• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.4
• /
• pp.41-53
• /
• 2002

Role Based Access Control (RBAC), which is a method, using role as an access control, has been popular with users and it is recognized as an effective method to replace the Discretionary Access Control and the Mandatory Access Control However, the existing Role Based Access Control Models have only been limited to the bureaucracy organization in which a distinctive hierarchy system was used, incorporating a stable structure and a standardized work system. Only in some parts, some access control models have been used, which supports 'Team' concept, such as Team Based Access Control Model. However, it did not incorporate the characteristics of the adhocracy organization, which is similar to the company's task force team, whose characteristics are organic, temporary, no standardized operation procedures, and many frequent changes. In this study, we have discussed the characteristics of the adhocracy organization which is different from the existing bureaucracy organization, and we have also discussed the problems related to when the existing access control models are used as the access control model for the adhocracy organization due to its characteristics. In addition, based on the problems, we have suggested an improved role based access control model for the adhocracy organization, and have come up with the solutions when any problems occur in the access control system.

• Journal of Pharmacopuncture
• /
• v.25 no.3
• /
• pp.242-249
• /
• 2022

Objectives: The aim of this work is to evaluate the in vitro antioxidant, hypoglycemic, and antiobesity effects of Euphorbia resinifera extracts and investigate the phenolic constituents and the toxicity of these extracts. Methods: Phytochemical screening was performed to detect polyphenols and flavonoids. Antioxidant activity was evaluated by four methods (DPPH, ABTS, H₂O₂, and xanthine oxidase inhibition). The hypoglycemic effect was determined by the inhibition of α-amylase and α-glucosidase enzymes in vitro and via a starch tolerance study in normal rats. The antiobesity effect was estimated by in vitro inhibition of lipase. Results: Phytochemical screening revealed that the ethanolic extract was rich in polyphenols (99 ± 0.56 mg GEA/g extract) and tannins (55.22 ± 0.17 mg RE/g extract). Moreover, this extract showed higher antioxidant activity in different tests: the DPPH assay (IC₅₀ = 53.81 ± 1.83 ㎍/mL), ABTS assay (111.4 ± 2.64 mg TE/g extract), H₂O₂ (IC₅₀ = 98.15 ± 0.68 ㎍/mL), and xanthine oxidase (IC₅₀ = 10.26 ± 0.6 ㎍/mL). With respect to hypoglycemic effect, the aqueous and ethanolic extracts showed IC₅₀ values of 119.7 ± 2.15 ㎍/mL and 102 ± 3.63 ㎍/mL for α-amylase and 121.4 ± 1.88 and 56.6 ± 1.12 ㎍/mL for α-glucosidase, respectively, and the extracts lowered blood glucose levels in normal starch-loaded rats. Additionally, lipase inhibition was observed with aqueous (IC₅₀ = 25.3 ± 1.53 ㎍/mL) and ethanolic (IC₅₀ = 13.7 ± 3.03 ㎍/mL) extracts. Conclusion: These findings show the antioxidant, hypoglycemic, and hyperlipidemic effects of E. resinifera extracts, which should be investigated further to validate their medicinal uses and their pharmaceutical applications.

• Journal of the Korean Society of Safety
• /
• v.35 no.3
• /
• pp.58-63
• /
• 2020

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.36-44
• /
• 2015

Objectives: This study aimed to elucidate the physicochemical properties of silica powder and airborne particles as by-products generated from fabrication processes to reduce unknown risk factors in the semiconductor manufacturing work environment. Materials and Methods: Sampling was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. Thirty-two powder and airborne by-product samples, diffusion(10), chemical vapor deposition(10), chemical mechanical polishing(5), clean(5), etch process(2), were collected from inner chamber parts from process and 1st scrubber equipment during maintenance and process operation. The chemical composition, size, shape, and crystal structure of silica by-product particles were determined by using scanning electron microscopy and transmission electron microscopy techniques equipped with energy dispersive spectroscopy, and x-ray diffractometry. Results: All powder and airborne particle samples were composed of oxygen(O) and silicon(Si), which means silica particle. The by-product particles were nearly spherical $SiO_2$ and the particle size ranged 25 nm to $50{\mu}m$, and most of the particles were usually agglomerated within a particle size range from approximately 25 nm to 500 nm. In addition, the crystal structure of the silica powder particles was found to be an amorphous silica. Conclusions: The silica by-product particles generated from the semiconductor manufacturing processes are amorphous $SiO_2$, which is considered a less toxic form. These results should provide useful information for alternative strategies to improve the work environment and workers' health.

• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.202-209
• /
• 2017

A cold-work tool steel powder is used to fabricate 3-dimensional objects by selective laser melting using a high-pressure gas atomization process. The spherical powder particles form continuous carbide networks among the austenite matrix and its decomposition products. The carbides comprise Nb-rich MC and Mo-rich $M_2C$. In the SLM process, the process parameters such as the laser power (90 W), layer thickness ($25{\mu}m$), and hatch spacing ($80{\mu}m$) are kept fixed, while the scan speed is changed from 50 mm/s to 4000 mm/s. At a low scan speed of 50 mm/s, spherical cavities develop due to over melting, while they are substantially reduced on increasing the speed to 2000 mm/s. The carbide network spacing decreases with increasing speed. At an excessively high speed of 4000 mm/s, long and irregularly shaped cavities are developed due to incomplete melting. The influence of the scan pattern is examined, for which $1{\times}1 mm^2$ blocks constituting a processing layer are irradiated in a random sequence. This island-type pattern exhibits the same effect as that of a low scan speed. Post processing of an object using hot isostatic pressing leads to a great reduction in the porosity but causes coarsening of the microstructure.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.458-465
• /
• 2013

Ship design engineering refers to the development and design of shipbuilding architectures in a drawing which reflects all relevant manufacturing processes. This paper provides analysis methods for model-information interfaces between hull structure design and outfitting design, and a technical application for manufacturing phases reflecting the pipe support pad and angle item automatically. The existing information procedure of pipe support pad and angle system processes information using drawing without model specification. Outfitting design team directly distributes drawings to the shop floor then manual-based marking and installation work are conducted refer to the distributed drawings. As a result, this process has become time consuming and causes problems in the productivity and quality improvement due to the rework caused by omitted or incorrect marking. The pipe support pad and angle marking is a method that automatically updates model information to hull structure design using sets of data that analyse the generated model in outfitting design processes. Therefore, this approach provides an efficient solution through design references without manual activities such as a reflection of hull structure design, cutting process, numerical control work, and dimension measurement and marking. The conversion of a method from the existing procedure based on manual marking to the reflective and automatic approach would have enabled to proceed installation work without manual activities for the measurement. Therefore, this research study proposes an efficient approach using pre-data analysis of model information interfaces between design and manufacturing phases to improve productivity during construction for shipbuilding.

• Journal of Agricultural Extension & Community Development
• /
• v.19 no.1
• /
• pp.1-28
• /
• 2012

The Extension Program accountability will continue to be an influential force to develop agriculture and rural area. As we incorporate new approaches into our service program and respond to new domains of knowledge, we must also consider how our assessment strategies may need to change in order to meet local and other external standards. The main purpose of the study was to be what the best way of Extension Service is set farmers' educational needs met and to be what kind of methodologies and role of Extension system should provide for their faced problem solving effectively. The major results of the study on Farmers' needs toward Korean Extension Services are summarized as follows. First, it is observed that, when the farmers' perceptions were analyzed, the most ranked by the farmers' needs was "having nice extension workers to get advice and solve their problems on the farm in all at once." Farmers had especially more positive attitudes in the categories of interest and careers in ag-technology. To do services level up, the headquarter of Rural Development of Administration must be work with local branches to effectively deliver their missions and educational objectives to target crops and farmers group. And farmers were strongly needed "a specialized service team will be organized" to work closely with operating services for ag-products processing, packing and marketing. The recommendations were made by: farmers' needs should be identified and announced by computer networking development to solve their problems faster. Also, provincial and county level service members should have a chance to working at research institute or related work places with their incentives, which system will be easer to meet farmers' needs and deal with their problems so that the systematic approaches should be managed and recorded their educational attendings, education contents and even their farming corporations. Finally, Agricultural Extension Service should be met to general ag-technology literacy and be balanced with knowledge of other industries and be competitive service with better values in non-agricultural sectors.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.126-129
• /
• 2007

In order to ruduce traffic-jam, it is requested to extend road. As a result, the construction of tunnels is inevitable considering our mountatinous topography. In tunnel construction work, major contamination materials occur from rock drilling, blasting rock, rock transporting, and short-creat. After rock blasting, a very high concentration of particles over $5000{\mu}g/m^3$ is maintained for 4 h when air is supplied by pans, by which the construction work has to be delayed at least 30 min. Although dry dust collectors are used, the effective operation time span is limited to 3 h. In this work, the behavior of particles in air and use of particle removal instruments are investigated. As a result, it was important to compare efficiencies of dry and hydro dust collectors.

• Women's Health Nursing
• /
• v.21 no.4
• /
• pp.297-307
• /
• 2015

Purpose: This study was aimed to understand the meaning and essentials of the experience of burnout for hospital nurses with turnover intention. Methods: The design was a qualitative research of phenomenological study. Participants: Seven hospital nurses who had worked over three years and had experiences of turnover intention in a hospital with over 400 beds were included. Results: Nine meaningful themes related to burnout experiences and four theme clusters of 1) battery warning sounds almost out; 2) the player who hit the drum and double-headed drum; 3) the target flying arrow without a break; and 4) the pendulum swaying to turn over. Registered nurses (RNs) felt burnout with an overload of work and by the thought that it was illegal action for registered nurses to receive insufficient rewards for their work. RNs also experienced there were no problem solving strategies to verbal violence by patient and medical team. Conclusion: The findings show that burnout experiences for those who had turnover intention was developed from the insight that insufficient training to do work independently with over-load for nurses was not ethical. It suggests that it is necessary to rethink training systems for nursing and hospitals to relieve turnover intention.

• Journal of Hospice and Palliative Care
• /
• v.15 no.1
• /
• pp.36-39
• /
• 2012

Purpose: Cancer patients require emotional, financial and practical support as well as information/advice regarding their illness. This study aims to explore opportunities and barriers for the provision of the social support services in Australia and Korea. Methods: The survey was carried out by an email questionnaire for social workers in Australia and Korea, and collected data were analyzed using a thematic analysis by Braun and Clarke. Results: In Australia and Korea, various types of social support were available for cancer patients. However, social support for cancer patients should be better understood first in Korea, and more personalized support is needed in Australia. Conclusion: These findings will ultimately help to improve social support services for cancer patients in Korea an Australia, through grasping the current state and making up for the weak points.