Browse > Article
http://dx.doi.org/10.9766/KIMST.2019.22.2.233

A Study on the Measurement Method of Test Waveform for System-level HEMP Immunity Test  

Yeo, Saedong (The 7th Research and Development Institute, Agency for Defense Development)
Publication Information
Journal of the Korea Institute of Military Science and Technology / v.22, no.2, 2019 , pp. 233-240 More about this Journal
Abstract
High-altitude ElectroMagnetic Pulse(HEMP) is a high-power electromagnetic pulse caused by nuclear explosions at altitudes above 30 km. This pulse can cause serious damage to the electrical/electronic device. Therefore, there are a lot of studies on the effects of HEMP in the literature. When conducting studies on the effects of HEMP, it is essential to measure the simulated HEMP. Depending on the need for measurement, this paper focuses on the HEMP measurement method. This paper proposes a measurement method using frequency domain compensation to extract the correct waveform and solves the offset problem more efficiently than the conventional methods. The proposed method is verified by experiment using HEMP simulator and measurement system in ADD.
Keywords
HEMP; Transfer Function; Frequency Domain Compensation; Offset;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 M. Seo, S. Chi, Y. Kim, W. Park, H. Kang and C. Huh, "Electromagnetic Wave Shielding Effectiveness Measurement Method of EMP Protection Facility," The Journal of Korean Institute of Electromagnetic Engineering and Science, Vol. 25, No. 5, pp. 548-558, 2014.   DOI
2 IEC 61000-1-3, "IEC Standard, Electromagnetic Compatibility(EMC), Part 1-3 : General - The Effects of High-altitude EMP(HEMP) on Civil Equipment and Systems," 2002.
3 IEC 61000-2-9, "IEC Standard, Electromagnetic Compatibility(EMC), Part 2-9 : Description of HEMP Environment - Radiated Disturbance," 1996.
4 R. Hoad, W. A. Radasky, “Progress in High-altitude Electromagnetic Pulse(HEMP) Standardization,” IEEE Trans. on Electromagnetic Compatibility, Vol. 55, No. 3, pp. 532-538, Jun. 2013.   DOI
5 MIL-STD-464C, "Electromagnetic Environmental Effects Requirements for Systems," Department of Defense, 2010.
6 MIL-STD-188-125-1, "Department of Defense Interface Standard : High-altitude Electromagnetic Pulse(HEMP) Protection for Ground-based C4I Facilities Performing Critical, Time Urgent Missions, Part 1 - Fixed Facilities," Department of Defense, 1998.
7 MIL-STD-188-125-2, "Department of Defense Interface Standard : High-altitude Electromagnetic Pulse(HEMP) Protection for Ground-based C4I Facilities Performing Critical, Time Urgent Missions, Part 1 - Transportable Systems," Department of Defense, 1998.
8 J. V. Kluss, P. Hyvonen, "Practical E-field Sensors for EMP Testing," in Proc. Int. Conf. High Voltage Eng. Appl.(ICHVE), Sep. 2014.
9 Yaoyao Li, Donglin Su, Yan Liu, Zhao Yang, "The Experimental Study on the Effect of HEMP on the Typical Aircraft Antenna," 7th Asia-Pacific Conference on Environmental Electromagnetics (CEEM), Nov. 2015.
10 Huang Zhengyu Shi Lihua Zhou Yinghui Ma Rupo, "EMD-Based Signal Denoising in EMP Measurement System," IEEE 11th International Conference on Electronic Measurement & Instruments, Aug. 2013.
11 Bertrand Daout, TN27 - Adjustment of the Offset When using the Integration Function on a Scope, Montena Technology, Switzerland.
12 Lijun Yao, Jianling Huang, Ning Kang, Tao Shen, Dong Liu, Feng Zhang and Hongliang Sun, "Compensation of the Offset in Numerical Integration of a D-dot Sensor Measurement," 3rd Asia-Pacific Conference on Antennas and Propagation (APCAP), Harbin, China, July 2014.
13 MIL-STD-461G, "Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment," Department of Defense, 2015
14 S. Lee and Y. Park, 2017, "3 Dimensional Pulse Detector Using SMA Connector," The Journal of Korean Institute of Electromagnetic Engineering and Science, Vol. 28, No. 9, pp. 707-712, 2017.   DOI
15 IEC 61000-4-33 Electromagnetic Compatibility(EMC) - Part 4-33 : Testing and Measurement Techniques - Measurement Methods for High-power Transient Parameters, Sep. 2005.