• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9C
• /
• pp.652-660
• /
• 2008

Applications running under embedded systems require various device drivers designed for different types and versions of the OS to manage resources effectively. In this paper, an automated device driver generator system which can generate the device drivers to be used in newer versions the target OS is proposed. In the proposed system, the structures of device drivers of specific OS are designed in the templates and stored in a library, and the target device drivers are generated by adding codes to the stored templates. Once device drivers are generated, they are registered into the kernel. The experimental results show that data transfer time has been slightly increased when compared against manually created drivers for TFT-LCD driver, USB interface keyboard/mouse driver, and AC'97 controller drivers. The code size for the generated drivers after compilation has also been increased slightly when compared with manually designed device drivers.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1534-1538
• /
• 2010

Fed-batch cultures of Hansenula polymorpha were studied to develop an efficient biosystem to produce recombinant human serum albumin (HSA). To comply with this purpose, we used a high-purity oxygen-supplying strategy to increase the viable cell density in a bioreactor and enhance the production of target protein. A mutant strain, H. polymorpha GOT7, was utilized in this study as a host strain in both 5-l and 30-l scale fermentors. To supply high-purity oxygen into a bioreactor, nearly 100% high-purity oxygen from a commercial bomb or higher than 93% oxygen available in situ from a pressure swing adsorption (PSA) oxygen generator was employed. Under the optimal fermentation of H. polymorpha with highpurity oxygen, the final cell densities and produced HSA concentrations were 24.6 g/l and 5.1 g/l in the 5-l fermentor, and 24.8 g/l and 4.5 g/l in the 30-l fermentor, respectively. These were about 2-10 times higher than those obtained in air-based fed-batch fermentations. The discrepancies between the 5-l and 30-l fermentors with air supply were presumably due to the higher contribution of surface aeration over submerged aeration in the 5-l fermentor. This study, therefore, proved the positive effect of high-purity oxygen in enhancing viable cell density as well as target recombinant protein production in microbial fermentations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.185-185
• /
• 2011

ZnTe semiconductor is very attractive materials for optoelectronic devices in the visible green spectral region because of it has direct bandgap of 2.26 eV. The prototypes of ZnTe light emitting diodes (LEDs) have been reported [1], showing that their green emission peak closely matches the most sensitive region of the human eye. Another application to photovoltaics proved that ZnTe is useful for the production of high-efficiency multi-junction solar cells [2,3]. By using the pulse laser deposition system, ZnTe thin films were deposited on ZnO thin layer, which is grown on (0001) Al2O3substrates. To produce the plasma plume from an ablated ZnO and ZnTe target, a pulsed (10 Hz) YGA:Nd laser with energy density of 95 mJ/$cm^2$ and wavelength of 266 nm by a nonlinear fourth harmonic generator was used. The laser spot focused on the surface of the ZnO and ZnTe target by using an optical lens was approximately 1 mm2. The base pressure of the chamber was kept at a pressure around $10^{-6}$ Torr by using a turbo molecular pump. The oxygen gas flow was controlled around 3 sccm by using a mass flow controller system. During the ZnTe deposition, the substrate temperature was $400^{\circ}C$ and the ambient gas pressure was $10^{-2}$ Torr. The structural properties of the samples were analyzed by XRD measurement. The optical properties were investigated by using the photoluminescence spectra obtained with a 325 nm wavelength He-Cd laser. The film surface and carrier concentration were analyzed by an atomic force microscope and Hall measurement system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.10
• /
• pp.435-442
• /
• 2006

One of the most important topics about the safety of electrical and electronic system is the reliability of the wiring system. The Time-Frequency Domain Reflectometry(TFDR) is a state-of-the-art system for detecting and estimating of the fault on a wiring. In this paper, We've considered the load resistance measurement on a coaxial cable using TFDR in a way of expanded application. The TFDR system was built using commercial Pci extensions for Instrumentation(PXI) and LabVIEW. The proposed real time TFDR system consisted of the reference signal design, signal generation, signal acquisition, algorithm execution and results display part. To implement real time system, all of the parts were programmed by the LabVIEW which is one of the graphical programming languages. Using the application software implemented by the LabVIEW, we were able to design a proper reference signal which is suitable for target cable and control not only the arbitrary waveform generator in the signal generation part but alto the digital storage oscilloscope in the signal acquisition part. By using the TFDR real time system with the terminal resistor on the target cable, we carried out load impedance measurement experiments. The experimental results showed that the proposed system are able not only to detect the location of impedance discontinuity on the cable but also to estimate the load resistance with high accuracy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.4
• /
• pp.363-372
• /
• 1997

We have developed the UHF CW/FM proximity sensor system. The UHF CW/FM Proximity Sensor is the system which recognizes the distance from the antenna to the target using the UHF band signal. To adjust sensing distance, we must change modulation frequency parameter or modulation index parameter. When we select the modulation frequency paramter for adjusting sensing distance, new modulation frequency generator and new band pass filter will be required. It is so inefficient that we choose modulation index parameters for adjusting sensing distance. In this paper, theoretical principles of the UHF CW/FM Proximity Sensor are analyzed and doppler signals for the distance from the antenna to the target are measured as the modulation index($\beta$) being changed. Three systems of which moduation indices are 38, 50, and 61 are made. We concluded that the sensing distance will decrease as the modulation index($\beta$) increases. It is in accord with the theory of this UHF CW/FM Proximity Sensor System.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2007

We developed the equipment to measure the MTF(modulation transfer function) of an optical system for automatically inspecting the surface condition of an LCD substrate. We have made an object generator with USAF(United States Air Force) targets of three bar patterns and an integrating sphere, and an image analyzer with a 2 dimensional CCD(charge coupled device) and a relay lens. The MTF of the lens under test was obtained by correcting the measured CTF(contrast transfer function) which is the ratio of the contrast in the image of the USAF target to the contrast in the object. We have measured an optical system of F/13.65 (2.6x), the MTF are 30.6 % tangential plane and 26.1 % sagittal plane at 62.5 1p/mm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.5
• /
• pp.333-340
• /
• 2003

Doppler processing is the heart of pulsed Doppler radar. It gives a clutter elimination and coherent integration. With the improvement of digital signal processors (DPSs), the implementation using them is more widely used in radar systems. Generally, so as for Doppler processor to process the input data in real time, a parallel processing concept using multiple DSPs should be used. This paper implements a programmable Doppler processor, which consists of MTI filter, DFB and square-law detector, using 8 ADSP21060s. Formulating the distribution time of the input data, the transfer time of the output data and the time required to compute each algorithm, it estimates total processing time and the number of required DSP. Finally, using the TSG that provides radar control pulses and simulated target signals, performances of the implemented Doppler processor are evaluated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.411-417
• /
• 2018

This paper proposes and implements an on-line instruction manual system which can generate the instruction manual page for the target device at the smartphone on the spot. The instruction manual app. on smartphone scans a QR code or reads NFC tag attached in the instruction manual management module embedded in the target device, and receives instruction manual data from the instruction manual management module through the Bluetooth communications and finally shows the refined instruction manual pages on the smartphone display using a Web-based templates. For the evaluation we embedded the instruction manual management module for an industrial generator with its instruction manual data. Assuming a circumstance of blackout we show that the proposed system can reduce the repair work within two steps compared to three steps in the existing one without the proposed system.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2596-2604
• /
• 1997

There are two kinds of backends in ACK:code generator(full-fledged backend) and code expander(fast backend). Code generators generate target code using string pattern matching and code expanders generate target code using macro expansion. ACK translates EM to SPARC code using code expander. The corresponding SPARC code sequences for a EM code are generated and then push-pop optimization is performed. But, there is the problem of maintaining hybrid stack. And code expander is not considered to passes parameters of a procedure call through register windows. The purpose of this paper is to improve SPARC code quality. We suggest a method of SPARC cod generation using EM tree. Our method is divided into two phases:EM tree building phase and code expansion phase. The EM tree building phase creates the EM tree and code expansion phase translates it into SPARC code. EM tree is designed to pass parameters of a procedure call through register windows. To remove hybrid stack, we extract an additional information from EM code. We improved many disadvantages that arise from code expander in ACK.

• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.849-856
• /
• 2005

As XML is more proliferate as a data type between internet programs, automatic generation methods of user input form interfaces get more attention. Recently, generating user interfaces for web application or web service clients become very popular. In this paper, we study the method of automatic generation for XForms-based user interface codes based on XML structure definitions in DTD. With the repetitive edit action model, we present a formal generation method of Input form codes and the overall user interface pages. For the generated code is using XForms as a target language, the result is clear and efficient with the MVC structure. Also, we have developed XFormsGen system which implements the proposed method over the Orbeon presentation server.