• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5745-5751
• /
• 2012

The value chain of a country is achieved in cooperation with other countries. Accordingly, the international technical cooperation in the field of R&D is known to be one of the innovation strategies. But the efforts on research in the international technological cooperation is lacking in Korea. Europe expects technological progress in the industrial area in order to create employment in the near future but Science and Technology Research should also create this endeavor for the future. EU recognizes that the current trend of scientific and technological research will have a negative impact on future job creations in Europe. Therefore EU has developed the 2020 strategy. The purpose of this paper is to seek the technological cooperation policy especially on the basis of the EU's 2020 strategy. In accordance with the results of this paper, our government will pursue future EU FP 8 policy to be developed on the basis of EU's 2020 strategy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.400-406
• /
• 2017

This study was conducted to provide improvement measures for Korea's medicinal crop farmers whose business has been severely damaged by imported medicinal herbs. To accomplish this, the performance and efficiency of farming Angelica dahurica and Bupleurum falcatum were analyzed. The results of the analysis can be summarized as follows. First, the farming households cultivating Angelica dahurica had an average revenue of 1,363,000 KRW per 10 acres. The average income per 10 acres was 500,000 KRW, and the income ratio was 36.7%. Second, the farming households cultivating Bupleurum falcatum had an average revenue of 1,705,000 KRW per 10 acres, with an average income per 10 acres of 873,000 KRW and an income ratio of 44.6%. Third, the farming households cultivating Angelica dahurica were found to have a technical efficiency of 0.790, a pure technical efficiency of 0.856, and a scale efficiency of 0.924. Fourth, the farming households cultivating Bupleurum falcatum were found to have a technical efficiency of 0.670, a pure technical efficiency of 0.794, and a scale efficiency of 0.844. Both Angelica dahurica and Bupleurum falcatum farming households showed relative differences in technical efficiency. The pure technical aspects, rather than the scale aspects, were shown to contribute more to the differences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.653-664
• /
• 2011

In this study, I collected materials through the survey whose object is 573 students of technical high schools and 512 students of academic high schools in Seoul and Kyunggi areas, for examining dangerous factors and protective factors which influence on school resilience in technical high schools. The studying results are as followed. First, as the result of analyzing correlation between school resilience and dangerous factor, the higher dangerous factor was, the lower school resilience was. Second, as the result verifying the effects of dangerous factor on school resilience, discrimination of teacher, delinquency bond and anti-sociality made an effect on students in technical high schools and discrimination of teacher, delinquency bond and depression made an effect on students in academic high schools. Third, as the result analyzing correlation between school resilience and protective factor, the higher protective factor was, the higher school resilience was. Forth, as the result verifying the effects of protective factor on school resilience, support of teacher, democratic atmosphere of school, sense of responsibility, family cohesion, self-worth, rational supporting attitude made an effort on students in technical high schools and support of teacher, democratic atmosphere of school, sense of responsibility and family cohesion made an effect on students in academic high schools. Fifth, as the result analyzing the difference between dangerous factor and protective factor according to grade of school and standard of school resilience, there was an interaction in variables of anti-sociality, depression, delinquency bond and self-worth.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.1
• /
• pp.156-164
• /
• 2012

Education support programs in underdeveloped countries are important parts of Korea Official Development Assistance (ODA). Even though Education aid for underdeveloped country is increasing every year, expectations of underdeveloped countries for educational cooperation is not enough. Korea's remarkable economic growth is essential to technical education and training that has been investing in fact. Currently, in the underdeveloped country it is needed human resources development for poverty reduction and national economic development. The purpose of this study is to suggest a strategic approach method for technical education support maximizing the effectiveness in the economic development of recipient countries.

• Nuclear Engineering and Technology
• /
• v.29 no.6
• /
• pp.488-499
• /
• 1997

The measurements of the moderator temperature coefficient (MTC) are performed to demonstrate that the calculational model produces results that are consistent with the measurements. Since negative MTC is also a technical specification value that may limit the cycle length, it is important to measure it as accurately as possible. In this report, preferred choice of test method depending on the time in cycle, best power indication and temperature definition in MTC calculation were determined based on the MTC test results taken during initial startup testing and at 2/3 cycle burnup in the Yonggwang nuclear power plant. The results show that the ratio and rodded methods provided good agreement with the predictions during initial startup testing. However, near end-of-cycle the depletion method gives better results, and so is suggested to be used in the MTC measurements at 2/3 cycle burnup. The use of primary Delta T power as a power indicator in the MTC calculations is highly advisable since it responds with good consistent results very quickly to changes unlike secondary calorimetric power. For the appropriate temperature definitions used in the MTC calculations, it is considered that the arithmetic average temperature measured simply by inlet and outlet thermocouples is preferred. Although volumetric average temperature provides better results, the improvement is not sufficient to compensate for the simplicity of calculations by arithmetic average temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4177-4183
• /
• 2014

This study estimated and decomposed the productivity changes into technological change and efficiency change components for the photonics industry and examined ways of imporving the productive efficiency. Unlike most previous studies, this study employed a non-oriented Malmquist productivity index, which is a non-radial method and deals directly with the input surpluses and output shortfalls. The empirical results show that the productivity of the photonics industry has increased. The main reason for this is the increase in technical efficiency. In addition, there was a statistically significant difference in the productivity changes according to the firm's geographic location and participation in government support programs. These findings suggest that the government's regional strategic industry promotion policy has contributed to improvements in the productive efficiency of photonics industry. The approach presented in this study could be used as a practical reference guide to help enhance the competitiveness of the photonics industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6547-6555
• /
• 2014

This study attempted to verify what motivates fans to follow college sports teams' social media and identify the motivational factors that can best predict fans' social media consumption. Confirmatory Factor Analysis (CFA) indicated that previously identified seven motives for online consumption, i.e., information, diversion, socialization, pass-time, fanship, team support, and technical knowledge, are compatible with the use of college sports teams' social media. In addition, a results of multiple regression found diversion, socialization, fanship, team support, and technical knowledge to significantly predict the level of social media consumption while information and pass-time did not significantly affect social media consumption. In particular, socialization had the greatest influence on social media consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2835-2839
• /
• 2010

This paper estimated the technical specialization of UAV system by analyzing related patents. For that, variable indicators such as patent numbers regarding country, subsystem technic, periods and revealed number of patents are used in this paper. RPA and PII index are also used to estimate technical specialization of the coutry. Positive RPA value means superior competitiveness, and vice versa. PII means the quality of the patent. PII value more than 1 means that the quality of the patent is better than others, Otherwise the quality of the patent is worse. This paper estimated the specialization of technologies among countries using above two index.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.596-600
• /
• 2016

This paper describes the research aimed at improving the evaluation method of practical exams in a field of welding on a national technical qualification examination based on national competency standards (NCS). In this study, new evaluation methods of practical exams on master craftsman welding reflect the latest welding technique trends and are applied to the ability unit and the fulfillment criteria of the national competency standards. The effects are then verified through an advisory conference and demonstration evaluation. The practical exams on the master craftsman welding in the current welding field were analyzed systematically. In the future, the national technical qualification examination of master crafts welding will be applied after completing the revision of the question standards through an expert group in its duty fields based on this research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5993-5999
• /
• 2013

This study presents the information management item and the business process improvement plan managed all construction technique services of Design, Construction Supervision and Construction Management which is ordered and constracted by the public institution in the field of construction and business steps. In addition, it develped the Management System of Construction Technique Service Performances based on improved processes for the Public Agencies and Construction Service Director to register, review and approve the Service Performance Information. As a result, it would be help transparently managed Technical Engineer's work duplication status of Constuction Company, and checked online without having to submit Company performance data by providing objective and reliable information.