛살의 HACCP system에 있어서 critical control point중의 하나인 L. monocytogenes가 오염된 제품에서 균의 성장변화를 정량적으로 예측할 수 있는 수학적 모델의 개발을 위한 기초 자료를 제공하고자 게맛살 성분조성을 고려한 modified imitation crab(MIC) broth에서 온도와 초기균수에 따른 L. monocytogenes의 성장 실험 결과를 데이터베이스화하여 이를 바탕으로 균의 성장을 정량적으로 평가할 수 있는 수학적 모델을 개발하였다. 균의 증식 지표인 최대증식속도상수(k), 유도기(LT), 세대시간(GT)은 온도에 지배적인 영향을 받았으며, 초기균수에 따른 유의적인 차이는 없었다(p>0.05). 최대증식속도상수(k)와 온도 및 초기균수의 상관관계를 나타내는 수학적 정량평가모델인 polynomial model과 square root model을 이용하여 L. monocytogenes 성장을 정량적으로 예측할 수 있는 모델인 $polynomial\;mode(k=0.71{\cdot}exp(-0.5(\;((T-36.05)/11.84)^{2}+((A_{0}+8.12)/21.59)^{2})))$과 square root model($\sqrt{k}$ =0.02(T-(-3.42)) [1-exp(0.36(T-44.51))])을 개발하였으며 실험치와 예측치의 상관관계는 각각 0.92. 0.95로 polynomial model보다 square root model 예측치가 실험치와 상관관계가 더 높은 것으로 나타났다.