• Journal of Korean Society of Steel Construction
• /
• v.14 no.6
• /
• pp.735-746
• /
• 2002

The task of plastic theory is twofold: first, to set up relationships between stress and strain that adequately describe the observed plastic deformation of metals, and second, to develop techniques for using these relationships in studying of the mechanics of metal forming processes, and the anlaysis and design of structures. One of the major problems in the theory of plasticity is to describe the behavior of work-hardening materials in the plastic range for complex loading histories. This can be achieved by formulating constitutive laws either in the integral or differential forms. To adequately predict the response of steel members during cyclic loading, the hardening rule must account for the features of cyclic stress-strain behavior. Neithe of the basic isotropic and kinematic hardening rules is suitable for describing cyclic streess-strain behavior, although a kinematic hardening rule describes the nearly linear portions of the stabilized hystersis loops. There is also a limited expansion of the yield surface as predicted by the isotropic hardening rule. Strong ground motions or wind gusts affect the complex and nonproportional loading histories in the inelastic behavior of structues rather than the proportional loading. Nonproportional loading is defined as externally applied forces on the structure, with variable ratios during the entire loading history. This also includes the rate of time-dependency of the loads. For nonproportional loading histories, unloading may take place along a chord instead of the radius of the load surface. In such cases, the shape of the stress-strain curve has to be determined experimentally for all non-radial loading conditions. The plasticity models including two surface models ae surveyed based on a yield surface and a bound surface that represent a state of maximum stress. This paper is concerned with the improvement of a plasticity models of the two-surface type for structural steel. This is follwed by an overview of plasticity models on structural steel. Finally the need for further research is identified.

• Journal of Korea Water Resources Association
• /
• v.39 no.6 s.167
• /
• pp.533-544
• /
• 2006

The deposition of solids in combined sewer systems results in a loss of flow capacity that may restrict flow and cause a local flooding and enhanced solids deposition. In order to solve these problems and proper pipe management, estimation of solid loads from sewer and surface in a drainage basin is needed but this task is very difficult and extremely expensive. In this study, generalized procedures for estimating sewer solid loads during dry weather in combined sewer systems and for estimating solid loads on surface in a drainage basin developed by the U. S. Environmental Protection Agency were applied and analyzed in Gunja drainage basin in Korea. As result, the estimated solid loads from sewer and surface are 205.8,759kg/yr and 1,321,993kg/yr respectively, and total solid loads is 1,527,752kg/yr. The estimated solid removal from street cleaning, dredging from pipe system and pumping house is 1,486,636kg/yr. Therefore, the applied methods show resonable results. More reliable estimation can be achieved if long-term measurements and adjustment of estimation equations are carried out, and this estimation methods can be used usefully for the management of combined sewer system with reduction of cost and effort.

• Korean Journal of Cognitive Science
• /
• v.26 no.1
• /
• pp.27-51
• /
• 2015

The present study tested the effect of a top-down influence on recalling the colors of Stroop words. Participants remembered the colors of 1, 2, 3 or 6 Stroop words. After 1 second of a memory delay, they were asked to recall the color of a cued Stroop word by selecting out its corresponding color on a color-wheel stimulus. The correct recall was defined when the participants chose a color that was within ${\pm}45^{\circ}$ from the exact location of Stroop word's color on the color-wheel. Otherwise, the recall was defined as incorrect. The analyses of the frequency distribution of the participants' responses in the error trials showed that the probability of choosing the color-name of the target Stroop word was higher than the probability of other five color-names on the color-wheel. Further analyses showed that increasing the number of Stroop words to manipulate memory load did not affect the probability of the Stroop interference. These results indicate that the top-down interference by Stroop manipulation may induce systematic distortion of the stored representation in visual working memory.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.104-113
• /
• 2005

A variety of ergonomic assessment methods of lifting tasks known as a major cause of work-related lower back pain have been used. But there is a limited information in choosing the most appropriate assessment method for a particular job and in finding out strengths and weakness of the methods. The purpose of this study was to assess and compare the ergonomic risks of lifting tasks in a marine diesel engine production industry by three lifting ergonomic assessment tools widely used: the National Institute for Occupational Safety and Health(NIOSH) Revised Lifting Equation(NLE), the Washington Administrative Code 296-62-0517(WAC), and the Snook Tables. Lifting index(weight of load/Recommended Weight Limit) of NLE($LI_{NLE}$) was above 1 at 34 tasks(75.6%) of a total number of 45 lifting tasks. LI of WAC($LI_{WAC}$) was above 1 at 11 tasks(24.4 %). LI of Snook Table($LI_{Snook}$) was above 1 at 29 tasks(64.4%). Thus, LI was high in orders of $LI_{NLE}$ > $LI_{Snook}$ > $LI_{WAC}$. There were significantly high correlations among three Lls(p<0.01). The correlation coefficients between $LI_{NLE}$and the other three Lls($LI_{WAC}$ and $LI_{Snook}$) were r=0.93 and r=0.88, respectively. The linear regression equations were y = 0.444x + 0.11(r=0.93) between $LI_{NLE}$ and $LI_{WAC}$, y = 0.93x + 0.008(r=0.88) between LI(NLE) and $LI_{Snook}$. The LI values by WAC was significantly lower than those by the other tools. The compared features, strength and limitation among these tools were described in this paper.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.3
• /
• pp.301-310
• /
• 2013

To suggest a standard concerning with the arrangement of bridge equipment, the authors conducted the video observations with 3CCD (charge coupled device) cameras installed on the ceil of the bridge for monitoring the working activities of two bridge teams (the skipper/mate1 and the skipper/mate2) in a Korean coastal large trawler(gross tonnage: 139) for five days from July 30th. 2010 and analyzed of the data. Work elements coded by the work activities were input on the sheet of work analysis by the time unit of 1 sec according to the time occurred. A single work element among the work activities for every 5 minutes was denoted as the number of occurrence. The frequency of equipment usage was limited only in the usage of the equipment. In the case of the navigation and the towing net two ranks were integrated and analyzed. On the other hand, in the case of the casting net and the hauling net, two processes were integrated to as one and then analyzed separately as two ranks. As the results, 15 elements of work was carried out between two bridge teams for the observation; lookout, radar, GPS plotter, fish finder, net monitor, fishing deck, RPM indicator, rudder angle indicator, compass card, for maneuver; steering, ship speed control, trawl winch operation and external communications, paper works and others. It was found that the work load of the skipper per 5 minutes accordance with the navigation, the casting net, the towing net and the hauling net are 20.5 times, 11.9 times, 38.0 times and 9.5 times respectively, the mates are 65.2 times, 66.5 times, 85.7 times and 59.1 times respectively. The radar was shown the highest frequency of the equipment usage and the next was the fish finder, the GPS plotter and the external communications in the case of the navigation. In the case of the towing net the frequency of usage was high the ranking as the radar, the net monitor, the fish finder, the GPS plotter, the steering system and the external communications. In the case of the integrated process both of the casting and hauling net the trawl winch was shown the highest frequency to the skipper and the next was the GPS plotter and the radar, and the steering system was shown the highest frequency to the mate and the next was the radar, the ship speed control system, the GPS plotter, the net monitor and the fish finder.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.545-556
• /
• 2017

Various assessment indexes have been developed and utilized to evaluate the driver workload. However, existing workload assessment indexes do not fully reflect driving habits and driving patterns of individual drivers. In addition, there exists significant differences in the amount of workload experienced by a driver and the ability to overcome the driver's workload. To overcome these limitations associated with existing indexes, this study has developed a novel workload assessment index to reflect an individual driver's driving pattern. An average of the absolute values of the steering velocity for each driver are set as a threshold value in order to reflect the driving patterns of individual drivers. Further, the sum of the areas of the steering velocities exceeding the threshold value, which is defined as erratic steering area (ESA) in this study, was quantified. The developed ESA index is applied in evaluating the driver workload of manually driven vehicles in automated vehicle platooning environments. Driving simulation experiments are conducted to collect drivers' responsive behavior data which are used for exploring the relationship between the NASA-TLX score and the ESA by the correlation analysis. As a result, ESA is found to have the greatest correlation with the NASA-TLX score among the various driver workload evaluation indexes in the lane change scenario, confirming the usefulness of ESA.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.1 s.16
• /
• pp.1-16
• /
• 2006

Recently, human based computing environment for supporting users to concentrate only user task without sensing other changes from users is being progressively researched and developed. But middleware deletes steream data processed for reducing process load of massive information from RFID sensor in this computing. So, this kind of middleware have problems when user demands probability or statistics needed for data warehousing or data mining and when user demands very important stream data repeatedly but already discarded in the middleware every former time. In this paper, we designs Sensor Middleware Architecture on Multi Level Spatial DBMS with Snapshot and manage repeatedly required stream datas to solve reusing problems of historical stream data in current middleware. This system uses disk databse that manages historical stream datas filtered in middleware for requiring services using historical stream information as data mining or data warehousing from user, and uses memory database that mamages highly reuseable data as a snapshot when stream data storaged in disk database has high reuse frequency from user. For the more, this system processes memory database management policy in a cycle to maintain high reusement and rapid service for users. Our paper system solves problems of repeated requirement of stream datas, or a policy decision service using historical stream data of current middleware. Also offers variant and rapid data services maintaining high data reusement of main memory snapshot datas.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.695-703
• /
• 2011

Objective: This study was to investigate the effects of coordinated upper-limb body postures on the subjective discomfort rating, heart rate, and muscle activities. Background: Although generally many checklists such as OWAS, RULA, and REBA were applied to evaluate various body postures, the body postures were might be overestimated or underestimated because each body part(i.e., back, shoulder, and elbow etc.) was evaluated separately, and then added all rates of individual body parts to assess an overall risk level for the body posture in these methodologies. Methods: A total of 20 participants maintained 14 postures which were combinations of back, shoulder, and elbow flexion angles and then muscle activities, subjective discomfort, and heart rates were collected every three minute during a sustained 15 minute and 0.5kg weight holding task. Four muscle groups were investigated: erector spine, anterior deltoid, upper trapezius, triceps brachii. Results: Results showed that subjective discomfort was the lowest when the angle of back and shoulder were both $0^{\circ}s$, while the body posture with $45^{\circ}$ of back angle and $45^{\circ}$ shoulder angle was rated as the most subjective discomfort posture. In general, the subjective discomfort ratings increased as back and shoulder flexion angles increased. It was noted that, however, the subjective discomfort of body posture with a $45^{\circ}$ back angle and $45^{\circ}$ shoulder flexion angle was lower than that of body posture with a $0^{\circ}$ back and $45^{\circ}$ shoulder flexion angle. The research findings of heart rates and muscle activities showed similar results for the analyses of subjective discomfort ratings. Conclusions: The possible limitations of the current ergonomics evaluation techniques which assessing a body posture with summing all body part score after individually analyzed in this study. Based on the analyses of subjective discomfort, heart rate, and muscle activities, it was recommended that a use of effects of coordinated upper-limb body postures would be considered when one evaluates work-load for various working postures. Application: These findings can be used for developing a more accurate assessment checklist for working posture as well as preventing musculoskeletal disorders of workers in workplaces.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.167-176
• /
• 2005

This paper proposes a new power minimization technique for the frame-based multimedia signal processing. The derivation of the technique is based on the newly proposed microscopic DVS(Dynamic Voltage Scaling) method, where, the operating frequency and the supply voltage levels are dynamically controlled according to the processing requirement for each frame of multimedia data. The multimedia signal processing algorithms are also redesigned and optimized to maximize the power saving efficiency of the microscopic DVS technology. The characterization of the mean/variance distribution of the processing load in the frame-based multimedia signal processing provides the major basis not only for the optimized application of the microscopic DVS technology but also for the optimization of the multimedia algorithms. The power saying efficiency of the proposed DVS approach is experimentally tested with the algorithms of MPEG-2 video decoder and MPEG-2 AAC audio encoder on the ARM9 RISC processor. The experimental results with the diverse MPEG-2 video and audio files show The average power saving efficiencies of 50$\%$ and 30$\%$, respectively. The results also agree very well with those of the analytic derivations.

• Journal of Minimally Invasive Surgery
• /
• v.21 no.4
• /
• pp.168-176
• /
• 2018

Purpose: Robotic-associated minimally invasive surgery is a novel method for overcoming some limitations of laparoscopic surgery. This study aimed to evaluate the outcomes (postoperative pain, cosmesis, surgeon's workload) of single-incision robotic cholecystectomy (SIRC) vs. single-incision laparoscopic cholecystectomy (SILC) vs. conventional three-port laparoscopic cholecystectomy (3PLC). Methods: 134 patients who underwent laparoscopic or robotic cholecystectomy at a single center during 2016~2017 were enrolled. Prospectively collected data included demographics, operative outcomes, questionnaire regarding pain and cosmesis, and NASA-Task Load Index (NASA-TLX) scores for surgeon's workload. Results: 55 patients underwent SIRC, 29 SILC, and 50 3PLC during the same period. 3PLC patient group was older than the others (SIRC vs. SILC vs. 3PLC: 48.1 vs. 42.2 vs. 54.1 years, p<0.001). Operative time was shortest with 3PLC (44.1 vs. 38.8 vs. 25.4 min, p<0.001). Estimated blood loss, postoperative complications, and postoperative stay were similar among the groups. Pain control was lowest in the 3PLC group (98.2% vs. 100% vs. 84.0%, p=0.004), however, at 2 weeks postoperatively there were no differences among the groups (p=0.374). Cosmesis scores were also worst after 3PLC (17.5 vs. 18.4 vs. 13.3, p<0.001). NASA-TLX score was highest in the SILC group (21.9 vs. 44.3 vs. 25.2, p<0.001). Conclusion: Although SIRC and SILC take longer than 3PLC, they produce superior cosmetic outcomes. Compared with SILC, SIRC is more ergonomic, lowering the surgeon's workload. Despite of higher cost, SIRC could be an alternative for treating gallbladder disease in selected patients.