• The Journal of KAIRB
• /
• v.2 no.2
• /
• pp.37-48
• /
• 2020

Purpose: The purpose of this study is to assess the operational status and level of understanding among IRB and HRPP staffs at a hospital or a research institute to the HRPP guideline set by the Ministry of Food and Drug Safety (MFDS) and to provide recommendations. Methods: Online survey was distributed among members of Korean Association of IRB (KAIRB) through each IRB office. The result was separated according to topic and descriptive statistics was used for analysis. Result: Survey notification was sent out to 176 institutions and 65 (37.1%) institutions answered the survey by online. Of 65 institutions that answered the survey; 83.1% was hospital, 12.3% was university, 3.1% was medical college, 1.5% was research institution. 23 institutions (25.4%) established independent HRPP offices and 39 institutions (60.0%) did not. 12 institutions (18.5%) had separate IRB and HRPP heads, 21 (32.3%) institutions separated business reporting procedure and person in charge, 12 institutions separated the responsibility of IRB and HRPP among staff, and 45 institutions (69.2%) had audit & non-compliance managers. When asked about the most important basic task for HRPP, 23% answered self-audit. And according to 43.52%, self-audit was also the most by both institutions that operated HRPP and institutions that did not. When basic task performance status was analyzed, on average, the institutions that operated HRPP was 14% higher than institutions that only operated IRB. 9 (13.8%) institutions were evaluated and obtained HRPP accreditation from MFDS and the most common reason for obtaining the accreditation was to be selected as Institution for the education of persons conducting clinical trial (6 institutions). The most common reason for not obtaining HRPP accreditation was because of insufficient staff and limited capacity of the institution (28%). Institutions with and without a plan to be HRPP accredited by MFDS were 20 (37.7%) each. 34 institutions (52.3%) answered HRPP evaluation method and accreditation by MFDS was appropriate while 31 institutions (47.7%) answered otherwise. 36 institutions answered that HRPP evaluation and accreditation by MFDS was credible while 29 institutions (44.5%) answered that HRPP evaluation method and accreditation by MFDS was not credible. Conclusion: 1. MFDS's HRPP accreditation program can facilitate the main objective of HRPP and MFDS's HRPP accreditation program should be encouraged to non-tertiary hospitals by taking small staff size into consideration and issuing accreditation by segregating accreditation. 2. While issuing Institution for the education of persons conducting clinical trial status as a benefit of MFDS's HRPP accreditation program, it can also hinder access to MFDS's HRPP accreditation program. It should also be considered that the non-contact culture during COVID-19 pandemic eliminated time and space limitation for education. 3. For clinical research conducted internally by an institution, internal audit is the most effective and sole method of protecting safety and right of the test subjects and integrity for research in Korea. For this reason, regardless of the size of the institution, an internal audit should be enforced. 4. It is necessary for KAIRB and MFDSto improve HRPP awareness by advocating and educating the concept and necessity of HRPP in clinical research. 5. A new HRPP accreditation system should be setup for all clinical research with human subjects, including Investigational New Drug (IND) application in near future.

• Clinical Pain
• /
• v.19 no.2
• /
• pp.70-79
• /
• 2020

Objective: We evaluated the efficacy of a newly-developed spinal orthoses (V-LSO) by comparing the stabilizing effect, abdominal pressure, and comfort of 3 different semirigid LSOs (classic LSO, V-LSO, and Cybertech^®) during various body movements. Method: Thirty healthy volunteers (23~47 years, 24 males, 6 females) were selected. A dual inclinometer measured the range of motion (ROM) while the participants performed flexion/extension and lateral flexion of the lumbar spine with 3 LSOs. The LSO's pressure on the abdominal surface was measured using 9 pressure sensors while lying, sitting, standing, flexion/extension, lateral flexion, axial rotation, and lifting a box. Comfort and subjective immobilization were analyzed by a questionnaire. Results: V-LSO had a statistically significant effect on flexion over Cybertech^®. No significant differences were noted during extension and lateral flexion between the 3 LSOs. The abdominal pressure showed no significant differences while supine. While sitting, standing, and lifting a box, the mean abdominal pressure for V-LSO were significantly higher than those for Cybertech^®. During lumbar flexion, the mean abdominal pressures for classic LSO and V-LSO were significantly higher than that of Cybertech^®. For extension, lateral flexion and axial rotation, the abdominal pressure for V-LSO was significantly higher than those of classic LSO and Cybertech^®. In the subjective analysis, V-LSO and Cybertech^® scored best for comfort. Conclusion: The V-LSO and Cybertech^® were more comfortable than the classic LSO, and hence, may have improved compliance with decreased discomfort. V-LSO may be superior to the other LSOs in restricting lumbar movement and increasing intraabdominal pressure.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.516-522
• /
• 2017

The purpose of this study was to identify the effect of dental hygienists' perceptions of dental organizational culture and professional identity on organizational commitment. A survey was conducted with 310 dental hygienists working in dental hospitals and dental offices. If dental hygienists experience organizational cultures as having different degrees of organizational commitment, then the type of organizational culture and commitment may be important variables in understanding and reducing the turnover rate of dental hygienists and improving workplace performance. Efforts to form a healthy and positive organizational culture may therefore be necessary. The organizational culture most recognized by the dental hygienist was hierarchical culture (3.39) and the least recognized was task-orientated culture (2.71). The professional identity of the dental hygienist was 3.75 and the organizational commitment was 2.98. Correlation analysis was conducted to investigate the relationship between dental organization culture type, professional dental hygienist identity, and organizational commitment. As a result, professional identity and organizational commitment showed positive(+) correlation with innovation oriented culture and relationship oriented culture. Among the organizational culture types, relationship-orientated culture (p<0.001) and innovation-orientated culture (p=0.006) were significant influences on organizational commitment, and professional identity did not have a significant influence. The regression model was found to be statistically appropriate (F=11.857, p<0.001) and the model explaining power was 14.9%. These results suggest that efforts to create a relationship-orientated culture and an innovation-orientated culture and to reduce the hierarchical culture can be a strategy to enhance the organizational commitment and the professional identity of dental hygienists.

• Research in Community and Public Health Nursing
• /
• v.7 no.1
• /
• pp.52-68
• /
• 1996

As a product of poverty, health means the physical, mental and social instability caused by poverty. High mortality, high morbidity, and unsatisfied needs for medical care indicate the health condition of poor people. These indicators are related to the social and psychological property. This study is to develop an effective method of nursing in the poor family which is an essential unit in the nursing field of the community and to which a fundamental approach is need as a top priority. We can make such a study, though partially, by revealing the relationship among the Health-value, Health Locus of Contol, and the Level of Self esteem. We randomly sampled 243 women who are participating in the nursing department of the comnnity nursing centers in Seoul. We investigated by using questionaries and made an analysis on the result by SAS program. The result of this investigation can summarized as follows : 1. The average age of the subjects investigated is 43.4 and the participation rate in the economic activity is as high as 49.4%. Most of them are paid daily. The average members of the family are 4.28 persons, and 80.2% of which are nuclear families. The type of housing is as follows:51.4% are monthly-rent houses. Rent houses represent 23.5%. And 43.6% of the subjects graduate the high schools 2. The level of self-esteem possessed by the subjects is 37.17. The quality of task performance(3.46) and the morality(3.53) are low as compared with the other qualities. 3. In relation to the locus of control, internality is 22.39, the influence of powerrful others represents 20.24, and the effect of chance occurance is 16.41. 4. The orderings of value scale are the physical and mental health, comfortable life, happiness, mental peace, and pleasure. The lowest order is social recognition. 5. Considering in relation to the self-esteem and the locus of control, we found out that there is a negative relationship among the self-esteem, the influence of powerful others. The lower the level of self-esteem is, the higher the influence of powerful others is. There is also a negative relationship among the detailed items such as the qualities, and the positive attitude. 6. In a significant test in the general characters of the subjects and in the level of self-esteem, we can obtain the follwing results. The higher the economic level is, the higher the level of self-esteem is. And the higher the level of satisfaction with life is, the higher the level of self-esteem is. 7. In the locus of control, the higher the economic level is, the higher the internality is. 8. In the health-level, 75.72% represent the high health -level. And the group which has the low satisfaction with life represents the high level of health-value(81.6%). With these results, we can conclude that the level of self-esteem possessed by the poor women living in the city is high and that they have the multi-dimemsional health-value even though they are living in the poor condtions. Traditionally, the poverty has been recognized as an unfavorale factor in the health care. But this study shows that the poverty is no longer an unfavorale factor and, on the contrary, it has a potential power with which people can improve their health by possessing the high self-esteem and the high health value. The ultimate purpose which the nursing task of the community has is to make the patients keep and improve their own health. So, when the nurses approach the poor patients, the nurses should put an emphasis on the individual responsibilities of the patients, and respect their own health value.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.3
• /
• pp.91-100
• /
• 2023

This study is a case study comparing and examining the effects of non-face-to-face(NFTF) classes in the 2021-2 semester and face-to-face(FTF) classes in the 2022-2 semester on learning immersion, learning stress, and learning satisfaction. The learning immersion and learning satisfaction of 240 students were analyzed in NFTF and FTF classes of department S of C junior college where the same textbook, same subject, and same professor were taught. For data processing, SPSS Ver. 23.0 was used. The data is used to measure reliability by Cronbach's α, t-test, Pearson's correlation coefficient, and multiple regression analysis. The results of this study are as follows. First, learners' learning immersion was higher in FTF than NFTF classes among engineering major subjects. Second, it was found that there was a difference in learning stress according to the types of FTF and NFTF classes in engineering major subjects. Third, it was found that there were differences in practice content, communication, and task performance of sub-factors of learning satisfaction according to FTF and NFTF class types in engineering major subjects. In conclusion, it was found that FTF classes had a more positive effect on learning immersion and satisfaction, and NFTF classes had a more negative effect on learning stress.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.117-128
• /
• 2003

Software usability is a characteristic of the software that is decided based on learnability, effectiveness, and satisfaction when it is evaluated. The usability is a main factor of the software quality. A software has to be continuously improved by taking guidelines that comes from the usability evaluation. Usability factors may vary among the different software products and even for the same factor, the users may have different opinions according to their experience and knowledge. Therefore, a usability evaluation process must be developed with the consideration of many factors like various applications and users. Existing systems such as satisfaction evaluation and performance evaluation only evaluate the result and do not perform cause analysis. And also unified evaluation items and contents do not reflect the characteristics of the products. To address these problems, this paper presents a evaluation model that is based on the mental model of user and the problems, this paper presents a evaluation model that is based on the mental model of user and the emotion of users. This model uses evaluation factors of the user task which are extracted by analyzing usage of the target product. In the mental model approach, the conceptual model of designer and the mental model of the user are compared and the differences are taken as a gap also reported as a part to be improved in the future. In the emotional factor approach, the emotional factors are extracted for the target products and evaluated in terms of the emotional factors. With this proposed method, we can evaluate the software products with customized attributes of the products and deduce the guidelines for the future improvements. We also takes the GUI framework as a sample case and extracts the directions for improvement. As this model analyzes tasks of users and uses evaluation factors for each task, it is capable of not only reflecting the characteristics of the product, but exactly identifying the items that should be modified and improved.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.3
• /
• pp.21-29
• /
• 2016

Cell segmentation is an important but time-consuming and laborious task in biological image analysis. An automated, robust, and fast method is required to overcome such burdensome processes. These needs are, however, challenging due to various cell shapes, intensity, and incomplete boundaries. A precise cell segmentation will allow to making a pathological diagnosis of tissue samples. A vast body of literature exists on cell segmentation in microscopy images [1]. The majority of existing work is based on input images and predefined feature models only - for example, using a deformable model to extract edge boundaries in the image. Only a handful of recent methods employ data-driven approaches, such as supervised learning. In this paper, we propose a novel data-driven cell segmentation algorithm for bright-field microscopy images. The proposed method minimizes an energy formula defined by two dictionaries - one is for input images and the other is for their manual segmentation results - and a common sparse code, which aims to find the pixel-level classification by deploying the learned dictionaries on new images. In contrast to deformable models, we do not need to know a prior knowledge of objects. We also employed convolutional sparse coding and Alternating Direction of Multiplier Method (ADMM) for fast dictionary learning and energy minimization. Unlike an existing method [1], our method trains both dictionaries concurrently, and is implemented using the GPU device for faster performance.

• The Journal of Society for e-Business Studies
• /
• v.24 no.1
• /
• pp.29-48
• /
• 2019

Recently, product design innovation to improve user experience has been perceived as a core element of enterprise competitiveness due to the fierce market competition and decrease of the technological gap between companies, but there is insufficient services to support the product experience evaluation of small and medium-sized companies (SMCs). The aim of this study is to develop a web-based product user experience evaluation and certification system supporting product design practices for SMCs. For system interface design, we conducted systematic functional requirement elicitation methods such as user survey, workflow analysis, user task definition, and function definition. Then main functions, information structure, navigation method, and detailed graphic user interfaces were developed with consideration of user interactions and requirements. In particular, it provides the databases for evaluation efficiency to support the evaluation process above a certain level of performance and efficiency, and knowledge databases to utilize in the evaluation and product design improvement. With help of the developed service platform, It is expected that the service platform would enhance SMCs' product development capability with regard to the user experience evaluation by connecting the consulting firms with SMCs.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.445-471
• /
• 2023

Long-term safety over millennia is the top priority consideration in the construction of disposal sites. However, ensuring the mechanical stability of deep geological repositories for spent fuel, a.k.a. radwaste, disposal during construction and operation is also crucial for safe operation of the repository. Imposing restrictions or limitations on tunnel support and lining materials such as shotcrete, concrete, grouting, which might compromise the sealing performance of backfill and buffer materials which are essential elements for the long-term safety of disposal sites, presents a highly challenging task for rock engineers and tunnelling experts. In this study, as part of an extensive exploration to aid in the proper selection of disposal sites, the anticipation of constructing a deep geological repository at a depth of 500 meters in an unknown state has been carried out. Through a review of 2D and 3D numerical analyses, the study aimed to explore the range of properties that ensure stability. Preliminary findings identified the potential range of rock properties that secure the stability of central and disposal tunnels, while the stability of the vertical tunnel network was confirmed through 3D analysis, outlining fundamental rock conditions necessary for the construction of disposal sites.

• Progress in Medical Physics
• /
• v.19 no.3
• /
• pp.164-171
• /
• 2008

One of the most important task in commissioning intensity modulated radiotherapy (IMRT) into a clinic is the characterization of dosimetry performance under small monitor unit delivery conditions. In this study, method of evaluating dose monitor linearity, beam flatness and symmetry, and MLC positioning accuracy using a diode array is investigated. Siemens Primus linear accelerator (LA) with 6 and 10 MV x-rays was used to deliver radiation and the characteristics were measured using a multi array diodes. Monitor unit stabilities were measured for both x-ray energies. The dose linearity errors for the 6 MV x-ray were 2.1, 3.4, 6.9, 8.6, and 15.4 % when 20 MU, 10 MU, 5 MU, 4 MU, and 2 MU was delivered, respectively. Greater errors were observed for 10 MV x-rays with a maximum of 22% when 2 MU was delivered. These errors were corrected by adjusting D1_C0 values and reduced to less than 2% in all cases. The beam flatness and symmetry were appropriate without any correction. The picket fence test performed using diode array and film measurement showed similar results. The use of diode array is a convenient method in characterizing beam stability, symmetry and flatness, and positioning accuracy of MLC for IMRT commissioning. In addition, adjustment of D1-C0 value must be performed when a Siemens LA is used for IMRT because factory value usually gives unacceptable beam stability error when the MU/segment is smaller than 20.