• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.322-327
• /
• 2020

An Armor Piercing Fin Stabilized Discarding Sabot (APFSDS), which penetrates and sabotages the target by physical energy, consists of a general penetrator using Depleted Uranium (DU) or Tungsten Heavy Alloy (THA) but THA is preferable because of manufacturing and environmental issues. On a THA penetrator, the penetration performance is determined mainly by self-sharpening depending on the hardness and toughness of materials. In particular, the tensile strength and impact strength work as key factors. The correlation coefficient for the penetration performance of the tensile strength was 0.721 and the impact strength was -0.599. The improved penetration performance by additional heat treatment was proven experimentally. Therefore, maintaining elongation over 9 % and tensile strength over 123 kg/㎟ is desirable, and the impact strength should be less than 6.8 kg·m/㎠ for good penetration performance.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.269-278
• /
• 2020

In this paper, the mechanical characteristics of the open type hyperbolic-parabolic membrane structure under wind load were investigated. First, the numerical simulation of a typical plane membrane structure was performed based on the Large-Eddy Simulation method. The accuracy of the simulation method was validated by the corresponding wind tunnel test results. Then, the wind load shape coefficients of open type hyperbolic-parabolic membrane structures are obtained from the series of numerical calculations and compared with the recommended values in the "Technical Specification for Membrane Structures (CECS 158: 2015). Finally, the influences of the wind directions and wind speeds on the mean wind pressure distribution of open type hyperbolic-parabolic membrane structures were investigated. This study aims to gain a better understanding of the wind-induced response for this type of structure and be useful to engineers and researchers.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.443-448
• /
• 2020

In this study, field measurements were performed to analyze the effects of train types (AREX, AREX Express, KTX, KTX-Sancheon) and train speeds on the dynamic behavior of the direct fixation track structure on Yeongjong grand bridge by bridge type (truss bridge, suspension bridge). Based on field measurement results, the track impact factor and train running stability (coefficient of derailment, Rate of wheel load reduction, lateral displacement of rail head) are compared with domestic and foreign standards and regulations to influence the dynamic behavior of direct fixation track. As a result, the differences in the dynamic behavior of the direct fixation tracks by the type of bridges of Yeongjong bridge are not significant, but it was analyzed that these were more directly affected by the magnitude of the train load. Therefore, it is necessary to establish the reinforcement plan of the direct fixation track structure on Yeongjong grand bridge in consideration of the increase of the track impact factor and dynamic track force.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.3
• /
• pp.39-50
• /
• 2020

Purpose: Agriculture, which is heavily influenced by climate conditions, is one of the industries most affected by climate change. In this respect, various studies on the impact of climate change on the agricultural market have been conducted. Since climate change is a long-term phenomenon for more than a decade, long-term projections of agricultural prices as well as climate variables are needed to properly analyze the impact of climate change on the agricultural market. However, these long-term price projections are often major constraints on studies of climate changes. The purpose of this study is to analyze the impacts of climate changes on the Korean onion market using ex-post analysis approach in order to avoid the difficulties of long-term price projections. Research design, data and methodology: This study develops an annual dynamic partial equilibrium model of Korean onion market. The behavioral equations of the model were estimated by OLS based on the annual data from 1988 to 2018. The modelling system is first simulated to have actual onion market conditions from 2014 to 2018 as a baseline and then compared it to the scenario assuming the climatic conditions under RCP8.5 over the same period. Scenario analyses were simulated by both comparative static and dynamic approach to evaluate the differences between the two approaches. Results: According to the empirical results, if the climate conditions under RCP8.5 were applied from 2014 to 2018, the yield of onion would increase by about 4%, and the price of onion would decrease from 3.7% to 17.4%. In addition, the average price fluctuation rate over the five years under RCP8.5 climate conditions is 56%, which is more volatile than 46% under actual climate conditions. Empirical results also show that the price decreases have been alleviated in dynamic model compared with comparative static model. Conclusions: Empirical results show that climate change is expected to increase onion yields and reduce onion prices. Therefore, the appropriate countermeasures against climate change in Korean onion market should be found in the stabilization of supply and demand for price stabilization rather than technical aspects such as the development of new varieties to increase productivity.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.3
• /
• pp.127-136
• /
• 2011

The typical unit infrastructure cost estimation techniques adopted so far in implementing the Korean Impact Fee Zoning have rather been centered around the unilateral simple cost models. The techniques, as such, have frequently been criticized for their lack of flexibility in properly reflecting the regional differences as well as the peculiarities of individual development projects. The Ministry of Land, Transport, and Maritime Affairs (MLTM), in this regard, has recently introduced an enhanced alternative technique. Using the NGIS data, the study probes the viability of the MLTM's new technique by testing the entire estimation process based on the case area in Ansung City. Reflecting the City's characteristics, the study assumes a composite land use plan that accommodates the industrial area in addition to typical residential areas. As an extensive empirical case study, the research has found from the new technique considerable technical merits to overcome the existing shortcomings and summarized its significant policy implications.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.59-70
• /
• 2009

This study is concerned with the correlation between microstructure and mechanical properties in heat affected zones (HAZs) of API X80 pipeline steels containing complex oxides. Three kinds of specimens were fabricated by varying alloying elements of Ti, Al, and Mg to form complex oxides, and their microstructures, Vickers hardness, Charpy impact properties were investigated. The number of complex oxides increased as the excess amount of Ti, Al, and Mg was included in the steels. The simulated HAZs containing a number of oxides showed a high volume fraction of acicular ferrite region because oxides acted as nucleation sites for acicular ferrite. According to the correlation study between thermal input, volume fraction of acicular ferrite region, and Charpy impact properties, the ductile fracture occurred predominantly when the volume fraction of acicular ferrite region was 65% or higher, and the Charpy absorbed energy was excellent over 200 J. When the volume fraction of acicular ferrite region was 35% or lower, the Charpy absorbed energy was poor below 50 J as the brittle cleavage fracture occurred. These findings suggested that the active nucleation of acicular ferrite in the oxide-containing steel HAZs was associated with the great improvement of Charpy impact properties of the HAZs.

• Korean Journal of Organic Agriculture
• /
• v.30 no.4
• /
• pp.451-470
• /
• 2022

Recently, the environment has been recognized as an important factor in increasing competitiveness in the industry. In agriculture and rural areas, the environment is becoming important in terms of the competitive advantage of agricultural products and continued regional development. This study intended to provide farmers with basic data for the continuous development of local agriculture through exploratory studies of environmental behaviors and regional development. In this study, 107 questionnaires were used for analysis of farmers in Jinan County to analyze the impact of farmers' environmental consciousness on regional development, and the research model was verified using a structural equation model. As a result of the analysis, it was analyzed that among the components of the environmental consciousness of farmers, environmental health has a statistically significant positive effect on environmental behaviors, while environmental interest and soil environment do not have an impact. The environmental behaviors of farmers have not been shown to be statistically significant to regional development. As a result of the analysis of this research, first, it is necessary to foster at the local level by establishing a customized fostering system for each village and region, such as education and technical support to vitalize the participation of young farmers and small and medium-sized farmers through the establishment of an Eco-friendly agricultural organization support system. It is necessary to raise public awareness of the public good function of agriculture and expand opportunities for sharing the value of Eco-friendly agriculture.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.170-178
• /
• 2022

A high-performing Earned Value Management System (EVMS) can influence project success and help stakeholders meet project objectives. Although EVMS processes are well-supported by technical guidelines and standards, project managers often face challenges related to the project culture, team, resources, and business practices that make up the project environment within which an EVMS is being used. A comprehensive literature review revealed a lack of a data-driven and consistent assessment frameworks that can gauge the environment surrounding EVMS implementation. This paper will discuss the EVMS environment of construction and environmental projects, and examine its impact on cost performance. The authors used a multi-method approach to identify 27 environment factors that make up the EVMS environment, assessing them on 18 construction and environmental projects worth over $2 billion of total cost. Research methods employed include: (1) a literature review of more than 300 references; (2) a survey of 294 respondents; and (3) remote research charrettes with more than 60 participating expert practitioners. Culture (one of the identified environment categories) was found to be relatively more important in terms of its impact on the EVMS environment, followed by people, practices, and resources. These exploratory results show statistically significant differences in cost performance between completed projects with either a good or poor environment, for the sample projects. Key environment factors are outlined, and guidance is provided to practitioners around how to set up an effective EVMS environment in a construction or environmental project to inform decision-making and support achieving the project cost objectives successfully.

• Journal of Environmental Impact Assessment
• /
• v.17 no.2
• /
• pp.113-124
• /
• 2008

A worldwide trend of permitting system for industrial installation to achieve a high level of protection of the environment has been moved from single media to multimedia in approach. The Council of the European Community issued the Directive 96/61/EC, the IPPC Directive, concerning integrated pollution prevention and control in 1996. The IPPC Directive is one of the most ambitious legal measures that the European Union (EU) has initiated with a view to applying the prevention principle for industrial activities. The IPPC aims to achieve the integrated prevention and reduction of environmental pollution emitted by those industrial installations with a higher potential of emissions to the environment. Organization for Economic Cooperation and Development (OECD) recommended on Environmental Performance Reviews of Korea in 2006 that IPPC permitting concept should be considered for large stationary sources at the national and regional levels. Any Korean law doesn't provide for integrated pollution control with a single process covering all pollution from economic activities. However, one exception might be the "environmentally-friendly companies" certification scheme, introduced in 1995, in which participants agree to meet targets beyond the legal emission limit values in exchange for government technical and financial support to operate environmental management systems. The other exception might be Environmental impact assessment (EIA) of projects, in 1977, which has been strengthened and reinforced to be more preventive through development of the prior environmental review system (PERS) in 1999. The aim of this work is to introduce the contents of IPPC Directive at the viewpoint of Korea policy and to survey the integrated approaching concept of Environmentally-Friendly Companies (EFC) Certification Scheme and EIA policy of Korea. The study will be helpful in the future to prepare the infrastructure of integrated permitting system and to enforce the integrated permit which the authorities of local government issues on industrial activities. It can be said that the data calculated through both EFC Certification Scheme and EIA will be discussed as worthful information to determine Korean BAT reference notes for integrated permitting process.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.139-153
• /
• 2003

The purpose of the study was to present technical guidance about the field goal kicking motion in American football for novices. For this purpose, kinematic analysis on the field goal kicking motion of two skilled players and two unskilled players was carried out. The following conclusions were made: 1. In comparison on the total elapsed time of the kicking, there were no significant differences between two groups. The progressing time from BP event to impact among experts group, however, took 0.141 second less than that of novices group. 2. The experts group showed right hip rotatier horizontally toward the targeted ball fixing left hip as the axis. On the other hand, the novices group didn't use the left hip as the axis in the kicking motion. 3. At the impact of kicking the ball, regarding with the distance of the ball and the supporting leg, the right and left distance of experts was 3.45cm longer than that of novices, the front and the rear distance of experts was 5.14cm shorter than novices. 4. At the impact, experts' initial velocity of the targeted ball was $5.27^m/s$ faster than novices', besides experts' incidence angular displacement was $3.78^{\circ}$ larger than novices'. 5. After BP event, experts showed a stable movement maintaining flexion and extension at left hip joint and knee joint. On the other hand, for novices, the angle of the left lower extremities became larger. 6. Experts showed the efficient flexion and extension of the hip joint and the knee joint during following procedure in the whole event of the kicking motion. At the BP event, the right knee joint angle of novices was $11.46^{\circ}$ larger than that of experts. However, the duration of the impact event and FT event among, novices had less extension of knee joint than experts. 7. At the 2nd phase, for both of the groups, the angular velocity of the knee joint drastically increased as the angular velocity of hip joint decreased. However, only novices showed the largest negative angular velocity at the impact.