• Proceedings of the Microbiological Society of Korea Conference
• /
• 1998.04a
• /
• pp.62.2-62.2
• /
• 1998

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.3
• /
• pp.1-6
• /
• 1998

Elementally Chlorine Free (ECF) bleaching will be superior than Totally Chlorine free (TCF) bleaching, not only because they have no significant difference in effluent toxicity, but also those pulps bleached by ECF have higher brightness, strength, yield, etc., over those by TCF. With this belief, this paper focused on the chemistry of chlorine dioxide decomposition and ionization, both in water solution and in pulp slurry. Special attention was paid to chlorate ion because there have been controversies as how it is formed and what its behavior to the end pH of pulp bleaching is. As a result, during ionization of chlorine dioxide with water, both chlorate and chlorite were found to increase with increasing pH, but during ionization with pulp, chlorite was found to increase with end pH while chlorate decreased with increasing end pH. In the case of ionization with water, the disproportion equation $2CIO_2 + OH^{-} \lightarrow H_2O + CIO_3^{-} + CIO_2^{-}$ was thought to become the main reaction with the increasing pH, while in the case of ionization with pulp, the reaction $HCIO + CIO_2^{-}\lightarow H^{+} + Cl^{-} + CIO_3^{-}$ was the main reaction contributing to the formation of chlorate. Based on this above opinion, the contrary results of chlorine dioxide ionization from different researchers were discussed and explained.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.12
• /
• pp.781-785
• /
• 2016

With trend of the miniaturization and the high-functionalizing of mobile communication system, low-loss microwave dielectric materials are widely used for high frequency communication components. These dielectric materials should be co-sintered with highly electric-conducting metal such as silver or copper for high-frequency and thick film process application. Sintering temperature of $Ca(Li_{1/3}Nd_{2/3})_{0.2}Ti_{0.8}]O_{3-{\delta}}$, which has excellent dielectric properties such as ${\varepsilon}_r$ above 40, quality factor ($Q{\cdot}f_0$) above 16,000 GHz, and TCF (temperature coefficient of resonant frequency) of $-20{\sim}-10ppm/^{\circ}C$, is reported as high as $1,175^{\circ}C$, so it could not be co-sintered with silver or copper. Therefore in this study, low-temperature melting glasses of Zn-B-O and Zn-B-Si-O systems were added to $Ca[(Li_{1/3}Nb_{2/3})_{0.8}Ti_{0.2}]O_{3-{\delta}}$ to lower its sintering temperature under $900^{\circ}C$ without losing excellency of dielectric properties. With 15 weight % of Zn-B-Si-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.11g/cm^3$, ${\varepsilon}_r$ of 40.1, $Q{\cdot}f_0$ of 4,869 GHz, and TCF of $-5.9ppm/^{\circ}C$. With 15 weight % of Zn-B-O glass and sintered at $875^{\circ}C$, specimen showed density of $4.14g/cm^3$, ${\varepsilon}_r$ of 40.4, $Q{\cdot}f_0$ of 7,059 GHz, and TCF of $-0.92ppm/^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.130-130
• /
• 2009

This paper describes the temperature characteristics of polycrystalline 3C-SiC micro resonators. The 1.2 ${\mu}m$ and 0.4 ${\mu}m$ thick polycrystalline 3C-SiC cantilever and doubly clamped beam resonators with 60 ~ 100 ${\mu}m$ lengths were fabricated using a surface micromachining technique. Polycrystalline 3C-SiC micro resonators were actuated by piezoelectric element and their fundamental resonance was measured by a laser vibrometer in vacuum at temperature range of $25{\sim}200^{\circ}C$. The TCF(Temperature Coefficient of Frequency) of 60, 80 and 100 ${\mu}m$ long cantilever resonators were -9.79, -7.72 and -8.0 $ppm/^{\circ}C$. On the other hand, TCF of 60, 80 and 100 ${\mu}m$ long doubly clamped beam resonators were -15.74, -12.55 and -8.35 $ppm/^{\circ}C$. Therefore, polycrystalline 3C-SiC resonators are suitable with RF MEMS devices and bio/chemical sensor applications in harsh environments.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.4
• /
• pp.314-317
• /
• 2009

This paper describes the temperature characteristics of polycrystalline 3C-SiC micro resonators. The $1.2{\mu}m$ and $0.4{\mu}m$ thick polycrystalline 3C-SiC cantilever and doubly clamped beam resonators with $60{\sim}100{\mu}m$ lengths were fabricated using a surface micromachining technique. Polycrystalline 3C-SiC micro resonators were actuated by piezoelectric element and their fundamental resonance was measured by a laser vibrometer in vacuum at temperature range of $25{\sim}200^{\circ}C$. The TCF(Temperature Coefficient of Frequency) of 60, 80 and 100 On long cantilever resonators were -9.79, -7.72 and -8.0 ppm/$^{\circ}C$. On the other hand, TCF of 60, 80 and $100{\mu}m$ long doubly clamped beam resonators were -15.74, -12.55 and -8.35 ppm/$^{\circ}C$. Therefore, polycrystalline 3C-SiC resonators are suitable with RF MEMS devices and bio/chemical sensor applications in harsh environments.

• Journal of the Korean Ceramic Society
• /
• v.48 no.3
• /
• pp.257-262
• /
• 2011

Dependencies of dielectric properties on $MgTa_2O_6$, $MgNb_2O_6$, and $MgWO_4$ (Mg-based ceramics) fillers of the polystyrene (PS) matrix composites were investigated as a function of frequency. With increasing frequency from 1 GHz to 7.3 GHz, the dielectric constant (K) of the composites was not changed significantly, while the dielectric loss (tan${\delta}$) of the composites was slightly decreased. The K, tan${\delta}$, and temperature coefficient of resonant frequency (TCF) of the composites were dependent on the type and amount of ceramics at 11 GHz. Also, several theoretical models have been employed to predict the effective dielectric constant of the composites and the results were compared with experimental data. Typically, a K value of 6.67, tan${\delta}$ of $0.56{\times}10^{-3}$, and TCF of -4.99 $ppm/^{\circ}C$ were obtained for the PS composites with 0.4 volume fraction of $MgNb_2O_6$ at 11 GHz.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.78-85
• /
• 2000

Due to environmental proessures there is increasing use of hydrogen peroxide as a total or partial substitute for chlorine based bleaching agents within ECF or TCF sequences. However, to aceive satifactory brightness using peroxide alone, stages having a combination of high temperature, pressure, pH or residence time are required. It may also have negative impact on fiber quality . Therefore, it would be of advantage if vertain means could be found to make hydrogen peroxide more effective in bleacing , via shortening treaction time and allevaiating the need for such forcing reaction conditions. This can be achieve by converting the peroxide in-situ to stronger oxidant through the use of 손 bleach activator. In this study to investigate the influence of additives, such as tetraacetylethylenediamine (TAED) and Molybdate (MO) . addition on peroxide bleaching were carried out. Under alkaline conditions the bleching additives. TAED and Mo. can react H2O2 to form peracetic acid and peroxomolybdate respectively and these generated activators can improve deliginification,. The activators make it possible to bleach the pulp efficiently at low temperature in the range 50 to 7$0^{\circ}C$. Also, addition of TAED and Mo is an environmentally friendly way of enhancing the performance of peroxide bleaching can be incorporated into TCF and ECF sequences.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup1
• /
• pp.1-9
• /
• 2016

In Vietnam, the WHO Framework Convention on Tobacco Control (WHO FCTC) took effect in March 2005 while MPOWER has been implemented since 2008. This paper describes the progress and challenges of implementation of the MPOWER package in Vietnam. We can report that, in term of monitoring, Vietnam is very active in the Global Tobacco Surveillance System, completing two rounds of the Global Adult Tobacco Survey (GATS) and three rounds of the Global Youth Tobacco Survey (GYTS). To protect people from tobacco smoke, Vietnam has issued and enforced a law requiring comprehensive smoking bans at workplaces and public places since 2013. Tobacco advertising and promotion are also prohibited with the exception of points of sale displays of tobacco products. Violations come in the form of promotion girls, corporate social responsibility activities from tobacco manufacturers and packages displayed by retail vendors. Vietnam is one of the 77 countries that require pictorial health warnings to be printed on cigarette packages to warn about the danger of tobacco and the warnings have been implemented effectively. Cigarette tax is 70% of factory price which is equal to less than 45% of retail price and much lower than the recommendation of WHO. However, Vietnam is one of the very few countries that require manufacturers and importers to make "compulsory contributions" at 1-2% of the factory price of cigarettes sold in Vietnam for the establishment of a Tobacco Control Fund (TCF). The TCF is being operated well. In 2015, 67 units of 63 provinces/cities, 22 ministries and political-social organizations and 6 hospitals received funding from TCF to implement a wide range of tobacco control activities. Cessation services have been starting with a a toll-free quit-line but need to be further strengthened. In conclusion, Vietnam has constantly put efforts into the tobacco control field with high commitment from the government, scientists and activists. Though several remarkable achievements have been gained, many challenges remain. To overcome those challenges, implementation strategies that take into account the contextual factors and social determinants of tobacco use in Vietnam are needed.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.8-13
• /
• 2010

Needle contamination was investigated using a test rig simulated the knitting points in the knitting machine in relation with the characteristics of knitting yarn such as yarn type and moisture contents. When used open-end yarn compared with combed and carded ring-spun yarns, the needle contamination was significantly increased because of the higher friction between yarn and needle by the fly and other impurities. Also Lower moisture content of the yarns aggravated the needle contamination. In addition knitting yarn breakage was substantially influenced by the higher needle contamination.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.708-712
• /
• 2001

Microwave dielectric properties of $(Pb_{0.2}Ca_{0.8})[(Ca_{1/3}Nb{2/3})_{1-x}Ti_x]O_3$ ceramics were investigated as a function of $Ti^{4+}$ content (0.05$\leq$x$\leq$0.35). A single perovskite phase was obtained from x=0.05 to x=0.15, and $TiO_2$ and $CaNb_2O^6$ were detected as a secondary phase beyond x=0.2. The structure was changed from orthorhombic at x=0.05 to cubic at x=0.35. Dielectric constant(K) was increased with increase of $Ti^{4+}$ content due to increase of rattling effect, and was inversely proportional to the cube of the average radius of B-site cation, however, Qf value was decreased, which was due to the decrease of grain size and the secondary phase. With the increase of $Ti^{4+}$ content, the temperature coefficient of resonant frequency(TCF) was controlled from -27.36 ppm/$^{\circ}C$ value to +18.4 ppm/$^{\circ}C$ value, which was caused by the influence of tolerance factor(t) and the bond valence of B-site. Typically, K of 51.67, Qf of 7268(GHz), TCF of 0 ppm/$^{\circ}C$ were obtained in the $(Pb_{0.2}Ca_{0.8})[(Ca_{1/3}Nb_{2/3})_{0.8}Ti_0.2]O_3$ sintered at 13$50^{\circ}C$ for 3h.