• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.4
• /
• pp.354-361
• /
• 2016

While the amounts of oil spill caused by the VLCC Hebei Spirit indicated 2.5 times more than that of the VLCC Sea Prince, the economic, environmental, and social damages derived from the Hebei Spirit spill were estimated to be about 30 times greater than those from the Sea Prince incident. This study consolidates the appropriate justification for building a multi-purpose large oil spill response vessel to allow swift and efficient handling of catastrophic marine pollution events through an analysis of technical and economic feasibility of such a project. The result of the technical feasibility analysis illustrates that a hopper dredge and oil spill response vessel with a capacity of 4,000 tons should be more appropriate. The result of the economic feasibility analysis indicates that under the most conservative estimates the project appears to be slightly impractical, with a benefit/cost ratio of 0.82, in which self-help efforts, however, can facilitate the project. And medium to optimistic estimates present benefit/cost ratios are estimated to be 2.72 and 5.82 respectively, representing apparent economic feasibility.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.1
• /
• pp.1-13
• /
• 2005

The purpose of this paper analyze development feasibility and alternatives for infrared detector development in both technology and cost. Infrared Detector is core component of Thermal Imaging System and developed by ADD from 2006 10 2008 year. We got raw input data from development and technical expert, and then analyze cost and technology for development feasibility, and alternatives study. Technology level is analyzed by TRL(Technology Readiness Level) and AOA(Analysis of Alternatives) is done by development cost estimate. Estimating the development cost, we use SEER-H that is parametric cost estimating tool based on Knowledge Base. This study can help those who are related to the cost and development feasibility analysis of other weapon systems.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1724-1738
• /
• 2016

This paper was researched on economic feasibility and sensibility of operation to offshore cage culture for cod. Offshore cage culture for cod needs to invest high budget what to construction and operation. And it was required variety methods about analysis of economic feasibility. Therefore, these were studied NPV, B/C and sensitivity for each by assuming a six scenarios considering the product performance according to the size of cod and culturing methods of fingerlings, etc. As a results, even though economy, if efficiency is low, it is a priority need the technical development to promote the feed efficiency to increase economic feasibility and should make efforts to enhance the business economy to strengthen the price competitiveness pricing with high quality products through quality control and brand recognition of cod. It expects to be used as a reference for related research in the future by deriving policy implications based on the method of analysis of the economic feasibility on offshore cage culture for cod.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.547-556
• /
• 2009

In this paper, we tried to find the engineering feasibility of the component functions of the seven selected application technologies which are going to be installed on the next generation high speed train as the IT and smart sensor application technologies. The component functions of the seven applications, including the "Emergency or reminder notification", were identified and analyzed. In order to justify the feasibility of applications development, effect analysis and sufficiency analysis were performed. In effect analysis, how each function has an effect on safety, convenience, and efficiency of the passengers and attendants was evaluated. In sufficiency analysis, the importance and implementability of each function as a component was evaluated. The feasibility analysis was focused on the technical aspects of the functions. The following work will be the settlement of the final applications that are going to be designed and implemented. This will be done by studying the strategic feasibility in relation to the service or business of the high speed train.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.12-18
• /
• 1999

This research was undertaken to do the technical and economical feasibility study of membrane water treatment system. For the technical feasibility study, batch water treatment system using UF(ultrafiltration) was set up and several experiments were carried out. The performance of the UF membrane was tested in terms of turbidity. The experimental results showed that the UF membrane process produced less than 1 NTU water regardless of input water turbidity. For the economical feasibility study, the cost model was analyzed and programmed for simulation. Also costs of the membrane water treatment and the conventional treatment were evaluated. The simulation results showed that the unit production cost increased when design flow or permeate flow decreased. The production cost of membrane water treatment system was lower than that of the conventional system. Both technical and economical feasibility study showed that the UF membrane water purification system was a very competitive water purification process.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.43-50
• /
• 2015

An extensive literature survey and personal communication with relevant experts made it possible to understand economic and technical feasibility of disposable diaper recycling. Commercial level of soiled diaper recycling technology is currently available from a Dutch company, Knowaste Co., who owns a proprietary separation technology of the pulps, plastics and super absorbing polymer (SAP). In Korea, on the other hand, pre-consumer diaper recycling technology without material separation at its infancy converts manufacturing scraps into refuse plastic fuel (RPF), container/truck cargo boards or automobile boards/sheets. Although previous studies on feasibility of post-consumer recycling in Korea showed mutually contradictory implication, it was found out in this research that significantly positive economic feasibility can be obtained with pre-consumer diaper recycling. Subsequent recycling R&D including pre-consumer scrap and policy support may expedite 'Establishment of Sustainable Society.

• Advances in Energy Research
• /
• v.2 no.2
• /
• pp.85-95
• /
• 2014

Small Hydro-Power (SHP) is an environmental friendly technology. Usually hydro power generation projects are viewed as constructing large dams and reservoirs but available new research and engineering techniques have helped hydro power generation without large dams and without large reservoirs. In India, there are several water installations, irrigation dams, canals, streams or running rivers not tapped to generate power. In these cases the existing system and facilities can help in generating power with less investment and time. This area is yet unexplored. Harnessing a stream for hydroelectric power is a major undertaking for the energy crises and the global issues to go green. In this technical note a potential site for mini hydro power plant nearby Shoolini University is identified and examined for the economic feasibility.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.1
• /
• pp.9-16
• /
• 2009

Cylindrical dry forming mould was developed to carry out a feasibility study of dry forming of papers. The effect of disintegration, forming, humidification and pressing on dry formed papers was examined. Dry disintegrated fibers showed the similar fiber length distribution to wet disintegrated fibers, but they showed distorsion and damaged appearance on the surface. Process parameters required to form a uniform fiber pad was investigated. A proper screening and air dispersion method was selected that gives proper formation. Humidification and pressing conditions were examined to get a good dry formed papers in dry forming. Results showed that dry forming method can be used to make a sheets with reasonable formation and properties.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.356-358
• /
• 2005

This paper evaluates minimum and maximum power exchange considering economic and technical characteristics between Russia and ROK. First, we evaluate minimum power exchange to assure the economic feasibility by comparison with the total cost and benefit of the interconnected line. For evaluating maximum exchange power, system constraints are considered, which are examined through load flow and dynamic analysis by using the PSS/E program. As a result of these evaluations, we suggest the reasonable range of power exchange between ROK and Russia considering economic and technical constraints with the interconnection scenario that power system interconnection between ROK and Russia will be realized in the year 2010.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1513-1518
• /
• 1996

A force reflecting hand controller can be used to provide more realistic information to the operator of a teleoperation system such as kinesthetic feedback from a slave robot. In this paper, a new design concept of a force reflecting 6-DOF hand controller utilizing the kinematic structure of a Stewart Platform is presented. Based on the optimal design technique of a Stewart Platform, a force reflecting hand controller has been designed and constructed to verify the technical feasibility of proposed design concept. In order to provide an operator with kinesthetic feedback information, a force mapping algorithm based on a reciprocal product of screws has been introduced. Finally, the technical feasibility of the design concept has been demonstrated through some of experimental results of the device under virtual environment on a real-time graphic system.