• 한국광학회:학술대회논문집
• /
• 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.98-98
• /
• 1997

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.228-237
• /
• 1996

On the basis of a brief introduction of the mechanized dry farming in Heilongjiang Province, the author states the developing process from the combination of single technics of farm machinery and agronomy to the technical assembly of high yield cultivation technics and its mathematical expression. According to the main temperature accumulated zones, 5 typical comprehensive technical assembly models for the mechanized cultivation technics and their agricultural machinery systems have been listed. They are, the Heihe " 261" wheat and soybean model : the Yi'an big ridge double row film mulching corn model : the Yongchang high yield mechanized soybean and other grain crops six year rotation model for Keshan state farms. The author conclude that the application of mechanized high yield cultivation technical assembly is the key point to transform the Heilongjiang province from big agriculture to strong agriculture, we have to take " high yield , high quality , high efficiency , s stain -ability and earning foreign currency" as the general target and carry out the corresponding policy and measures for the further development of agricuture.

• 한국안전학회지
• /
• 제8권3호
• /
• pp.91-104
• /
• 1993

This paper is on the current and prospect of the most advanced explosive technics, special explosive technics. Futhermore, utmost needed and utmost centered interesting basic theory, struction explosive demolition is descirbed with counter Plan on the Problems of carrying out example and cuf out of it. Specified description noted on the four pollution especially noisy vibration, dust and disperse pollution with comprehensive counter plan. Although it has some insufficiency. I expect my paper will be to advance the explosive technics.

• 한국광학회지
• /
• 제33권6호
• /
• pp.260-266
• /
• 2022

2개의 결합층과 2개의 격자 층으로 구성된 회절격자 구조를 형성하고, 최적화 기법을 통하여 -1차에서 높은 투과 회절 효율을 가지는 회절격자를 설계하였다. 설계된 회절격자는 설계 중심파장에서 99.997%의 transverse electric wave 회절 효율을 가지고 있었으며, 95% 이상의 회절 효율을 유지하는 파장 폭이 80 nm이고 입사각 폭이 20.0°이었다. 회절격자 공차 분석을 수행하여 95% 이상의 회절 효율을 가지기 위한 두께 공차가 최소 60 nm 이상 확보되어 있고, 내부각도 10° 이내의 사다리꼴 모양에서도 회절 효율을 유지할 수 있음을 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제4권1호
• /
• pp.37-44
• /
• 1981

It is a experimental report to investigate optimum exposure technics in angiocardiography. Because of x-ray absorption and rapid voluntary motion in the heart region, it bound that discrimination ability of the exposed film is being decreased in ACG To circumvent these disadvantage it must be necessary to use short time exposure technics and also high capacity equipment in ACG. But in the case of using the low tube voltage to improve contrast on the exposed film, it will be result in a many difficulties in interpretation of the image due to increased contrast in vertebral images. Therefore the ranges 80 kVp to 90 kVp of could be suitable for the purpose of good contrast and an excellent discrimination ability and under this circumstance the optimum grid ratio for ACG was 8:1 to 12:1.

• 화약ㆍ발파
• /
• 제11권4호
• /
• pp.9-27
• /
• 1993

This paper is on the current and prospect of the most advanced explosive technics, Futhermore, utmost needed and centered interesting basic theory, The demolition is described with counter plan on the problems of carrying out example. Specified description noted on the pollution especially noisy, vibration, dust and disperse pollution with comprehensive counter plan. Although it has some insufficiency, 1 expect my paper will be to advance the explosive technics.

• 대한치과기공학회지
• /
• 제14권1호
• /
• pp.91-94
• /
• 1992

This study was made to change dimension of self-curing resin by various curing technics. Specimens were fabricated 45 by 7 curing method. Six measurements(distances AB,BC,CD, AD, AC, and BD) were made of mold section and recorded with micrometer(1/20 mm). The results of the experiment were as follows : 1. The air pressure cured specimens exhibited more distoration than the bench-cured, watercured, and monomer atmosphere-cured specimens(P < 0.05). 2. The water pressure cured specimens exhibited more distoration sphere-cured specimens (P < 0.(15).

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.288-293
• /
• 2018

The main objective of this study is to investigate the influence of hydraulic retention time (HRT) on biogas production during leachate treatment using an anaerobic reactor type Upflow Anaerobic Sludge Blanket. For this purpose, four HRTs ranging from 12 to 48 h were experienced. The obtained results showed that higher amount of biogas could be produced during longer HRTs. However, HRTs longer than 48 h could not affect clearly the biogas generation and considered as unnecessary given the small additional amount of biogas produced during the degradation process. A volume of $0.434L/L_{leachate}/d$ was achieved during the treatment with a HRT of 48 h. The higher biogas production, the smaller chemical oxygen demand (COD) values achieved. Besides, COD removal and biogas production positively correlate, showing that the active biomass has degraded effectively the organic load to produce biogas. Moreover, all the analyzed physicochemical parameters have experienced a decrease after 48 h except for the pH, which increased to approximately neutral value. More precisely, a decrease of 93.8%, 89.7%, 95%, 70%, 77%, and 84.4% was recorded for COD, electrical conductivity, total suspended solid, turbidity, $NH_4{^+}-N$, and $NO_3{^-}-N$, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.2022-2042
• /
• 2020

This research aims to contribute to the discipline of knowledge management (KM) in Higher Education (HE), and is conducted using the case of the study programme (SP) for Integrated Academic Studies (IAS) of Technics and Informatics (TI). A deduction-induction methodology is applied, using a Plan-Do-Check-Act (PDCA) approach to design a suitable KM concept for making improvements to the SP IAS TI on the standardisation platform. Based on the application of the International Classification of Standards (ICS), the research analyses the correlations and competences acquired during the courses within the accredited TI study programme of two-course studies. On the basis of the results of a comparative analysis of the developmental learning process and educational goals, it is shown that knowledge management in correlation with standardisation leads to the improvement of study programmes in the upcoming accreditation cycle on the standardisation platform. Frequent innovations within standardised thematic fields (daily, weekly, monthly, etc.) indicate the need for appropriate changes to the SP. The contribution to KM is through an original analysis of annual samples of more than 90,000 standardised sources in correlation with the TI study programme. Expert System (ES) modelling and the original results enable an analogous contribution to the future KM of other SPs.

• 한국주조공학회지
• /
• 제15권2호
• /
• pp.113-121
• /
• 1995