• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.10
• /
• pp.27-81
• /
• 1999

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.179-187
• /
• 2022

The project performances can be measured in terms of meeting the project schedule, budget, and conformance to functional and technical specifications. Numerous studies have been conducted to examine the causes and effects of change orders for both vertical and horizontal construction, respectively. However, these studies mainly focus on a single project type, so this paper examines the impact of change order for cost growth and schedule overruns using four different building types to close the gap in the change order research area. A total of 211 building projects are collected from four building types: healthcare, residential, office, and education. Statistical analyses using ANOVA tests and linear regression models are used to examine the created metric $CO/day on the cost and schedule impacts. The results found that mean $CO/day values were not statistically different among building types, and that the sum of change orders is a statistically significant predictor of $CO/day. The results will help project stakeholders mitigate the negative change orders effects can be a challenge for project managers and researchers alike.

• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.3
• /
• pp.186-192
• /
• 2010

The present study classified the auto-parts makers into four groups according to their investment ownership. Four groups consist the one fully owned by Koreans, the one fully owned by foreigners, the one owned less than 100% but more than 50% by foreigners, lastly the one owned by less than or equal to 50% by foreigners. Among these, the auto-parts makers, 100% foreign ownership, have the highest Malmquist productivity index while 100% Korean-owned part-makers has the lowest productivity. In case of the 100% foreign ownership companies, the cause of Malmquist change, however, is attributed to the technical efficiency change. In particular, the pure technical change is the main source of the Malmquist change. This may indicate that the 100% foreign-owned companies have successfully transferred their production process technologies to the Korean plants. They are enjoying so called the "imitation-effect." 100% Korean-owned companies were not able to create the "imitationeffect" and therefore failed to close the gap with the foreign-owned companies in terms of the production efficiency. 100% Korean-owned auto-parts makers, however, outperformed the foreign-owned companies in the technological change. The outstanding technological change may indicate that Korean-owned part makers were able to narrow the gap with the foreign-owned companies in the area of engineering technological capabilities. The same results were also observed for 50% foreign-owned companies. Knowing that the core competence of the auto-parts makers lies on the engineering technological capabilities, the research found that the most desirable form of the foreign investment was 50% of foreign ownership.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.13-23
• /
• 1998

Two major cellulase components purified with sephadex G-75 and DEAE sepharose were applied to bleached kraft pulp to inverstigate the change of fiber properties. Cellulose viscosity was very sensitive to $C_x$ component treatment (more than 15% drop was observed) while being little influenced by $C_1$, component (only 2% drop). Fiber fraction longer than 2mm was reduced by $C_x$ treatment while short fiber fraction was increased greatly by more than 15%. There was little change in fiber length distribution by combined treatment of $C_1$ 1 and $C_x$ at equal. In this case, fine contents increased by more than 2.5% at equivalent refining time. WRV and Density were increased as the amount of $C_1$ or $C_x$ treatment was increased. $C_{x}$ was main cause for increasing them. But the effect fell as enzyme dosage.

• Asia pacific journal of information systems
• /
• v.33 no.4
• /
• pp.1171-1187
• /
• 2023

This study explores how an organization has successfully implemented ML-supported HR services to resolve high employee turnover problems in the IT sector. The empirical setting of the research is where contradicting institutional logics exist among technical, HR, and business groups regarding the ML model development and use of the model predictions in HR services. Institutional framework is used to identify the roles of organizational actors and the legitimacy structures in the organizational environments that can shape or constrain the ML led organizational changes. In institutional theories, technology adoption and organizational change are not only constrained by organizational context, but also fostered through organizational actors' roles and efforts to increase the legitimacy for the change. This research found that when multiple contradicting institutional logics exist, legitimizing the establishment of an enabling environment for multiple logics to reconcile and for the project to move forward is critical. Industry-wide conditions, previous experiences with the pilot ML project, forming a TFT with clearly defined roles and responsibilities, and relevant KPIs are found to legitimize the HR team and the business division to collaborate with the technical personnel to launch ML-supported HR services.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.625-626
• /
• 2008

The magnetic domain-refining techniques such as ball scratching, laser irradiation and plasma have been developed to reduce the domain wall spacing and thus iron losses in Fe-3%Si grain-oriented silicon steels. In view point of magnetic properties, it was supposed that the locally residual stresses change the magnetoelastic energy of the material and thus the spacing between $180^{\circ}$ domain walls decreases in order to reduce the magnetostatic energy. The effect of laser irradiation on iron loss and magnetostriction reduction for Fe-3%Si grain-oriented steel were investigated. Since the local tensile stresses were induced at the surface of Fe-3%Si steel by the laser irradiation, the minimum iron loss caused by reducing eddy current loss was obtained in spiete of the decrease of permeability by hindering eddy current loss was obtained in spite of the decrease of permeability by hindering the domain wall movement around the induced stress field. Furthermore, the laser treated 3%Si steel has lower magnetostriction as compared to non laser-treated steel and is less sensitive to applying pre-stresses due to the volume reduction of $90^{\circ}$ domain in materials.

• Geomechanics and Engineering
• /
• v.10 no.6
• /
• pp.775-791
• /
• 2016

The indirect tensile strengths (ITSs) of different cemented paste backfill mixes with different curing times were determined by considering crack initiation and fracture toughness concepts under different loading conditions of steel loading arcs with various contact angles, flat platens and the standard Brazilian test jaw. Because contact area of the ITS test discs developes rapidly and varies in accordance with the deformability, ITSs of curing materials were not found convenient to determine under the loading apparatus with indefinite contact angle. ITS values increasing with an increase in contact angle can be measured to be excessively high because of the high contact angles resulted from the deformable characteristics of the soft paste backfill materials. As a result of the change of deformation characteristics with the change of curing time, discs have different contact conditions causing an important disadvantage to reflect the strength change due to the curing reactions. In addition to the experimental study, finite element analyses were performed on several types of disc models under various loading conditions. As a result, a comparison between all loading conditions was made to determine the best ITSs of the cemented paste backfill materials. Both experimental and numerical analyses concluded that loading arcs with definite contact angles gives better results than those obtained with the other loading apparatus without a definite contact angle. Loading arcs with the contact angle of $15^{\circ}$ was found the most convenient loading apparatus for the typical cemented paste backfill materials, although it should be used carefully considering the failure cracks for a valid test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.139-148
• /
• 2019

The paper proposes an analytical framework for the impact of technical change on business model innovation. Based upon the examination of the relationship between the mission of business and technology, it introduces classification of technology-based business models such as problem-solving model, production model and network model, respectively employing intensive technology, interlinked technology and mediating technology as a key technology. The discussion of various cases of business model innovation shows that the impact of digital technology is first translated into the value generation in terms of efficiency or effectiveness. These new values then enable a new business model which is based on a different key technology through business model shift, expansion, unbundling, or platform. Quite often those business model changes involves system-wide innovation. The framework for the analysis of the impact of technical change on business model innovation is presented with directions for future research.

• Korean Journal of Metals and Materials
• /
• v.46 no.4
• /
• pp.257-266
• /
• 2008

AHydrogen induced cracking (HIC) was phenomenologically studied in terms of the effect of nonmetallic inclusions and hot rolling process parameters. By comparing the level of non-metallic inclusions in two different kinds of commercial grade steels having different HIC resistance, the role of non-metallic inclusions in HIC occurrence was investigated. Change in inclusion morphology and distribution during hot rolling was also studied throughout slab, rolling at austenite recrystallization region (roughing mill; RM) and rolling at austenite non-recrystallization region (finish mill; FM). In addition, the contribution of RM and FM parameters to HIC was investigated from the standpoint of change in inclusion morphology during hot rolling processes. As a result, HIC was closely related to the separation of large complex inclusion during hot rolling process. Large complex inclusions originated from the improper Ca treatment, after which equilibrium composition of slag should have resulted in eutectoid composition. By controlling the equilibrium slag composition equivalent to eutectoid one, HIC resistance could be improved due to the reduced size of inclusions. In addition, change in reduction/pass in RM had an effect on HIC resistance of steels while that in FM did not. Increase in the reduction/pass in the latter stage of RM improved HIC resistance of steels by enhancing the void enclosure around inclusions.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.63-71
• /
• 2018

This paper discusses decommissioning procedure requirements management using requirement engineering to systematically manage the technical requirements and criteria that are required in decontamination and decommissioning activities, and the regulatory requirements that should be complied with in a decommissioning strategy for research reactors and nuclear power plants. A schema was designed to establish the traceability and change management related to the linkage between the regulatory requirements and technical criteria after classifying the procedures into four groups during the full life-cycle of the decommissioning. The results confirmed that the designed schema was successfully traced in accordance with the regulatory requirements and technical criteria required by various fields in terms of decontamination and decommissioning activities. In addition, the changes before and after the revision of the Nuclear Safety Act were also determined. The dismantling procedure requirement management system secured through this study is expected to be a useful tool in the integrated management of radioactive waste, as well as in the dismantling of research reactor and nuclear facilities.