• 정보보호학회논문지
• /
• 제12권4호
• /
• pp.41-53
• /
• 2002

접근제어는 사용자가 자원에 접근시 해당자원에 대한 접근권한이 있는지를 검토해 접근을 허가하거나 거부하는 것을 말한다. 대표적인 접근제어 방법으로는 임의적 접근제어, 강제적 접근제어, 역할기반 접근제어가 있으며 현재는 역할기반 접근제어 방법이 좋은 평가를 받고 있다. 그러나 지금까지의 역할기반 접근제어 모델은 업무가 표준화 되어 있고 변화가 없는 안정적인 구조의 상하관계가 명백한 관료제의 조직 구조들을 지원하는 모델들이었다. 일부 Team Based Access Control Model 과 같은 팀 개념을 지원하는 접근제어 모델이 제안되긴 하였지만 기업의 태스크포스팀과 같은 유기적이며 임시적이고 업무가 표준화되어 있지 않고 환경변화가 많으며 상하관계가 분명치 않은 애드호크러시 조직의 특성을 충분히 반영하지는 못했다. 본 논문에서는 기존의 관료제 조직과 다른 애드호크러시 조직의 특성을 살펴보고 이러한 특성으로 인해 기존의 접근제어 모델들이 애드호크러시 조직의 접근제어 모델로서 사용시 발생되는 문제들을 살펴보았고 이러한 문제들을 해결하기 위한 개선된 역할기반 접근제어 모델을 제안하고 주요 평가기준에 따라서 분석하였다.

• 대한약침학회지
• /
• 제25권3호
• /
• pp.242-249
• /
• 2022

Objectives: The aim of this work is to evaluate the in vitro antioxidant, hypoglycemic, and antiobesity effects of Euphorbia resinifera extracts and investigate the phenolic constituents and the toxicity of these extracts. Methods: Phytochemical screening was performed to detect polyphenols and flavonoids. Antioxidant activity was evaluated by four methods (DPPH, ABTS, H₂O₂, and xanthine oxidase inhibition). The hypoglycemic effect was determined by the inhibition of α-amylase and α-glucosidase enzymes in vitro and via a starch tolerance study in normal rats. The antiobesity effect was estimated by in vitro inhibition of lipase. Results: Phytochemical screening revealed that the ethanolic extract was rich in polyphenols (99 ± 0.56 mg GEA/g extract) and tannins (55.22 ± 0.17 mg RE/g extract). Moreover, this extract showed higher antioxidant activity in different tests: the DPPH assay (IC₅₀ = 53.81 ± 1.83 ㎍/mL), ABTS assay (111.4 ± 2.64 mg TE/g extract), H₂O₂ (IC₅₀ = 98.15 ± 0.68 ㎍/mL), and xanthine oxidase (IC₅₀ = 10.26 ± 0.6 ㎍/mL). With respect to hypoglycemic effect, the aqueous and ethanolic extracts showed IC₅₀ values of 119.7 ± 2.15 ㎍/mL and 102 ± 3.63 ㎍/mL for α-amylase and 121.4 ± 1.88 and 56.6 ± 1.12 ㎍/mL for α-glucosidase, respectively, and the extracts lowered blood glucose levels in normal starch-loaded rats. Additionally, lipase inhibition was observed with aqueous (IC₅₀ = 25.3 ± 1.53 ㎍/mL) and ethanolic (IC₅₀ = 13.7 ± 3.03 ㎍/mL) extracts. Conclusion: These findings show the antioxidant, hypoglycemic, and hyperlipidemic effects of E. resinifera extracts, which should be investigated further to validate their medicinal uses and their pharmaceutical applications.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.58-63
• /
• 2020

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them.

• 한국산업보건학회지
• /
• 제25권1호
• /
• pp.36-44
• /
• 2015

Objectives: This study aimed to elucidate the physicochemical properties of silica powder and airborne particles as by-products generated from fabrication processes to reduce unknown risk factors in the semiconductor manufacturing work environment. Materials and Methods: Sampling was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. Thirty-two powder and airborne by-product samples, diffusion(10), chemical vapor deposition(10), chemical mechanical polishing(5), clean(5), etch process(2), were collected from inner chamber parts from process and 1st scrubber equipment during maintenance and process operation. The chemical composition, size, shape, and crystal structure of silica by-product particles were determined by using scanning electron microscopy and transmission electron microscopy techniques equipped with energy dispersive spectroscopy, and x-ray diffractometry. Results: All powder and airborne particle samples were composed of oxygen(O) and silicon(Si), which means silica particle. The by-product particles were nearly spherical $SiO_2$ and the particle size ranged 25 nm to $50{\mu}m$, and most of the particles were usually agglomerated within a particle size range from approximately 25 nm to 500 nm. In addition, the crystal structure of the silica powder particles was found to be an amorphous silica. Conclusions: The silica by-product particles generated from the semiconductor manufacturing processes are amorphous $SiO_2$, which is considered a less toxic form. These results should provide useful information for alternative strategies to improve the work environment and workers' health.

• 한국분말재료학회지
• /
• 제24권3호
• /
• pp.202-209
• /
• 2017

A cold-work tool steel powder is used to fabricate 3-dimensional objects by selective laser melting using a high-pressure gas atomization process. The spherical powder particles form continuous carbide networks among the austenite matrix and its decomposition products. The carbides comprise Nb-rich MC and Mo-rich $M_2C$. In the SLM process, the process parameters such as the laser power (90 W), layer thickness ($25{\mu}m$), and hatch spacing ($80{\mu}m$) are kept fixed, while the scan speed is changed from 50 mm/s to 4000 mm/s. At a low scan speed of 50 mm/s, spherical cavities develop due to over melting, while they are substantially reduced on increasing the speed to 2000 mm/s. The carbide network spacing decreases with increasing speed. At an excessively high speed of 4000 mm/s, long and irregularly shaped cavities are developed due to incomplete melting. The influence of the scan pattern is examined, for which $1{\times}1 mm^2$ blocks constituting a processing layer are irradiated in a random sequence. This island-type pattern exhibits the same effect as that of a low scan speed. Post processing of an object using hot isostatic pressing leads to a great reduction in the porosity but causes coarsening of the microstructure.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.458-465
• /
• 2013

Ship design engineering refers to the development and design of shipbuilding architectures in a drawing which reflects all relevant manufacturing processes. This paper provides analysis methods for model-information interfaces between hull structure design and outfitting design, and a technical application for manufacturing phases reflecting the pipe support pad and angle item automatically. The existing information procedure of pipe support pad and angle system processes information using drawing without model specification. Outfitting design team directly distributes drawings to the shop floor then manual-based marking and installation work are conducted refer to the distributed drawings. As a result, this process has become time consuming and causes problems in the productivity and quality improvement due to the rework caused by omitted or incorrect marking. The pipe support pad and angle marking is a method that automatically updates model information to hull structure design using sets of data that analyse the generated model in outfitting design processes. Therefore, this approach provides an efficient solution through design references without manual activities such as a reflection of hull structure design, cutting process, numerical control work, and dimension measurement and marking. The conversion of a method from the existing procedure based on manual marking to the reflective and automatic approach would have enabled to proceed installation work without manual activities for the measurement. Therefore, this research study proposes an efficient approach using pre-data analysis of model information interfaces between design and manufacturing phases to improve productivity during construction for shipbuilding.

• 농촌지도와개발
• /
• 제19권1호
• /
• pp.1-28
• /
• 2012

The Extension Program accountability will continue to be an influential force to develop agriculture and rural area. As we incorporate new approaches into our service program and respond to new domains of knowledge, we must also consider how our assessment strategies may need to change in order to meet local and other external standards. The main purpose of the study was to be what the best way of Extension Service is set farmers' educational needs met and to be what kind of methodologies and role of Extension system should provide for their faced problem solving effectively. The major results of the study on Farmers' needs toward Korean Extension Services are summarized as follows. First, it is observed that, when the farmers' perceptions were analyzed, the most ranked by the farmers' needs was "having nice extension workers to get advice and solve their problems on the farm in all at once." Farmers had especially more positive attitudes in the categories of interest and careers in ag-technology. To do services level up, the headquarter of Rural Development of Administration must be work with local branches to effectively deliver their missions and educational objectives to target crops and farmers group. And farmers were strongly needed "a specialized service team will be organized" to work closely with operating services for ag-products processing, packing and marketing. The recommendations were made by: farmers' needs should be identified and announced by computer networking development to solve their problems faster. Also, provincial and county level service members should have a chance to working at research institute or related work places with their incentives, which system will be easer to meet farmers' needs and deal with their problems so that the systematic approaches should be managed and recorded their educational attendings, education contents and even their farming corporations. Finally, Agricultural Extension Service should be met to general ag-technology literacy and be balanced with knowledge of other industries and be competitive service with better values in non-agricultural sectors.

• 공업화학
• /
• 제18권2호
• /
• pp.126-129
• /
• 2007

원할한 교통망 요구에 따라 도로의 확충이 요구되고, 산악지형이 많은 국토의 특성을 고려할 때 터널이 많이 요구된다. 이러한 터널 공사에서 많은 오염 물질은 천공, 발파, 버럭처리 숏크리트 과정에서 발생되었다. 특히 급기 팬만을 가동 할 경우 분진과 같은 오염물질은 발파 후 4 h이 지나도록 $5000{\mu}g/m^3$ 이상을 나타내었으며, 발파 직후에는 높은 분진 농도로 인하여 30 min 이상 작업을 중단할 수밖에 없었다. 또한 건식 집진기를 가동 할 경우에도 일정 시간 까지는 분진의 제거는 가능하였으나 발파 후 3 h이 지나면 집진 효율이 없는 것으로 나타났다. 본 논문 에서는 분진입자들의 거동과 분진제거장치의 사용에 대해 중점적으로 연구하였다. 또한 건식집진기와 습식집진기의 사용에 있어 각각에 대한 집진제거효율을 비교검토하는 것이 매우 중요하다 결론을 얻었다.

• 여성건강간호학회지
• /
• 제21권4호
• /
• pp.297-307
• /
• 2015

Purpose: This study was aimed to understand the meaning and essentials of the experience of burnout for hospital nurses with turnover intention. Methods: The design was a qualitative research of phenomenological study. Participants: Seven hospital nurses who had worked over three years and had experiences of turnover intention in a hospital with over 400 beds were included. Results: Nine meaningful themes related to burnout experiences and four theme clusters of 1) battery warning sounds almost out; 2) the player who hit the drum and double-headed drum; 3) the target flying arrow without a break; and 4) the pendulum swaying to turn over. Registered nurses (RNs) felt burnout with an overload of work and by the thought that it was illegal action for registered nurses to receive insufficient rewards for their work. RNs also experienced there were no problem solving strategies to verbal violence by patient and medical team. Conclusion: The findings show that burnout experiences for those who had turnover intention was developed from the insight that insufficient training to do work independently with over-load for nurses was not ethical. It suggests that it is necessary to rethink training systems for nursing and hospitals to relieve turnover intention.

• Journal of Hospice and Palliative Care
• /
• 제15권1호
• /
• pp.36-39
• /
• 2012

목적: 암환자는 질병에 대한 정보나 조언뿐 아니라 정서적, 재정적, 실질적인 지지를 필요로 한다. 본 연구에서는 한국과 호주의 암환자를 위한 사회 돌봄 서비스 제공에 대한 기회와 장애를 살펴보고자 한다. 방법: 한국과 호주의 사회복지사들을 대상으로 이메일을 통해 설문하였으며, Braun과 Clarke의 주제분석방법을 통해 분석하였다. 결과: 양국 모두에서 암환자를 위한 다양한 사회 돌봄 서비스가 제공되고 있었다. 하지만, 한국의 경우는 사회 돌봄에 대한 인식 수준을 우선 높여야 하며, 호주는 보다 개별화된 사회 돌봄 서비스의 제공이 필요했다. 결론: 본 연구결과는 현 상태를 파악하고 약점을 보완하게 함으로써, 궁극적으로 한국과 호주 양국에서 암환자를 위한 사회 돌봄 서비스 개선에 도움이 될 것이다.