• 제목/요약/키워드: Technology Transfer

검색결과 6,740건 처리시간 0.04초

자동화된 다기능 통합 전동 침대 개발에 대한 연구 (Research on the Development of Automated Multifunction-Integrated Motion Bed)

  • 이영대;최문수;장일환;김창영;최동수;김민성;김원준;김동환
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권5호
    • /
    • pp.215-222
    • /
    • 2018
  • 최근 다양한 전동 침대의 개발과 보급이 활발하게 이루어지고 있다. 전동침대는 높이조절, 등판상승, 무릅상승, 틸트기능 및 좌우회전의 기능을 가지고 있으며 리모콘을 통해 편리하게 환자가 스스로 또는 보호자가 환자를 움직일 수 있다. 그러나 이미 나와 있는 의료용 전동침대에는 욕창방지, 시트교환, 환자의 이송기능이 없으므로 욕창 방지를 위해서는 욕창 방지 매트릭스를 사용하여 체압을 분산하고, 시트 교환이나 환자의 이송시에는 간병 인력이 붙어 일을 하게 된다. 하지만 이러한 일은 근력과 중노동을 수반함으로서 간호사들이 힘든 간호를 기피하는 현상이 발생하고 있다. 본 연구에서는 이러한 간호 업무를 수월하게 보조하기 위해 욕창방지, 시트교환 및 환자이송을 자동으로 행하는 다기능 병상을 개발하는 것을 목표로 하여 세계 최초의 시제품을 개발하고 시스템이 정상적으로 동작하는 것을 확인하였다. 앞으로 제안된 자동화된 다기능 전동 침상은 스마트 헬쓰케어를 위한 의료용 로봇의 한 모델이 될 수 있을 것으로 기대 된다.

IEEE 802.11a 무선랜용 중간전력 SPDT 초고주차단일집적회로 스위치 제작 및 특성 (A Medium Power Single-Pole-Double-Throw MMIC Switch for IEEE 802.11a WLAN Applications)

  • 문재경;김해천;박종욱
    • 한국통신학회논문지
    • /
    • 제30권10A호
    • /
    • pp.965-970
    • /
    • 2005
  • 본 연구에서는 IEEE 802.11a 표준 무선랜 단말기에 활용 가능한 SPDT Tx/Rx 스위치 MMICs를 설계 및 제작하였다. 이를 위하여 먼저 핵심이 되는 pHEMT 스위치 소자의 에피구조를 설계하였으며, 한국전자통신연구원(ETRI의 $0.5{\mu}m$ pHEMT 스위치 공정을 이용하였다. 제작된 SPDT형 Tx/Rx 스위치 MMIC는 주파수 5.8 GHz, 동작전압 0/-3V에서 삽입손실 0.68 dB, 격리도 35.64 dB, 그리고 반사손실 13.4dB의 특성을 보였으며, 전력전송능력인 P1dB는 약 25dBm, 그리고 선헝성의 척도인 IIP3는 42 dBm 이상으로 평가되었다. 제작된 스위치 회로의 성능은 상용제품과 비교 분석한 결과 반사손실은 약간 부족하였으나 삽입손실은 비슷한 수준이며, 특히 격리도는 동작전압 ${\pm}$ 3V/0Vv, 주파수 5.8GHz에서 약 8 dB 이상 우수하였다. 이와 같은 여러 가지의 스위치 회로의 성능은 본연구에서 개발된 pHEMT SPDT 스위치는 IEEE802.11a 표준 5GHz 대역 무선랜에 충분히 할용할수 있을 것으로 생각된다.

한 대학병원의 수술실 이용 지연요인과 개선방안에 관한 연구 (Delayed use of Operating Rooms in a University Hospital)

  • 김경애;유승흠;김인숙;손태용;박은철
    • 한국병원경영학회지
    • /
    • 제7권3호
    • /
    • pp.44-62
    • /
    • 2002
  • Advanced surgical technology demands more precise, meticulous, and time-consuming procedures. In addition, the patient's preference of tertiary health providers makes over crowding of the University Hospitals. Therefore, it has been necessary to maximize utilization of the operating room of such hospitals to accommodate these requirements. This study, targeting 1,302 surgical cases performed in 22 operating rooms at a university hospital in Seoul from October 8 to November 1, 2001, analyzed reasons for delay, and factors that caused delayed use of operating rooms. This study also assessed that the rate of operating room use would increase if the sources for possible reform were improved. 1. Among total of 1,302 cases of surgery, the incidence of surgeries in which there were no time delays and no factors for delay were discovered is 71.4% or 930 cases: the incidence in which surgeries were delayed was 28.6% or 372 cases. 2. As results of logistic regression for delay, procedures involving women were delayed 1.4 times more frequently than those of men. Compared to Department A, Department B was 1.8 times more likely to be delayed, and Department H was 0.4 times less likely to be delayed. Regional anesthesia was 2.4 times more likely to be delayed than general anesthesia, and surgeries that PCA was applied were 0.6 times less likely to be delayed than those when it was not. Surgeries performed on the Thursday were 1.7 times more likely to be delayed than those performed on the Monday. Compared to surgeries performed between 07:00-07:59, those performed between 08:00-08:29 were 4.3 times higher. 3. The reasons for delay were related to surgeon, surgical department, patient, anesthesia, administrative system, sick ward, and support services. Among these, 5,755 minutes for 276 delayed cases could be resolved easily, and resolving delays of 3,320 minutes for 131 cases would be more difficult. Among the causes for delay that could be improved, delays due to patient's transfer and surgeon's factor were the most common, 21.6% and 17.4% respectively. 4. If resolvable delays are improved, pre-anesthesia room is administered, and regional anesthesia and PCA are done ahead of time, use of emergency operating rooms will increase, we can increase overall utilization by 4.09%, we will save 744 minutes a day, we can reduce the time the operation room is used after 4 PM by 35%, and we can resolve the operation cancellations due to insufficient operating rooms. For the increase in the use of operating rooms, we need to maximally decrease the delays that could be improved, by allocating block time based on used totals hours of elective cases, giving accurate information on surgery schedule, voluntary cooperation by staff participating in surgeries in reducing delay time, and the hospital management's will to improve delay.

  • PDF

전해액 첨가제가 흑연 음극의 저온특성에 미치는 영향 (The Roles of Electrolyte Additives on Low-temperature Performances of Graphite Negative Electrode)

  • 박상진;류지헌;오승모
    • 전기화학회지
    • /
    • 제15권1호
    • /
    • pp.19-26
    • /
    • 2012
  • 표준 전해액에 2중량%의 VC(vinylene carbonate)와 FEC(fluoroethylene carbonate)를 각각 첨가한 전해액으로부터 흑연 음극 표면에 SEI(solid electrolyte interphase) 층을 형성시키고, SEI 특성에 따른 흑연 음극의 저온($-30^{\circ}C$) 충방전 특성을 조사하였다. 흑연의 충 방전 용량은 FEC를 첨가한 전해액, 표준 전해액, 그리고 VC를 첨가한 전해액의 순서로 감소하였고, 충 방시 발생하는 과전압은 반대경향을 보이며 증가하였다. 이는 첨가제의 종류에 따라 생성된 SEI 층의 저항과 전하전달저항에 차이가 있음을 설명하는데, 이를 SEI 층의 화학 조성과 두께를 비교하여 확인하였다. 표준 전해액으로부터 생성된 SEI 층은 C-O 성분을 포함하는 고분자 형태의 화합물과 리튬 염의 환원분해로 생성된 $Li_xPF_yO_z$ 등으로 구성되었다. VC를 포함한 전해액으로부터 생성된 SEI 층은 C-O 화합물 비율이 높고 조밀하여 리튬 염의 분해가 억제되어 얇은 피막이 생성됨에도 불구하고 가장 큰 저항 값을 보였다. 반면에 FEC로부터 생성된 SEI 층은 C-O 성분의 비율이 VC를 첨가한 전해액의 경우보다는 작으면서도 리튬 염의 분해가 크지 않아서, 리튬 이온의 이동이 가장 용이한 피막을 형성하고 있어 가장 낮은 피막저항 및 전하전달 저항을 나타내었다. 결론적으로 FEC를 첨가제로 사용한 경우 생성된 SEI 층의 저항이 가장 작아서 흑연 음극의 저온특성이 가장 우수하였다.

Triclinic Na3.12Co2.44(P2O7)2 as a High Redox Potential Cathode Material for Na-Ion Batteries

  • Ha, Kwang-Ho;Kwon, Mi-Sook;Lee, Kyu Tae
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권2호
    • /
    • pp.187-194
    • /
    • 2020
  • Two types of sodium cobalt pyrophosphates, triclinic Na3.12Co2.44(P2O7)2 and orthorhombic Na2CoP2O7, are compared as high-voltage cathode materials for Na-ion batteries. Na2CoP2O7 shows no electrochemical activity, delivering negligible capacity. In contrast, Na3.12Co2.44(P2O7)2 exhibits good electrochemical performance, such as high redox potential at ca. 4.3 V (vs. Na/Na+) and stable capacity retention over 50 cycles, although Na3.12Co2.44(P2O7)2 delivered approximately 40 mA h g-1. This is attributed to the fact that Na2CoP2O7 (~3.1 Å) has smaller diffusion channel size than Na3.12Co2.44(P2O7)2 (~4.2 Å). Moreover, the electrochemical performance of Na3.12Co2.44(P2O7)2 is examined using Na cells and Li cells. The overpotential of Na cells is smaller than that of Li cells. This is due to the fact that Na3.12Co2.44(P2O7)2 has a smaller charge transfer resistance and higher diffusivity for Na+ ions than Li+ ions. This implies that the large channel size of Na3.12Co2.44(P2O7)2 is more appropriate for Na+ ions than Li+ ions. Therefore, Na3.12Co2.44(P2O7)2 is considered a promising high-voltage cathode material for Na-ion batteries, if new electrolytes, which are stable above 4.5 V vs. Na/Na+, are introduced.

국제환경법상 우리나라의 법적 지위 - 선진국과 개도국의 구분을 중심으로 - (Legal Status of Korea in International Environmental Law - Mainly focused on the Classification of Developed and Developing Countries -)

  • 서원상
    • 환경정책연구
    • /
    • 제6권4호
    • /
    • pp.1-28
    • /
    • 2007
  • 한 국가의 환경오염이 정치적 경계선에 불과한 국경에 한정되지 않고 인접국 또는 지구의 환경에 직 간접적인 영향을 미치기 때문에, 역으로 지구환경보호에 관한 국제적 논의결과는 곧바로 국내 환경법과 환경정책에 영향을 미치게 된다. 국제환경법은 '차별적 공동책임'이라는 원칙하에 선진국과 개발도상국 간의 차별적인 의무체계를 형성하고 있다. 차별적 공동책임은 모든 국가에게 공동의 환경보호책임을 확인하면서도 지구환경문제에 대한 선진국과 개발도상국 간의 역사적 책임의 차이와 환경문제를 다룰 수 있는 경제적 기술적 능력의 차이를 인정하여 국제의무를 차별화한다는 것이다. 그 예로써 선진국의 개발도상국에 대한 환경기술이전과 재정 지원 등이 논의되어 왔다. 문제는 우리나라의 지위이다. 선진국과 개발도상국의 지위에 따른 국제환경의무의 차이만큼이나 우리나라의 국제적 환경정책 또한 달라질 것이기 때문이다. 그 어느 국제법도 선진국과 개발도상국의 구분 기준을 명확히 확립하지 못하였다. WTO는 개발도상국 지위결정을 자기선택에 맡기고 있으며, 국제환경법에서는 협상능력에 따라 그 지위가 좌우되곤 한다. 결국 일반국제법 차원에서 우리나라의 지위가 고정될 수 없으며 정부는 선진국 또는 개발도상국의 지위를 전략적 차원에서 선택할 수 있다. 우리나라가 스스로 개발도상국임을 주장하여 국제의무의 부담을 줄이는 것도 좋은 선택일 수 있겠지만, 각종 경제지표 및 환경오염지표에서 10위권을 유지하고 있는 우리나라의 규모에 비추어볼 때 우리나라의 현실은 선진국에 가깝다고 보여진다. 친환경기술 및 상품의 개발이라는 적극적 정책이 개도국 주장이라는 방어적 정책보다 우선이다.

  • PDF

1급 응급구조사의 임파워먼트와 비판적 사고성향에 관한 연구 (A Study on Empowerment and Critical Thinking of the 1st Emergency Medical Technician)

  • 박대성;김은주
    • 한국응급구조학회지
    • /
    • 제10권3호
    • /
    • pp.5-20
    • /
    • 2006
  • Purpose: This study examines the degree of empowerment recognized by the 1st paramedics and the trend of their critical thinking, analyzes correlations between empowerment and critical thinking to reveal whether there is statistically significant difference between them and then is to provide basic materials necessary for research on empowerment and critical thinking. Method: This study distributes 105 structured self-report questionnaires to the 1st emergency medical technicians working at fire fighting police boxes, general hospitals, clinics and emergency medical information centers in G Metropolitan City and J province from April 29 to May 28, 2006, collects their responses directly and analyzes results with t-test, F-test(ANOVA) and Pearson's Correlation Coefficient. Result: 1. First, average score of empowerment of subjects was 4.68 out of 6 and according to scores by area, capacity 5.98 was highest, followed by significance 5.41, self- determination 4.44 and effectiveness 3.79. 2. degree of empowerment according to general characteristics of subjects showed statistically significant differences in final education(F=2.714, p= .049), level of salary (F=3.298, p= .014) and satisfaction of current job (F=5.399, p= .001). 3. average score of critical thinking of subjects was 3.28 out of 7 and according to areas, no bias 3.95 was highest, followed by maturity 3.68, structure 3.35, inquisitiveness 3.11, pursuit of truth 3.07, critical thinking and self-confidence 3.00, analyticity 2.98. 4. degree of critical thinking by general characteristics of subjects showed statistically significant differences in age(F=2.577, p= .041), final education (F=7.877, p= .000), current workplace (F=3.513, p= .018), level of salary(F=4.628, p= .002), satisfaction with current job(F=6.879, p= .000) and intention to transfer current job(t=15.21, p=.000). 5. as a result of correlations between empowerment and critical thinking of subjects, Pearson correlation coefficients between whole empowerment and critical thinking were r= .21, p=.013. Conclusion: It is considered that the 1st paramedic managers must seek how to keep and manage empowerment and development of education and training program which can enhance critical thinking is needed. Further, emergency educators must develop educational program based on the concept of empowerment to establish early awareness of a desirable organization culture and increase understanding of empowerment in the process of education.

  • PDF

소프트웨어 품질이 소비자 구매 행동에 미치는 영향 (The Effect of the on the purchase behavior of the Software Quality)

  • 김대성;오성배
    • 벤처창업연구
    • /
    • 제4권1호
    • /
    • pp.29-65
    • /
    • 2009
  • 소프트웨어 품질 속성에 대해서는 논란이 많지만, 로버트 L. 글래스가 정리한 바에 따르면 그것은 이식성(portability), 신뢰성(reliability), 효율성(efficiency), 사용성(usability), 테스트 용이성(testability), 이해 용이성(understandability), 수정 용이성(modifiability) 등으로 구성된다. 소프트웨어 품질을 제대로 관리하기 위해서는, 프로젝트를 착수하는 시점에서 요구되는 프로젝트의 품질 속성을 명확히 정의하고 품질 목표를 세워야 한다. 본 연구에서는 소프트웨어 품질이 소비자 구매 행동에 미치는 영향에 대해 고찰을 통해 소프트웨어 산업의 현황과 국가적 위상을 살펴보고, 소프트웨어 품질의 구성요소 및 평가항목을 인식하고, 소프트웨어 품질과 구매 행동과의 관계를 통해 소프트웨어 품질 구성 요인별 소비자 충동구매와 재 구매에 대한 상관관계를 검증하여 소프트웨어 품질 시스템을 강화하여 소프트웨어 제품의 글로벌 경쟁력을 강화하는데 활용되는 연구가 되는데 그 목적을 두고자 한다.

  • PDF

고온을 받는 유황저장탱크의 열팽창에 의한 앵커볼트 영향에 관한 연구 (Study on Effect of Anchor Bolt by Thermal Expansion of Sulfur Storage Tank under High Temperature)

  • 정욱환;김정수;김태민;김문겸
    • 한국전산구조공학회논문집
    • /
    • 제29권5호
    • /
    • pp.483-490
    • /
    • 2016
  • 플랜트의 유황 저장 탱크는 강재로 구성되며, 탱크 저면은 앵커볼트에 의해 Ring Wall 형상의 콘크리트 기초와 연결된다. 탱크 내 유황이 내부 열원에 의해 고온상태를 유지하기 때문에, 유황 저장 탱크는 상온의 유체를 저장하는 다른 탱크에 비해 큰 체적팽창을 겪게 된다. 일반적으로 탱크 기초의 구조설계는 기초의 내외부의 온도차를 하중으로 적용한 구조해석이 수행되는데, 이 방법은 탱크의 열팽창 특성이 앵커볼트에 의해 집중하중 형태로 콘크리트 기초에 전달되는 현상을 고려할 수 없다. 이는 온도하중의 영향을 과소평가하게 되며, 앵커볼트에 인접한 콘크리트의 균열을 야기한다. 본 연구는 앵커볼트에 의한 온도 하중전달 메커니즘을 고려한 하중 평가식을 제안함으로써, 콘크리트 기초에 작용하는 하중을 보다 합리적으로 결정하고자 한다. 이를 위해 탱크 바닥판과 앵커볼트가 포함된 유한요소모델을 이용해 앵커볼트 개수 증감에 따른 온도하중의 변화를 분석하였으며, 분석결과를 이론해와 결합해 앵커볼트에 의해 전달되는 하중을 평가할 수 있는 명시적인 형태로 해를 제시하였다. 제안된 식의 유효성을 확인하기 위해 실제 플랜트 현장의 유황 저장 탱크 설계에 적용하였으며, 실무적으로 사용 가능함을 보였다.

기울어진 비구면 프레넬 렌즈와 C-8 type 전구를 이용한 해상용 랜턴의 배광곡선 시뮬레이션을 통한 성능평가 (Performance evaluation by simulation for the angular luminous intensity distributions of marine lanterns using a tilting aspherical Fresnel lens and a C-8 type light bulb)

  • 조현석;조재흥;박승남;박철웅;김용완;김종태
    • 한국광학회지
    • /
    • 제15권6호
    • /
    • pp.511-518
    • /
    • 2004
  • 대구경이 가능하며 가벼운 프레넬 렌즈로 10 해리 (18.53 km)까지 빛을 비출 수 있는 해상용 랜턴을 설계하고 배광곡선을 시뮬레이션하였다. 렌즈설계 프로그램으로 직경 250 mm와 300 mm인 프레넬 렌즈를 설계하였으며, 이 프레넬 렌즈의 groove 변수들을 최적화하였다. 해상용 랜턴에서 사용하는 전구의 배광곡선을 고려하여 이 프레넬 렌즈의 배광곡선을 조명설계 프로그램으로 계산하였다. 이 결과 전구를 최적의 위치로 정렬하였을 때 이 해상용 랜턴들의 최대광도는 각각 KS 규격인 720 cd를 훨씬 넘는 1000 cd(직경 250 mm의 해상용 랜턴의 경우)와 1300 cd (직경 300 mm의 해상용 랜턴의 경우)로 계산되었다. 그리고 전구의 정렬오차를 정하기 위하여 렌즈의 초점거리에서 벗어난 정도에 따라 배광곡선이 변하는 정도도 알아보았다.