Browse > Article

Development and Evaluation of Automatic Tool Compensation System  

정상화 (조선대학교 기계공학부)
신현성 (광주기능대학 자동화 시스템과)
차경래 (조선대학교 대학원 기계공학과)
Publication Information
Transactions of the Korean Society of Machine Tool Engineers / v.11, no.5, 2002 , pp. 93-99 More about this Journal
Abstract
In general, manufacturing error is originated from bad material, machine tool defection and tool breakage. When the manufacturing process is stable, the most of error come from the tool wear. In common on-machine measurement teaching probe and touch sensor are widely used however in this paper the electric touch point type automatic tool compensation system is developed the performance of it is validated and effective operating is proposed.
Keywords
Automatic Tool Compensation; On-machine Measurement; Touch Sensor; Height Pre-setter;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 10万回轉高速ミ-リソにおける超硬小經ボ-ルエソドミルの磨耗特性 /
[ 安濟正傳;中川咸雄 ] / 日本精密工學會誌
2 Technical Manual(8-bit Micro controller with 2K Bytes Flash) /
[ ATMEL ] / AT89C2051, Rev. 0368E-02/00.
3 Operator's manual /
[ FANUC LTD. ] / B-54824E/04
4 エソミ加工おける工具逃げ面磨耗監視システム /
[ 松村陸;村山孝傳 ] / 日本精密工學會誌
5 고기능 자율가공 시스템개발 /
[ 과학기술부 ] / 한국기계연구원, UNC568-2078-C
6 머시닝센터용 자동공구보정시스템의 개발 /
[ 정상화;신현성;김현욱 ] / 한국공작기계학회지   과학기술학회마을
7 NC선반가공에서 자동공구보정시스템의 개발 /
[ 주상윤;강병필 ] / 한국정밀공학회지   과학기술학회마을
8 Sentrol-M 취급설명서 /
[ 통일중공업(주) ] / E001-00990-05
9 Technical Manual(No Base Connection Photo transistor Optocoupler) /
[ Infineon Technologies ] / Moc8103, 1-800-777-4363
10 PC-NC 응용가공 기계의 지능화 기술 개발에 관한 연구 /
[ 산업자원부/과학기술부 ] / 최종보고서