• 한국건설관리학회논문집
• /
• 제5권1호
• /
• pp.62-70
• /
• 2004

도로건설과 같은 공공사업을 수행하기 위해서는 사유재산의 사용이 불가피하게 발생하게 되며, 토지 등의 사유재산을 사용하기 위해서는 적절한 보상이 이루어져야 한다. 이러한 보상업무는 업무절차가 복잡하고 보상대상이 다양하여 업무처리를 위한 전자처리체계 개발이 요구된다. 지방청 용지보상시스템은 도로건설시 보상업무의 기반이 되는 용지도에 지리정보체계(GIS) 기술을 적용, 도면상의 토지위치 정보와 연계하여 보상계획의 수립, 보상현황의 파악, 보상업무의 관리를 할 수 있도록 하였으며, 협의보상, 수용$\cdot$재결 및 공탁 등의 제반업무를 효과적으로 처리할 수 있도록 구현하였다. 향후 본 시스템을 활용하여 토지재산관리체계로 확장$\cdot$발전시켜 운영함으로써 보상결과의 활용성을 제고하고, 국가로 소유권이 이전된 토지에 대한 정확하고 합리적인 관리를 실현할 수 있을 것이다.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.93-99
• /
• 2002

In general, manufacturing error is originated from bad material, machine tool defection and tool breakage. When the manufacturing process is stable, the most of error come from the tool wear. In common on-machine measurement teaching probe and touch sensor are widely used however in this paper the electric touch point type automatic tool compensation system is developed the performance of it is validated and effective operating is proposed.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.127-139
• /
• 2024

This paper discusses a gravity compensation technique designed to reduce wavefront error caused by gravity during the assembly and alignment of satellite multi-band optical sensor. For this study, the wavefront error caused by gravity was analyzed for the opto-mechanical structure of multi-band optical sensor. Wavefront error, an indicator of optical performance, was computed by using the displacements of optics calculated through structural analysis and optical sensitivity calculated through optical analysis. Since the calculated wavefront error caused by gravity exceeded the allocated budget, the gravity compensation technique was required. This compensation technique reduces wavefront error effectively by applying the compensation load to the appropriate position of the housing tube. This method successfully meets the wavefront error budget for all bands. In the future, a gravity compensation equipment applying this technique will be manufactured and used for assembly and alignment of multi-band optical sensor.

• 한국군사과학기술학회지
• /
• 제17권3호
• /
• pp.342-349
• /
• 2014

MRDS is a short range missile/rocket defense system which protects a main battle tank(MBT) from threats in a short range. It is composed of 2 radars, 2 infrared trackers(IRTs), 1 fire control computer(FCC), 2 launchers and countermeasures. To guarantee the performance of the MRDS, these components have to be mounted on the vehicle with the known positions and directions and it is required to compensate the alignment errors. In this paper, a system alignment method using angular error compensation is proposed to install its components within a tolerance on the MBT. The test results are presented to evaluate and verify the effectiveness of the proposed method.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.88-93
• /
• 2017

Due to the requirement of the development of the precision manufacturing industry, the accuracy of machine tools has become a key issue in this field. A critical factor that affects the accuracy of machine tools is the feed system, which is generally driven by a ball screw. Basically, to improve the performance of the feed drive system, which will be thermally extended lengthwise by continuous usage, a thermal error compensation system that is highly dependent on the feedback temperature or positioning data is employed in the machine tool system. Due to the overdependence on measuring technology, the cost of the compensation system and low productivity level are inevitable problems in the machine tool industry. This paper presents a novel feed drive thermal error compensation system method that could compensate for thermal error without positioning or temperature feedback. Regarding this thermal error compensation system, the heat generation of components, principal of compensation, thermal model, mathematic model, and calculation method are discussed. As a result, the test data confirm the correctness of the developed feed drive thermal error compensation system very well.

• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.163-170
• /
• 2016

Tropospheric delay is one of the largest error source in pseudolite navigation system. Because a pseudolite is installed on the ground and transmits its signal to a user in the air or on the ground, the conventional tropospheric delay model developed for a satellite navigation doesn't work properly. In this paper, performance analysis of several pseudolite tropospheric delay models has been done using meteorological data. Based on the result, a new compensation method for Hopfield model has been proposed.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.48-54
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. in this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.100-105
• /
• 2002

In general, manufacturing error originated in bad material, machine tool defection, tool defection, and tool breakage. When the manufacturing process is stable, the error is come from the tool wear. In common on-machine measurement, teaching probe and touch sensor are widely used, however in this thesis the automatic tool compensation system using electric touch point measuring system is developed and evaluated, and effective operating is proposed.

• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.297-301
• /
• 2014

The biggest factors, which lower the machining accuracy of machine, are thermal deformation and chatter vibration. In this article, we introduce the development case of a device and technology that can automatically compensate thermal deformation errors of machine during long-time processing on the machine tool's CNC (Computerized Numerical Controller) in real time. In machine processing, the data acquisition of temperature signal in real time and auto-compensation of the machine origin of machine tools depending on thermal deformation have significant influence on improving the machining accuracy and the rate of operation. Thus, we attempts to introduce the related contents of the development we have made in this article : The development of a device that embedded the acquisition part of temperature data, linear regression to get compensation value, compensation model of neural network and a system that compensates the machine origin of machine tool automatically during manufacturing process on the CNC.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.233-240
• /
• 2019

High-altitude ElectroMagnetic Pulse(HEMP) is a high-power electromagnetic pulse caused by nuclear explosions at altitudes above 30 km. This pulse can cause serious damage to the electrical/electronic device. Therefore, there are a lot of studies on the effects of HEMP in the literature. When conducting studies on the effects of HEMP, it is essential to measure the simulated HEMP. Depending on the need for measurement, this paper focuses on the HEMP measurement method. This paper proposes a measurement method using frequency domain compensation to extract the correct waveform and solves the offset problem more efficiently than the conventional methods. The proposed method is verified by experiment using HEMP simulator and measurement system in ADD.