• Journal of the Korean Professional Engineers Association
• /
• v.30 no.6
• /
• pp.113-120
• /
• 1997

This subject,'S" apartment structural frame has not been achieved without considerable effort by all quality controller involved. Therefore, it is appropriate at this time to report by all the fact of concrete quality control in our site. These are emphasized that the average strength of placed concrete must always exceed the specified value of design strength used in the structural design phase. In general, quality of ready mixed concrete largely depends not only upon the manner of production and proper observance of recognized methods of placement, finishing, curing, transportation etc. ,but also many kinds of influential factors even more handling of the test procedure, As this practical report, approaching to judgement by analysis of sampled specimens in site weather placed concrete have satisfied quality compare the specified strength with the target strength which is applied to standard deviation related with influential factors as above mentioned. This case study is consist of 1) A foreword, 2) Site brief, 3) A precondition for analysis, 4) A formulas derivation and quality analysis, 5) Economic gains by the coefRcient of increase and 6) A conclusion.sion.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.259-262
• /
• 2013

Multi-site testing is considered as a solution to reduce test costs. This paper presents a new channel sharing architecture that enables I/O pins to share automatic test equipment (ATE) channels using simple circuitry such as tri-state buffers, AND gates, and multiple-input signature registers (MISR). The main advantage of the proposed architecture is that it is implemented on probe cards and does not require any additional circuitry on a target device under test (DUT). In addition, the proposed architecture can perform DC parametric testing of the DUT such as leakage testing, even if the different DUTs share the same ATE channels. The simulation results show that the proposed architecture is very efficient and is applicable to both wafer testing and package testing.

• Korean Journal of Community Nutrition
• /
• v.15 no.1
• /
• pp.36-49
• /
• 2010

This study was carried out to reduce children's sugar, natrium and fat intakes and establish their healthy lifestyle. To achieve these goals, we developed an educational web site and an e-learning system. The targets of this web site are children, parents and educators. This site has various information about sugar, natrium and fat, and has special menus for each target: such as the 'Let's study' for children, 'Guides for child's eating' for parents, and 'Educational softwares, Lesson plans/materials, and Textbooks/Teaching guides' for educators. We developed three nutrient characters and applied them to the web site. We provided information in the form of texts, images, flash and sounds. This site has special boards in 'Nutrition cafe' menu to interchange information or their successful stories between the connecters. We developed an e-learning system with two courses. One is for junior elementary students and the other is for senior students. Children can study each nutrient step by step in a course according to their academic ability and concern. Also, they can evaluate their academic achievement in this system, which was uploaded into 'Let's study' in children menu in the web site. Conclusively this web site and e-learning system could contribute to reducing children's sugar, natrium and fat intakes by helping children study them systematically and effectively by on-line system. We expect this e-learning system would be a new nutrition education system to make nutrition education more active.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.2
• /
• pp.313-320
• /
• 2015

While various phishing attacks are getting to be increased in constant, their response methods still stay on the stage of responding after identifying an attack. To detect a phishing site ahead of an attack, a method has been suggested with utilizing the Referer header field of HTTP. However, it has a limitation to implement a traffic gathering system for each of prospective target hosts. This paper presents a unknown phishing site detection method in the Interior network environment. Whenever a user try to connect a phishing site, its traffic is pre-processed with considering of the characteristics of HTTP protocol and phishing site. The phishing site detection phase detects a suspicious site under phishing with analysing HTTP content. To validate the proposed method, some evaluations were conducted with 100 phishing URLs along with 100 normal URLs. The experimental results show that our method achieves higher phishing site detection rate than that of existing detection methods, as 66% detection rate for the phishing URLs, and 0% false negative rate for the normal URLs.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.767-778
• /
• 2006

This study was carried out to evaluate the temporal variations of VOCs at an urban site, and to compare the concentrations of VOCs at an urban site in Daegu with those at a suburban site in Gyeongsan. Three hourly VOC samples in the ambient air were collected using a sequential tube sampler (STS 25, Perkin Elmer) throughout two weeks during May and July representing spring and summer seasons, respectively. The VOC concentrations were determined by an automatic thermal desorption apparatus with GC/MS analysis. A total of 12 VOCs of environmental concern were determined, which are chloroform, benzene, trichloroethylene, toluene, tetra-chloroethylene, ethylbenzene, m+p-xylenes, o-xylene, styrene, 1,3,5- and 1,2,4-trimethylbenzenes. Among 12 target VOCs, the most abundant compound appeared to be toluene, being followed by xylenes. The mean concentrations at the urbn site were 1.2 pub for benzene and 20.4 ppb for toluene (n=221) while the mean levels at the suburban site were 0.9 ppb and 4.3 ppb for benzene and toluene (n=96), respectively. The urban site concentrations were typically several-fold higher than those measured at the suburban site. It was found that general trends of VOC levels were significantly dependent on traffic conditions at the sampling site since VOC concentrations were at their maximum during rush hours, i.e. $9{\sim}12a.m$ and $6{\sim}9p.m$. Statistical investigations were conducted to investigate any significant relationships between VOC concentrations and affecting factors. Calculated correlation coefficients among VOCs were positively significant at a level of 0.05 in most cases. Increased concentrations of toluene in the urban site were estimated to reflect the effect of large industrial sources, mainly from textile industry.

• Journal of Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.105-112
• /
• 2001

Insect pests can be controlled through direct application of insecticides. Insect control by residual protectants is relatively inexpensive and has an advantage of destroying all stages of infestations. The efficacy of control is largely determined by the concentration of insecticides to which the pest species is exposed. A reduction in the period of control in the field afforded by a specific level of a protectant indicates that resistance has developed. An increase in the level of protectant is required to maintain control, and the efficacy of currently used insecticides has been severely reduced by insecticide resistance in pest species. Development of resistance to particular insecticide varies with species because insecticide resistance is often correlated with increased levels of certain enzymes, which are cytochrome P450-dependent monooxygenases, glutathione S-transferases and esterases. Some sections of insecticide molecules can be modified by one or more of these primary enzymes. A reduction in the sensitivity of the action site of a xenobiotic also constitutes a mechanism of resistance. Acetylcholinesterase is a major target site for insecticide action, as are axonal sodium ion channels and ${\gamma}$-aminobutyric acid receptors. Development of reduced sensitivity of these target sites to insecticides usually occurs. This review not only may contribute to a better understanding of insecticide resistance, but also illustrates the gaps still present for a full biochemical understanding of the resistance.

• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.175-182
• /
• 2018

We analyze geological, petrophysical and geomechanical characteristics of a $CO_2$ sequestration test site, Pohang. The target reservoir exists at a depth of 750 m, where porous and permeable sandstones/conglomerates prevail. The reservoir is underlain by thick mudstone formations. We estimate in situ stress conditions using an exploratory wellbore drilled through the target reservoir. The in situ stress condition is characterized by a strike-slip faulting favored stress regime. We discuss various aspects of reservoir fracture pressures and fault reactivation pressures based on the stress magnitudes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.3
• /
• pp.37-49
• /
• 2007

This study investigated how external environmentally-friendly factors adopted to improve the quality of outdoor spaces have been designed and used in the construction of apartment complexes. The goal of this study is to determine what areas should be improved through environmentally-friendly ways to create natural outdoor spaces in apartment complexes and enhance their availability and usefulness. For this study, 21 environmentally-friendly factors were chosen and a checklist by specific item was prepared. This study examine how these items were applied to basic planning, detail design, and construction in 4 target areas. As a result, it was found that the development of environmentally-friendly residential areas was an ultimate goal of the project during basic planning and design. All target areas focused on developing an inner greens network, eco-pond, brook, and pedestrian track as well as the growth of a variety of plants. Some differences have been observed, however, in terms of method. Furthermore, due to economic and technological problems and poor construction site conditions, green walls/green roofs/pedestrian tracks/use of rainwater have not been properly promoted. These kinds of problems must be improved through the development of environmentally-friendly construction methods and materials, the expansion of natural grounds areas, economic support, a satisfactory repair and maintenance system.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.3
• /
• pp.10-16
• /
• 2013

The annual expenditure on diesel oil and heavy oil in the construction sector is the second largest among all industrial sectors. According to the greenhouse reduction scheme of Korean Government, construction sector targeted 7.1% reduction by 2020. Although this target is not higher than other industrial sectors, it is not easy to achieve the reduction target without radical advance in technology, which cannot be expected to happen soon, considering the conservative characteristics of construction industry. Most researches on environmental issues focus on the issues related to energy saving matters during material production stage or maintenance stage, such as heating and insulation, and few deal with the issues directly related to the energy use in the construction sites. This research regards the operation of equipment for the on-site construction processes as a system and attempts to model the energy use processes related to the activities in construction sites, and provides simulation results of earth excavation and hauling processes. The result of this research is expected to aid construction planners estimating the time-based patterns of energy use and assessing greenhouse gas emission and to help selecting more energy efficient alternatives at the planning stage.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.63-63
• /
• 2003

$\alpha$$_1$-Antityrpsin is a member of the serine protease inhibitor (SERPIN) family that shares a common tertiary structure. The reactive site loop (RSL) of serpins is exposed at one end of the molecule for protease binding. Upon cleavage by a target protease, the RSL is inserted into the major $\beta$-sheet A, which is a necessary process for formation of a tight inhibitory complex. Various biochemical and structural studies suggest that the rate of the RSL insertion upon binding a target protease is critical for inhibitory activity, and it is thought that helix F region (thFs3A and helix F) located in front of $\beta$-sheet A, should be lifted for the loop insertion during complex formation.