• Journal of Information Technology Services
• /
• v.3 no.1
• /
• pp.21-41
• /
• 2004

The technical proposal suggested and published by MIC(Ministry of Information and Communication, henceforth MIC) contains too general assessment elements, which causes qualitative and subjective assessment of technical proposals. Thus, in terms of the technical proposal assessment. It lacks In fairness, validity and accuracy. Furthermore, it has a great deal of difficulty in assessment caused by the inconsistency between proposal planning and assessment methods. Also, each company has different writing format, so it is impossible to make use of its maneuvering data for the assessment. To overcome these weaknesses, our research focused on a quantitative evaluation on development organization, which is a part of organizational and administrative part of the technical proposal suggested and published by MIC. In this research, we divided development organization for the technical proposal into organization, teams, and team members, and then studied addition, deletion and merging for the assessment criteria. For the related study, we chose especially CMM(Capability Maturity Model) from a lot of international and national references, which is a model measuring the maturity of organization, and then we focused on Small-CMM which is available in the small-sized organization. We also suggested input form, description method, assessment elements for the quantitative assessment in the chosen developmental organization, and finally we proposed standard referencing criteria for the assessment. Our study concludes that our assessment method are valid and available in comparison with the previous Delphi method through a validity evaluation test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2B
• /
• pp.203-211
• /
• 2009

In the area of the telecommunication industry, a few products have been developed before related technical regulation has been made. Government agency is forced to make a final decision on whether a requested product is sellable in the market only after the structure and function of requested product is tested. The introduction of a 'SDoC', and 'privatization of technical regulation' to our legal system could be a solution for minimizing the situation mentioned above. Both 'SDoC' and 'privatization of technical regulation' are systems which are capable of minimizing the appearance of products without technical regulations. Furthermore, 'Temporary approval system' would provide a government agency with administrative procedure for new product without technical regulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.122-127
• /
• 2018

In an attempt to estimate the life projection of LED packages, IESNA published a paper regarding an LED package measurement test method in 2008, and a life projection technical document in 2011, to be used for LED life estimation. IESNA's publications regarding LED package measurement methods were functional, but they were not internationally standardized before 2017. In order to develop a standardized method, the International Standard chose to use the LM-80 as a measurement method for LED life projection in their publication in 2017. Many projection methods have been discussed by the IEC Technical Committee 34 working group, including the method using an exponential function, which reflects lumen degradation characteristics well. This study is designed to explore alternative LED package life estimation methods using an exponential function with statistical analysis, other than the one suggested by the International Standard.

• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.249-263
• /
• 2015

Standardization work for the ocean data produced by a variety of national oceanographic research projects was conducted in order to establish a national ocean data sharing system. For this work, we first prepared standard proposals for the national research ocean data by reviewing and analyzing of existing international and domestic ocean-data standards. The proposed standards were reviewed and revised by experts in the field of oceanography and academic societies for documentation. The 125-page technical report on the standards of 25 data items was prepared as an output of this research work, which is available free of charge for the public and interested parties. This paper explains the proposed standards of metadata and codes regarding the common properties of all the oceanographic data items. Especially, the standards for the metadata, codes and data formats of 4 physical data items were described in detail. In order to be adopted as the national standards for ocean data, however, the standards suggested here require further development and/or modification based on additional reviews of and ample feedbacks from the relevant academic and technical communities.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.581-588
• /
• 2015

In this paper, we researched that setting standard for RSC(Radar Cross Section) of naval surface ship could be determined and considered in various ways on ship's survivability, technical building feasibility, operation and so on. This study presented fundamental capacity on anti-ship missile, radar, flight and so no and the procedure to set of target/standards for RSC. The RCS standards is good at setting low as low as to improve survivability aspect, but because we should consider effect, technical limit, cost etc, this paper analyzed necessary elements to set standard than to suggest specific number and suggested procedure to set standars according to suggest the boundary of RCS.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.19-25
• /
• 2000

In Condebelt press drying system, the temperature difference between top and bottom plate of Condebelt transfers water to bottom side, Fine fibers, stickies , ink , and various inorganic materials are also migrated to the fine wire located at the bottom plate by highly pressurized moisture flow. As a result, the fine wire contaminated by plugging of these fine and sticky materials can cause many problems such as blistering or partial crushing of paper. The contaimination of fine wire leads to a deterioroated strength together with uneven physical properties of paper. In this paper, froth-flotatiion method, which is commonly used in the field of ONP recycling process, were adopted to separate the contaminants in KOCC as a new fiber fractionation method. Standard deviation of paper strength and brighteness decreased of Condebelt fine wire were measured to investigate the effect of contaminants removal . The standard deviations of paper strength obtained from the flotated accept were not dependent on the number of condebelt press drying . However, in the case of untreated KOCC, the standard deviations were increased as press drying repeated. This indicates that the contaminant gives uneven physical properties to the paper by wire plugging . Optical and SEM images clearly illustrate the effect of contaminants on the wire condition.

• Tuberculosis and Respiratory Diseases
• /
• v.75 no.4
• /
• pp.135-139
• /
• 2013

Endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) is becoming a standard method for invasive mediastinal staging and for the diagnosis of paratracheal and peribronchial lesions. It is essential to understand the technical aspects of EBUS-TBNA to ensure safe and efficient procedures. In this review, we discuss the practical aspects to be considered during EBUS-TBNA, including anesthesia, manipulation of equipment, understanding mediastinal ultrasound images, target selection, number of aspirations needed per target, sample handling, and complications.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.53
• /
• pp.99-109
• /
• 1999

The International Organization for Standardization(ISO) is a worldwide federation of national standards bodies. Through ISO Technical Committees(TC), various International Standards are being carried out. Each member body interested in a subject for which a TC has been established has the right to be represented on that committee. ISO collaborates closely with the International Electro-technical Commission(IEC) on all matters of electro-technical standardization. ISO established the ISO 9000 Family standard in 1987, and International Standard ISO 9000-3 was worked by ISO/TC 176, Quality management and quality assurance, Subcommittee 2(SC 2), Quality systems, in accordance with the ISO/IEC Directives, Part 3: 1997 Rules for the structure and drafting of International Standards, Many organizations have applied the ISO 9000-3 for their quality system standard in the software sector. That means that ISO 9000-3: 1991 and ISO 9000-3: 1997 have been used successfully by the software industry as the internationally accepted interpretation of ISO 9001 for the development and maintenance of computer software. Additionally ISO 9000-3: 1997 involved how the software life cycle processes defined in ISO/IEC 12207: 1995, Information Technology - Software Life Cycle Processes related to the requirements of ISO 9001:1994. After having performed full reviews of the WD3, CD1, CD2 and DIS drafts of the future ISO 9001:2000, this document will partly replace the part of ISO 9000-3: 1997 for measurement analysis and improvement of quality management system in computer software industry, as an interpretation for organizations and certification bodies, which will be withdrawn when ISO 9001:1994 is replaced by ISO 9001:2000,.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.593-599
• /
• 2021

The demand for e-VTOL aircraft is expected to be increased rapidly in the future as a means of urban transportation due to operating cost reduction, eco-friendliness and convenience of vertical take-off and landing using pilot-aids automation system. However, there are many technical hurdles to be solved in securing safety and certification which are essential for commercialization and urban operation. So far, there is no e-VTOL aircraft that has received type certificate and standard airworthiness certificate due to the technical problems and safety requirement differences with conventional aircraft. The e-VTOL aircraft certification should also meet the equivalent level of safety required by the current airworthiness standards, but there are existing problems in securing safety and meeting current standards. In this study, the e-VTOL's certification problems and technical limitations in satisfying the current standards are presented.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.90-101
• /
• 2008

Korean defense specifications are the technical criteria of military products and major factor of acquisition system. Weapon systems and acquisition technique have been advanced dramatically after 1990's, but Korean defense specification practice standard has stayed after early 1980's except embedded software. The current status of current Korean defense specification practice standard and trend of related design and acquisition techniques like M&S, SBA, and digital manufacturing have been reviewed. This paper suggests that transfer to product, IT oriented specification structure, adaptation of digital product model and reinforcement of engineering management systems to establish a development initiative of Korean defense specification practice standard.