• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1634-1641
• /
• 2021

Exposure to gamma-rays is hazardous for humans and other living beings because of their high penetration through the materials. For this reason, shielding materials (usually lead, copper and stainless steel) are used to protect against gamma rays. This study's objective was to prepare ceramic materials for gamma radiation shielding by using different natural bentonite clays. Gamma-ray attenuation performances of the prepared shielding materials at different thicknesses were investigated and evaluated for different gamma-ray energies from different standard point gamma radiation sources (²⁵¹Am, ⁵⁷Co, ¹³⁷Cs, ⁶⁰Co, and ⁸⁸Y). The mass and linear attenuation coefficients of the prepared ceramics vary between 0.238 and 0.443 cm² g^-1 and between 0.479 and 1.06 cm^-1, respectively, depending on their thicknesses. Results showed that these materials could be prioritized because of their evidential properties of gamma radiation protection in radiation applications.

• 수산경영론집
• /
• 제41권3호
• /
• pp.45-58
• /
• 2010

This study estimated the technical efficiency of coastal composite fishery in Korea by using the data envelopment analysis (DEA) and the stochastic frontier analysis (SFA) methods, and the results on the respective method were compared. In the DEA method, the constant returns to scale (CRS) and the variable returns to scale (VRS) output-oriented DEA models were separated and technical efficiencies were estimated, respectively. The average estimated value of technical efficiency by the SFA method (0.633) was found to be lower than that by the VRS-DEA method (0.738), while it was higher than that by the CRS-DEA method (0.479). It was found that strong correlation exists between the SFA method and the VRS-DEA method. The method which can utilize both methods in mutually complementing way for the estimation of technical efficiency was also considered.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.3-43
• /
• 1998

Technical and business transformations are reshaping the business of Diesel engine builders, Diesel lubricant marketers and additive companies. Key issues facing engine builders and end users under these transformations include: -Emission regulations -Vehicle operating costs -Evolving business environments With these challenges come opportunities. For equipment builders and lubricant marketers, these include: -Lubricants meeting global performance requirements -High value lubricant applications -Profitable new businesses

• 한국재난정보학회 논문집
• /
• 제5권2호
• /
• pp.108-122
• /
• 2009

Purpose of this research about reduction the scholastic systematic triangular position of the security guard martial art which repeats a development is insufficient with demand of the while society to recognize and for the philosophic value research of security guard martial art composition principle puts out with the one method and from the reporter to search the aesthetics which appears does. In order to attain the goal of the research which sees the literature which relates with an security guard martial art widly, was an investigation and observed the aesthetics from concept and martial art of aesthetics and this the technical free use ability from actual site of the technical find which leads the practice voluntary repetition practice of security guard martial art with character and the body guard aesthetic integral part experience possibly did, there being will be able to acquire an aesthetic inspiration, confirmed. So the security guard martial art follows the composition principle of maximization central attitude and shock point breath control and mental intensive etc. of reinforcement of direction shock of relativity redundancy mental moral culture body agreement characteristic force and relaxation force and is completed and will be able to embody an aesthetic value with aesthetic elements of technical polishing process inside goes about reduction.

• 식품보건융합연구
• /
• 제7권3호
• /
• pp.41-50
• /
• 2021

The purpose of this study is to analyze the work value factors regarded as important by the culinary-related graduates in their 20s, and also to analyze the effects of work value factors on the life satisfaction. To achieve this purpose, this study analyzed the data of 155 graduates from departments including 'culinary arts', 'foodservice', and 'confectionery' among the college graduates in their 20s who participated in GOMS 2018. The results of analysis are as follows. First, the new generation majors in culinary arts showed the high importance of their aptitude and interest, employment stability, earned income. Second, in relation to the major field, the male graduates majored in culinary arts more highly perceived the importance than the female graduates majored in culinary arts. On the other hand, regarding the social reputation of job and work duty, the female graduates majored in culinary arts more highly perceived the importance than the male graduates majored in culinary arts. Third, the developmental value factor of work value had positive effects on the life satisfaction. Thus, the career-related staffs or professors of college should provide the career guidance by considering gender when the majors in culinary arts transit to the labor market after graduation.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.1033-1039
• /
• 2020

Vietnam is conducting an export-led growth model and labour-intensive industries contributing majorly to the total export value. In the context of Industry 4.0, the labour-based industries are significantly affected; hence, enhancing productivity is the key measure to maintain these industries. The garment industry contributes significantly to the total export value of Vietnam. Based on meta-frontier framework, the approach of data envelopment analysis is used to measure technical efficiency of Vietnamese garment firms and the global Malmquist TFP index is utilised to identify productivity change and its components including efficiency, technology and technical gaps between different groups of firms. The data of Vietnamese garment firms from 2013 to 2018 collected from the Vietnam General Statistic Office is used in this study. The results show that: (i) The total factor productivity of Vietnamese garment firms growth, technical progress is the main contributor; (ii) The private garment sector is the leading group; (iii) There is a large technological gap among Vietnamese garment sectors. The private and FDI garment firms have experienced a growth in all components of total factor productivity change. Meanwhile, technological progress change is the main reason to constrain the productivity growth of state-owned garment firms.

• Journal of Preventive Medicine and Public Health
• /
• 제30권2호
• /
• pp.413-427
• /
• 1997

This research is based on the Consumption Values Theory proposed by Sheth(1991). The purpose of this research is finding the factors related to the process of hospital choice. The expectation of six hospital outpatients 600 was analyzed by six consumption values categories: functional value, social value, emotional value, rarity value, condition value, health related values. The main results of this research is as following; 1. In the result of factor analysis 22 consumption value factors which affect the hospital preference were extracted; kindness/clearness, service speed, comfort of space, technical competence in functional values, high income/active social life, low income/blue collar unmarried/man, middle aged/big family, woman/married, introvert in social values, high-class, comfort, reliability in emotional value, newness, classiness in rarity value, social relationship, close to residence, social reputation in conditional values, priority on health, health behavior, active sense of value on health in health related values. 2. The difference of consumption values among hospital types were analyzed. The critical factors in reference for corporate hospitals newly established were kindness/clearness, service speed, convenience, classiness, comfort, and newness. University hospitals were preferred by the factors of reliability, and social reputation. In general hospital, convenience and close to residence were critical factor. 3. In logistic regression, age, marital status, education level and income as socio-demographic variables were significantly related to general hospital choice. Also service speed and close to residence were positively and high income/active social life and high class value were negatively related to general hospital choice. On university hospital choice, age and marital status, education show posive relationship whereas income showing negative relationship. Kindness/clearness, service speed, comfort of space, unmarried/man, comfortable feeling, newness and close to residence showed negative relationship with university hospital selection whereas technical competence, reliability in emotional value, classiness in rarity value, social relationship in functional values showed positive relationship. Lastly kindness/clearness, comfort of space, high income/active social life, unmarried/man, high-class, comfort and newness were positively related to corporate hospitals newly established choice in contrast to negative relationship in reliability in emotional value and classiness. In summary, we found that hospital user also choose to hospital in base of various consumption value. Further studies to investigate the hospital consumer behavior will be needed.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.82-88
• /
• 2013

IEC standards do not require to limit the earthing resistance of the concrete-embedded foundation earthing electrode which is installed to a specific value. However, in Korea the value of $5{\Omega}$ and below applies to the earthing resistance for a domestic customer whose receiving voltage is 22.9kV. This paper calculates the minimum area and volume of the concrete-embedded foundation earthing electrode in order to obtain a specific value of the earthing resistance when the electrode of the building's lightning protection system and that of its power system are interconnected. It also suggested the most appropriate method of installing the foundation earthing electrode, taking the electric characteristics of concrete into account.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.79-81
• /
• 2005

Fuzz on the fabrics, which is the fibers protruded from the fabric surface, is very important in view of appearance quality, since it causes unpleasant appearance on the fabrics and also leads to pilling which makes fabric appearance and soft­ness worse. However, fuzz on fabric surface is measured mostly by subjective methods (human vision) rather than objective methods. Thus, in this study, objective method using image analysis techniques has been developed for the measurement of fuzz on fabric surface. Fuzz on the fabric has also been ranked and rated by experts in order to see the reliability of the results obtained from the fuzz measurement. It was observed that correlation coefficient (r) between rating value and objective mea­surement value was 0.9 and this correlation coefficient value confirmed the reliability of this method.

• Structural Engineering and Mechanics
• /
• 제22권2호
• /
• pp.131-150
• /
• 2006

Exact analytical solutions for in-plane static problems of planar curved beams with variable curvatures and variable cross-sections are derived by using the initial value method. The governing equations include the axial extension and shear deformation effects. The fundamental matrix required by the initial value method is obtained analytically. Then, the displacements, slopes and stress resultants are found analytically along the beam axis by using the fundamental matrix. The results are given in analytical forms. In order to show the advantages of the method, some examples are solved and the results are compared with the existing results in the literature. One of the advantages of the proposed method is that the high degree of statically indeterminacy adds no extra difficulty to the solution. For some examples, the deformed shape along the beam axis is determined and plotted and also the slope and stress resultants are given in tables.