• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.587-594
• /
• 2023

This study investigates the impacts of nuclear energy consumption on environmental quality from a different perspective by focusing on carbon dioxide (CO2) emissions, ecological footprint, and load capacity factor. In this context, the South Korea case, which is a leading country producing and consuming nuclear energy, is investigated by considering also economic growth, and the 1997 Asian crisis from 1977 to 2018. To this end, the study employs the autoregressive distributed lag (ARDL) approach. Different from previous literature, this study proposes a load capacity curve (LCC) and tests the LCC and environmental Kuznets curve (EKC) hypotheses simultaneously. The analysis results reveal that (i) the LCC and EKC hypotheses are valid in South Korea; (ii) nuclear energy has an improving effect on the environmental quality; (iii) renewable energy does not have a significant long-term impact on the environment; (iv) the 1997 Asian crisis had an increasing effect on the load capacity factor; (v) South Korea has not yet reached the turning point, identified as $55,411, where per capita income improves environmental quality. Overall, the results show the validity of the LCC and EKC hypotheses and prove the positive contribution of nuclear energy to South Korea's green development strategies.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.64-68
• /
• 2005

In recent years, there has been a growth of the manufacture and application of magnesium products because of its small specific gravity as well as its relatively high strength. However, there are so many studies to assure good formability because magnesium sheet alloy is difficult to form. In this study, uniaxial tensile and biaxial tensile test of AZ31 magnesium sheet alloy with thickness of 1.2mm were performed at room temperature. Uniaxial tensile test were performed until $7\%$ of engineering strain. R-values and stress-strain curve were obtained. Biaxial tensile tests with cruciform specimen were performed until the breakdown of the specimen occurs. The yield loci are made by application of plastic work theory. The results are compared with the theoretical predictions based on the Hill and Logan-Hosford model. However, next study will be performed at warm-temperature because the specimens are broken under the $0.5\%$ of equivalent strain at biaxial tensile test.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.1-6
• /
• 2020

In this research, 50 nm thick AlN thin films were deposited on the patterned sapphire (0001) substrate by using HVPE (Hydride Vapor Phase Epitaxy) system and then epitaxial layer structure was grown by MOCVD (metal organic chemical vapor deposition). The surface morphology of the AlN buffer layer film was observed by SEM (scanning electron microscopy) and AFM (atomic force microscope), and then the crystal structure of GaN films of the epitaxial layer structure was investigated by HR-XRC (high resolution X-ray rocking curve). The XRD peak intensity of GaN thin film of epitaxial layer structure deposited on AlN buffer layer film and sapphire substrate was rather higher in case of that on PSS than normal sapphire substrate. In AFM surface image, the epitaxial layer structure formed on AlN buffer layer showed rather low pit density and less defect density. In the optical output power, the epitaxial layer structure formed on AlN buffer layer showed very high intensity compared to that of the epitaxial layer structure without AlN thin film.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.55-58
• /
• 1999

Plant water status during growth is directly and indirectly associated with seed yield. The objective of the present study was to determine the genotypic differences in leaf water characteristics at an early growth stage of soybean [Glycine max (L.) Merrill] plants through the pressure-bomb technique. Measurements of water potential as well as relative water content (RWC) were made at the third leaf from the fully-expanded top leaf of eight different soybean genotypes grown for 31 to 35 days after field emergence. On the basis of the modified exponential model, pressure-volume (PV) curves were fitted well ($R^2$=0.92＊＊ to 0.99＊＊ for the curvi-linear region and R=0.67＊＊ to 0.96＊＊ for the linear region), indicating that a segmented model using PROC NLIN of SAS could be used effectively to estimate the leaf water characteristics. The regression analysis for the pressure-volume (PV) curve revealed genotypic variation in the solute potential at saturation (Ψ$_{s,sat}$ :-10.7 to -14.8 bar), solute potential at incipient plasmolysis (Ψ$_{s,ip}$ : -14.3 to -18.3 bar), RWC at incipient plasmolysis (RW $C_{ip}$ : 83.3 to 91.7%), high integrated turgor pressure from saturation to plasmolysis ( $_1$$^{b}$ : 0.39 to 0.81), and maximum volumetric modulus of elasticity ($\varepsilon$$_{max}$ : 150 to 445 bar).).

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.436-446
• /
• 2015

It is suggested investigating method about the existing state of demand in this study. The total demand of 357 water amenity zones in 2014 is estimated based on the growth curve models. The effects of population density and distances between water amenity zones and metropolises populated over 1 million are investigated on each river system. The suitability like RMSE and MAPE of logistic and gompertz models are considered to select more suitable model for each water amenity zone. Demand for water amenity zones in 2014 is seemed to be rather high at Han Gang river system and Chungcheongbukdo after analyzing. The influence of population density is rarely effective except Geum Gang river system. The influence of metropolis on the demand for water amenity zones is higher at Geum Gang river system than others.

• Natural Product Sciences
• /
• v.25 no.1
• /
• pp.38-43
• /
• 2019

Microbial wound infection prolonged the hospitalization and increase the cost for wound management. Silver is commonly used as antimicrobial wound dressing. However, it causes several adverse side effects. Hence, this study was aimed to evaluate the antimicrobial efficiency of Swietenia macrophylla seed extract on clinical wound pathogens. Besides, the bioactive constituents of the seed extract were also determined. S. macrophylla seeds were extracted with methanol by maceration method. The seed extract inhibited 5 test bacteria and 1 yeast on disc diffusion assay. The antibacterial activity was broad spectrum, as the extract inhibited both Gram positive and Gram negative bacteria. On kill curve analysis, the antibacterial activity of the seed extract was concentration-dependent, the increase of extract concentration resulted in more reduction of bacterial growth. The extract also caused 99.9% growth reduction of Bacillus subtilis relative to control. A total of 21 compounds were detected in gas chromatography- mass spectrometry analysis. The predominant compounds present in the extract were oleic acid (18.56%) and linoleic acid (17.72%). In conclusion, the methanolic extract of S. macrophylla seeds exhibited significant antimicrobial activity on clinical wound pathogens. Further investigations should be conducted to purify other bioactive compounds from the seeds of S. macrophylla.

• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1321-1329
• /
• 2007

Deer antler tissue contains the most rapidly growing bone in the animal kingdom. Thus, it is likely that growing antler tissue is a rich source of local paracrine bone-stimulating factors. Growth factors, at least the insulin-like growth factor (IGF), control the bone-remodelling process. In this study, we tried to isolate and purify IGF-I from fresh antler tissue by the routine isolation and purification of protein. The purification involved ammonium sulfate precipitation, DEAE-Sepharose CL-60 ion-exchange chromatography, CM-Sepharose CL-6B ion-exchange chromatography, and Sephadex G-50 chromatography. Purified fractions from each step were analyzed by high-performance liquid chromatography (HPLC), SDS polyacrylamide gel electrophoresis (SDS-PACE), Dot-blot, and Western-blot methods. Furthermore, the quantification of partially purified IGF-I was calculated by enzyme-linked immunosorbent assays (ELISA) using antibody to human recombinant IGF-1. SDS-PAGE analysis of the final fraction yielded two molecular bands and the signal band was at 12 kDa on the Western-blot film. This purified IGF-I fraction showed a peak at retention time of eight min. The quantity of IGF-I in 20 g deer antler tissue as starting weight was calculated using a standard curve to be 2910 ng/ml, and total IGF-I amount is 0.291 g. The results show that IGF-I, which can be found in deer antler, can be partially purified and quantified by classic protein isolation methods.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.1
• /
• pp.12-16
• /
• 2004

In this study, we have investigated the development of the crystal growth stability and reproducibility for large and high-quality DAST. DAST crystal were grown from a saturated methanol solution by a slow cooling method and DAST was synthesized by the condensation of 4-methyl-n-methyl pyridinum tosylate, which was prepared from 4-pocoline and methyl toluenesulponate and 4-N-dimethyl amino-bezaldehyde in the presence of piperidine. We had synthesized DAST crystals in dry Argon atmosphere in order to avoid the formation of hydride organge co-crystals, DAST$.$$H_2O$. Since DAST molecules crystallize in a humid atmosphere, crystal structure become centrosymmetric, and then second order NLO (nonlinear optical) properties would be disappeared. We fixed the growth orientation of DAST crystal (001) surface. The crystal growth was proceeded at a cooling rate of $H_2O$/day and the cooling period is for 4 days. The dimensions of seed crystal was $2.5\times 3.6\times0.4\textrm{mm}^3$ and we have obtained a DAST crystal with the dimension of $10\times 10.5\times3.0\textrm{mm}^3$. The color of grown DAST crystal is red and it's surface appears to be metallic green.

• Journal of Ginseng Research
• /
• v.40 no.4
• /
• pp.453-461
• /
• 2016

Background: This study aims to describe the characterization of Paenibacillus polymyxa GBR-1 (GBR-1) with respect to its positive and negative effects on plants. Methods: The morphological characteristics of GBR-1 were identified with microscopy, and subjected to Biolog analysis for identification. Bacterial population and media optimization were determined by a growth curve. The potential for GBR-1 as a growth promoting agent, to have antagonistic activity, and to have hydrolytic activity at different temperatures was assessed. The coinoculation of GBR-1 with other microorganisms and its pathogenicity on various stored plants, including ginseng, were assessed. Results: Colony morphology, endospore-bearing cells, and cell division of GBR-1 were identified by microscopy; identification was performed by utilizing the Biolog system, gas chromatography of fatty acid methyl esters (GC-FAME). GBR-1 showed the strongest antagonistic activity against fungal and bacterial pathogens. GBR-1 cell numbers were relatively higher when the cells were cultured in brain heart infusion (BHI) medium when compared with other media. Furthermore, the starch-hydrolytic activity was influenced by GBR-1 at higher temperature compared to low temperatures. GBR-1 was pathogenic to some of the storage plants. Coinoculation of GBR-1 with other pathogens causes differences in rotting on ginseng roots. A significant growth promotion was observed in tobacco seedlings treated with GBR-1 suspensions under in vitro conditions, suggesting that its volatile organic compounds (VOCs) might play a role in growth promotion. Conclusion: The results of this study indicate that GBR-1 has both positive and negative effects on ginseng root and other stored plants as a potential biocontrol agent and eliciting in vitro growth promotion.

• The Korean Journal of Malacology
• /
• v.23 no.1
• /
• pp.17-23
• /
• 2007

Samples of Potamocorbula ustulata ustulata were collected monthly from October 2004 to November 2005 in the Jujin estuary of Gochang, Chollabuk-do, west coast of Korean peninsula. Age of P. ustulata ustulata was determined by the rings on the shell. The relationship between the shell length and the ring diameter in each ring group was expressed as a regression line. Therefore, there is a correspondence in each ring formation. Based on the monthly variation of the marginal index (MI') of the shell, it is assumed that the ring of this species was formed once a year during October to December. The relationship between the shell length (SL) and the shell height (SH; mm) was highly correlated with shell height as the following equation: SH = 0.6438 SL + 0.5642 ($r^2\;=\;0.978$). The shell length (SL) - shell width (SW) relation was also expressed by the following equation: SW = 0.4352 SL - 0.5675 ($r^2\;=\;0.957$). Shell length (SL; mm) and the total weight (TW; g) followed: $TW\;=\;6.999\;{\times}\;10^{-5}\;SL^{3.2542}(r^2\;=\;0.975)$. Growth curves for the shell length and the total weight fitted to the von Bertalanffy's growth curve were expressed respectively as: $$SL_t=30.77[1-e^{-0.4572(t+0.7371)}],\;TW_t=4.87[1-e^{-0.4572(t+0.7371)}]^{3.2542}.$$