• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.50-57
• /
• 2017

Recently, safety-critical aviation system development programs promoted domestically have been terminated in the middle stage or they have not been put to practical use at the final stage. The program failure may be caused by various factors, but this study focused on imperfect test and evaluation(T&E) procedures. In general, T&E process of a safety-critical system must be distributed throughout the entire life-cycle of the system, have a continuity in phases, and can be implemented in a variety of ways depending on the maturity of the system development and acquisition strategy. This paper aims to present a new strategy by analyzing the domestic and overseas T&E processes to reduce the risk of domestic safety-critical CNS/ATM system development program and increase the success rate of program. First, we discuss the verification and validation techniques for safety-critical systems, analyze the T&E procedures of advanced institutes and the domestic situation, and then compare the domestic and overseas T&E processes to complement the imperfect testing procedure.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.15-20
• /
• 2016

In this paper, we developed the hardware GPS signal generator for generating a GPS L1 meaconing signal with Live GPS signal signals and analyzed the performance of meaconing signal generator thorough the experiment. Deception of the signal, such as a re-broadcast, it is an object of the user to provide false information so as not to receive location information and accurate time. The signal just rebroadcast has the features that can be easily deceive the receiver via a delay of no received signal to the signal processing through an antenna. In this paper, the hardware for generating a signal only these rebroadcast designed and manufactured, by re-sending the received Live GPS signals, to confirm the effect of the receiver. The maximum delay time is possible up to about 2.6msec, also, has been successfully tested to be moved to the position of re-broadcasting based on maturity antenna the position of the receiver through a spaced antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12B
• /
• pp.1099-1111
• /
• 2006

As W-CDMA R5(HSDPA) service became recently commercialized in Korea, there is increasing demand for new pricing methodology for the 3G mobile interconnection at the earliest possible time. However, it is hard to find any case of systematic study on it. In this paper, a synthetic investigation into the three aspects of new mobile telecommunication service - technology, market, and regulation - is conducted to verify the validity of new interconnection pricing methodology. As the findings of this research indicate, given the several technological limits of 3G, speed of mobile telecommunication industry evolution, the problem of verifying ex-ante regulations' validity, and the cases of some foreign countries, it is suggested that immediate revision of interconnection policy is not sensible and that the revision is more desirable to be postponed until the maturity of the 3G market or the adoption of All-IP network.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.16-23
• /
• 2012

Recently, as organizational systems have become larger and more complicated, the evaluation for their efficiency and effectiveness has become more difficult but important. It is essential to understand the current strength and weakness of the organizational process. It can be a starting point for improving the efficiency and effectiveness of the organizational systems, because the quality of system outputs depend greatly on the capability of system process. Particularly in such process-based industries as semiconductor, energy or software industries, an assessment of process capability is more highlighted to gain knowledge of the expected quality and reliability of system outputs. As a result, much attention has been given to the issues of process capability assessment in the process-based industries. However, most of the previous research in those industries is based on case studies, a more generalized method for process capability assessment is in need for help more companies improve their processes. Therefore, this study aims to propose a process capability assessment method and apply the proposed method to an energy company. This research argues that the process capability is composed of individual and organizational capabilities of the process. Then, the concept of Capability Maturity Model Integration, which was initially suggested to evaluate the software development process, was introduced to develop the assessment tools and process. Finally, the proposed method was applied to a Korean company in the energy industry sector to verify its utility. The research outputs are expected to help more firms assess their process capability and ultimately improve the process.

• Journal of Information Technology Applications and Management
• /
• v.16 no.4
• /
• pp.205-222
• /
• 2009

Considering time-lag in the performance evaluation of information system (IS) investment is important because its effect reveals after certain period of time passed. Particularly it is more in the systems of e-government informatization projects which the amount of investment and the scale of business are huge. Many methods to solve this issue have been proposed such as system dynamics methods, simulations, structural equations etc. However, it is still difficult and unsolved problem because collecting practical data for time-lag analysis is very hard. In this paper, we analyze IS time-lag effect through factor analysis using the accumulated practical operational DB data. For the performance evaluation of the G4C system, the representative e-government web portal, we selected eleven factors reflecting time passing in G4C DB data. With these factors this paper conduct time-lag analysis in four view points. First, we conducted 'Stabilizing of G4C system' and got a result that IS is needed about three years for the stabilization. Second, we conducted 'Utilization of G4C system' and got a result that the utilization reaches appropriate level after in three years later after the introduction of G4C system. Third, we conducted 'Cost reduction effect' and got a result that cost reduction is stable in the third year after the introduction of G4C system. Lastly, we conducted 'System maturity effect' and got a result that the system reaches to the quality level that users expect after third to fourth years. According to the results of this research, we found that performance of IS improv continuously not immediately, and it needs three or four years of time-lag.

• Korean Journal of Ichthyology
• /
• v.23 no.4
• /
• pp.300-304
• /
• 2011

The reproductive characteristics of Chaenogobius gulosus was examined using 333 specimens collected monthly between October 2008 and September 2009 in the coastal waters of Tongyoung, Korea. Specimens ranged from 2.0 to 12.6 cm in standard length (SL). The gonadosomatic index (GSI) of females was highest in February and decreased until April, with the spawning season lasting from December to April. The monthly ratio of female to male did not significantly differ (${\chi}^2$-test, p>0.05). The size at 50% maturity for females was 7.9 cm SL. Fecundity ranged from 1,112 to 6,059 eggs, with a mean of 3,011 eggs.

• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.205-211
• /
• 2020

The method of predicting the future may be predicted by technical characteristics or technical performance. Therefore, technology prediction is used in the field of strategic research that can produce economic and social benefits. In this study, we predicted the future market through the study of how to predict the future with these technical characteristics. The future prediction method was studied through the prediction of the time when the market occupied according to the demand of special product. For forecasting market demand, we proposed the future forecasting model through comparison of representative quantitative analysis methods such as CAGR model, BASS model, Logistic model and Gompertz Growth Curve. This study combines Rogers' theory of innovation diffusion to predict when products will spread to the market. As a result of the research, we developed a methodology to predict when a particular product will mature in the future market through the spread of various factors for the special product to occupy the market. However, there are limitations in reducing errors in expert judgment to predict the market.

• Fisheries and Aquatic Sciences
• /
• v.11 no.2
• /
• pp.98-102
• /
• 2008

Relationships between total length (TL) and fecundity, body weight and fecundity, ovary length and fecundity, and ovary weight and fecundity of hilsa shad, Tenualosa ilisha Hamilton, collected from Kuakata, Patuakhali, Bangladesh, were studied. During the sampling period, the fecundity of hilsa was found to range from 169,000 (fish TL=28.0cm, weight=250g) to 1,088,000 (fish TL=40.5cm, weight=955g) with a mean of $520{\pm}53{\times}1,000$. The number of eggs per gram of ovary for samples collected from the anterior, middle, and posterior regions of the ovary were also recorded, but no significant variation was found among ovary regions at the 5% level of significance. Fecundity increased with fish TL and weight. The regression equations obtained in arithmetic forms of relationships between TL and fecundity (F), body weight (BW) and fecundity, ovary length (OL) and fecundity, and ovary weight (OW) and fecundity were $F=-887,896+40,511{\times}TL(r=0.85)$, $F=67,577+755.44{\times}BW(r=0.85)$, $F=-562,070+87,668{\times}OL(r=0.75)$ and $F=124,815+6,596.7{\times}OW (r=0.84)$, respectively. The relationships between fecundity and TL, body weight, ovary length, and ovary weight were linear, and the 'r' values were highly significant (p<0.01). These results provide valuable data for the restoration of hilsa resources, which are economically important but have shown reduced productivity in nations adjacent to the Bay of Bengal.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.146-156
• /
• 2021

A smart city refers to an intelligent city solving problems arising from the concentration its population using IT technology. Various services such as safety, transportation, environment, education, and medical care are provided in a smart city. Still, the degree of service experienced by the residents is lower compared to the technological maturity. Hence, the service acceptance intention factor needs to be improved. In this study, User Characteristic and Service Characteristic variables were identified separately to improve the awareness and experience of smart services among citizens of the smart city and analyze the intention of easy service acceptance. Based on the results, the present study is expected to improve citizen's quality of life and form a happy society. This improvement in citizens and society is achieved by drawing active participation from citizens and investments from the government and private enterprise through solving various problems in the city.

• Journal of Convergence for Information Technology
• /
• v.11 no.11
• /
• pp.195-203
• /
• 2021

This is descriptive research aimed at determining the relations with appearance satisfaction and self-efficacy in controlling job-seeking stress and at providing basic data necessary to decide on an education direction for better career maturity and explore psychological resources. For data collection, convenience sampling was performed among dental hygiene students consenting to participate in the research in Chungcheong and Jeolla Provinces to complete a self-administered questionnaire from November 25 to December 13, 2019. Appearance satisfaction was positively correlated with self-efficacy and was negatively correlated with job-seeking stress; self-efficacy was negatively correlated with job-seeking stress. The factors affecting job-seeking stress were self-efficacy, appearance satisfaction, and major satisfaction. It would be necessary to develop a practical counseling program targeting the combination of positive appearance acceptance and improvement in self-efficacy on the basis of correct aesthetic values with the objective of reinforcing job-seeking competence intensively among dental hygiene majors.