• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.273-281
• /
• 2016

In this study, after carrying out a bending test that targeted the frames of plastic film greenhouse, the load-displacement relationship was analyzed to be used as basic data to develop greenhouse construction and maintenance guidelines. As a result, regardless of the shapes of the specimen, the yield and the maximum load increased as the size of the specimen increased. The displacement also showed the same pattern. A steel pipe showed lower yield and maximum load than a square pipe, and the displacement was large. In the steel pipe case, the displacement under the yield and maximum load was in the range of approximately 1.42-4.20mm and 5.80-24.13mm, respectively. In the square pipe case, the displacement under the yield and maximum load was in the range of approximately 1.62-3.00mm and 3.13-8.01mm, respectively. Further, a large difference was observed between the result of this test and the values calculated by a conventionally provided standard. In particular, not much difference was found from the result of this test in the case of a purlin member from the values provided by previous researches. However, a large difference was observed in the column or main rafter members. Furthermore, when a wide-span and venlo type, which is a glasshouse, was used as a target(h/100 and h/80), the displacement under the yield and maximum load was approximately 28.0mm and 35.0mm, respectively, which showed a large difference compared with the Netherlands standard(14.0mm) of a glasshouse. Further, in the main rafter case, a large difference was observed in the displacement limit according to the width(i.e., span) of the greenhouse where members are used. Therefore, because the displacement limit can vary depending on various factors such as type, form, and size of a greenhouse, we determined that studies or tests that consider these factors should be carried out to reflect them in the construction and maintenance of greenhouses.

• Journal of Intelligence and Information Systems
• /
• v.29 no.2
• /
• pp.101-114
• /
• 2023

In the wartime, aircraft carrying out a mission to strike the enemy deep in the depth are exposed to the risk of being shoot down. As a key combat force in mordern warfare, it takes a lot of time, effot and national budget to train military flight personnel who operate high-tech weapon systems. Therefore, this study studied the path problem of predicting the route of emergency escape from enemy territory to the target point to avoid obstacles, and through this, the possibility of safe recovery of emergency escape military flight personnel was increased. based problem, transforming the problem into a TSP, VRP, and Dijkstra algorithm, and approaching it with an optimization technique. However, if this problem is approached in a network problem, it is difficult to reflect the dynamic factors and uncertainties of the battlefield environment that military flight personnel in distress will face. So, MDP suitable for modeling dynamic environments was applied and studied. In addition, GIS was used to obtain topographic information data, and in the process of designing the reward structure of MDP, topographic information was reflected in more detail so that the model could be more realistic than previous studies. In this study, value iteration algorithms and deterministic methods were used to derive a path that allows the military flight personnel in distress to move to the shortest distance while making the most of the topographical advantages. In addition, it was intended to add the reality of the model by adding actual topographic information and obstacles that the military flight personnel in distress can meet in the process of escape and escape. Through this, it was possible to predict through which route the military flight personnel would escape and escape in the actual situation. The model presented in this study can be applied to various operational situations through redesign of the reward structure. In actual situations, decision support based on scientific techniques that reflect various factors in predicting the escape route of the military flight personnel in distress and conducting combat search and rescue operations will be possible.

• Journal of Family Resource Management and Policy Review
• /
• v.27 no.2
• /
• pp.19-33
• /
• 2023

The purpose of this study is to explore the family diversity-related service experiences of Family Center practitioners under the main policy goal of recognizing family diversity set out in the Fourth Master Plan for Healthy Families. To this end, a focus group interview was conducted with 12 Family Center practitioners in multiple cities and districts who had extensive family service experiences. The focus group interview data were analyzed using thematic analysis. The analysis found that Family Center practitioners understood the concept of family diversity according to the changes in the family policy environment and applied it in various forms to the administration of their respective centers. However, while administering the family support services considering the aspect of family diversity, they experienced a lack of resources for various family service programs, conflicts between each family service goal and the family diversity-related program goal, and difficulties in identifying the recipients. To expand family diversity-related services in the future, the interviewees emphasized the need for education programs about family diversity targeted at Family Center practitioners, and family support services that reflect regional characteristics. They also stressed the need for changes in program operation methods, such as expanding family diversity education, and developing family service programs appropriate for diverse families. Lastly, they highlighted the need for mounting a publicity campaign for Family Centers, widening the target recipients of family programs, and expanding the budget for the administration of the family diversity project. The results of this study can serve as a basis for restructuring family services for the application and expansion of family diversity practices, and as educational material that can be used to strengthen the capacity of family service practitioners to plan and execute family support programs that take family diversity into consideration.

• The Korean Journal of Franchise Management
• /
• v.5 no.1
• /
• pp.27-47
• /
• 2014

This research was conducted on the purpose of seeking the measures of how to cope with the changing industry of Topokki franchises. Despite of the fact the number of Kukdae Topokki's stores is quite smaller than that of its competitors, such as Jaws Topokki and Addal Topokki, Kukdae Topokki is recognized as one of the front-runners in the industry. But the competition in the topokki industry has become fiercer, as the market became saturated. To find a desirable solutions, this study analyzes past-to-current status of the Topokki industry by dividing it into 4 stages and provides few strategies that Kukdae Topokki can apply to the 4th stage where 'brand awareness' is very important. To this end, few drawbacks of Kukdae Topokki are proposed as the following. First, the brand image that Kukdae Topokki pursue does not correspondent with the image in consumer's mind. Second, Kukdae Topokki has selected the wrong targeting group. It aims for the image of 'retro' to target people in their 30-40s. However, most of the consumers are people in their 20-30s. Third, the taste of Kukdae Topokki is not uniform among franchises. Fourth, the awareness and accessability are low. To provide a proactive actions for the next stages, several solutions are proposed as following. First, By managing consistent Kukdae Topokki's Brand Touch point, consumers may have a strong image on the brand by communicating with consumers consistently at all touch points. Second, instead of the existing guide from the head office(franchiser), a standardized criteria for the usage of materials and periodical education for franchisee are needed. Third, to raise the awareness of Kukdae Topokki, open many branches in the area where the main consumers(20-30s women) are mostly spread out.

• Journal of Food Hygiene and Safety
• /
• v.38 no.1
• /
• pp.1-11
• /
• 2023

Skin sanitizers are effective in killing or removing pathogenic microbial contaminants from the skin of food handlers, and the progressive growth of consumer interest in personal hygiene tends to drive product diversification. This review covers the advances in the application of efficacy tests for hand sanitizers to suggest future perspectives to establish an assessment system that is optimized to each product type (gel, liquid, and wipes). Previous research on the in vivo simulative test of actual consumer use has adopted diverse experimental conditions regardless of the product type. This highlights the importance of establishing optimal test protocols specialized for the compositional characteristics of sanitizers through the comparative analysis of test methods. Although the operational conditions of the mechanical actions associated with wiping can affect the efficacy of the removal and/or the inactivation of target microorganisms from the skin's surface, currently there is a lack of standardized use patterns for the exposure of hand sanitizing wipes to skin. Thus, major determinants affecting the results from each step of the overall assessment procedures [pre-treatment - exposure of sanitizers - microbial recovery] should be identified to modify current protocols and develop novel test methods. The ex vivo test, designed to overcome the limited reproducibility of in vivo human trials, is also expected to replicate the environment for the contact of sanitizers targeting skin microorganisms. Recent progress in the area of skin microbiome research revealed distinct microbial characteristics and distribution patterns after the application of sanitizers on hands to establish the test methods with the perspectives on the antimicrobial effects at the community level. The future perspectives presented in this study on the improvement of efficacy test methods for hand sanitizers can also contribute to public health and food safety through the commercialization of effective sanitizer products.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4C
• /
• pp.247-254
• /
• 2006

Online testing method is one of the numerical experiment methods using experimental information for a numerical analysis directly. The method has an advantage in that analysis can be conducted without using an idealized mechanical model, because mechanical properties are updated from element test for a numerical analysis in real time. The online testing method has mainly been used for the geotechnical seismic engineering, whose major target is sand. A testing method that may be applied to a consolidation problem has recently been developed and laboratory and field verifications have been tried. Although related research thus far has mainly used a method to update average reaction for a numerical analysis by positioning an element tests at the center of a consolidation layer, a weakness that accuracy of the analysis can be impaired as the thickness of the consolidation layer becomes more thicker has been pointed out regarding the method. To clarify the effectiveness and possible analysis scope of the online testing method in relation to the consolidation problem, we need to review the results by applying experiment conditions that may completely exclude such a factor. This research reviewed the results of the online consolidation test in terms of reproduction of the consolidation settlement and the dissipation of excess pore water pressure of a clay specimen by comparing the results of an online consolidation test and a separated-type consolidation test carried out under the same conditions. As a result, the online consolidation test reproduced the change of compressibility according effective stress of clay without a huge contradiction. In terms of the dissipation rate of excess pore water pressure, however, the online consolidation test was a little faster. In conclusion, experiment procedure needs to improve in a direction that hydraulic conductivity can be updated in real time so as to more precisely predict the dissipation of excess pore water pressure. Further research or improvement should be carried out with regard to the consolidation settlement after the end of the dissipation of excess pore water pressure.

• Journal of Food Hygiene and Safety
• /
• v.38 no.3
• /
• pp.79-88
• /
• 2023

Trifludimoxazin is a triazinone herbicide that inhibits the synthesis of protoporphyrinogen oxidase (PPO). The lack of PPO damages the cell membranes, leading to plant cell death. An official analytical method for the safety management of trifludimoxazin is necessary because it is a newly registered herbicide in Korea. Therefore, this study aimed to develop a residual analysis method to detect trifludimoxazin in five representative agricultural products. The EN method was established as the final extraction method by comparing the recovery test and matrix effect with those of the QuEChERS method. Various sorbent agents were used to establish the clean-up method, and no differences were observed among them. MgSO₄ and PSA were selected as the final clean-up conditions. We used LC-MS/MS considering the selectivity and sensitivity of the target pesticide and analyzed the samples in the MRM mode. The recovery test results using the established analysis method and inter-laboratory validation showed a valid range of 73.5-100.7%, with a relative standard deviation and coefficient of variation less than 12.6% and 14.5%, respectively. Therefore, the presence of trifludimoxazin can be analyzed using a modified QuEChERS method, which is widely available in Korea to ensure the safety of residual insecticides.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.297-307
• /
• 2010

Recently, maintenance engineering and technology for civil and building structures have begun to draw big attention and actually the number of structures that need to be evaluate on structural safety due to deterioration and performance degradation of structures are rapidly increasing. When stiffness is decreased because of deterioration of structures and member cracks, dynamic characteristics of structures would be changed. And it is important that the damaged areas and extent of the damage are correctly evaluated by analyzing dynamic characteristics from the actual behavior of a structure. In general, typical measurement instruments used for structure monitoring are dynamic instruments. Existing dynamic instruments are not easy to obtain reliable data when the cable connecting measurement sensors and device is long, and have uneconomical for 1 to 1 connection process between each sensor and instrument. Therefore, a method without attaching sensors to measure vibration at a long range is required. The representative applicable non-contact methods to measure the vibration of structures are laser doppler effect, a method using GPS, and image processing technique. The method using laser doppler effect shows relatively high accuracy but uneconomical while the method using GPS requires expensive equipment, and has its signal's own error and limited speed of sampling rate. But the method using image signal is simple and economical, and is proper to get vibration of inaccessible structures and dynamic characteristics. Image signals of camera instead of sensors had been recently used by many researchers. But the existing method, which records a point of a target attached on a structure and then measures vibration using image processing technique, could have relatively the limited objects of measurement. Therefore, this study conducted shaking table test and field load test to verify the validity of the method that can measure multi-point displacement responses of structures using image processing technique.

• The Journal of Korean Philosophical History
• /
• no.28
• /
• pp.183-212
• /
• 2010

The purpose of this study is to provide a theoretical base for making a character education program and to develop a school violence prevention program and analysis the effects of the program in elementary schools. The prevention program was designed to target students, teachers, parents and community residents and utilized the above groups as participants. This study is developed on the basis of Social Emotional Learning as well as Emotional Intelligence which put on the importance on the role of emotion in the problem solving. In concrete, school violence prevention program based on the social and emotional learning, development of integrative programs articulating three key domains directly and indirectly influencing students' character formation, maximum use of the educational institutes' moral education curriculums and potential curriculums in the surrounding environment. To do so, bibliographical study and analysis of the research materials are carried out, and also the professionals' advice is received. The study object is 113 elementary school students of 2 elementary schools in Seoul. For them, the preparatory program is carried out from September 2009 to November 2009. And then, the analysis for the satisfaction degree of participation in the program and for the descriptive results of the school violence prevention education is carried out.

• Asia Marketing Journal
• /
• v.13 no.4
• /
• pp.159-189
• /
• 2012

What attracts consumers to bloggers' reviews? Consumers would be attracted both by the Bloggers' expertise (i.e., knowledge and experience) and by his/her unbiased manner of delivering information. Expertise and trustworthiness are both virtues of information sources, particularly when there is uncertainty in decision-making. Noting this point, we postulate that consumers' motives determine the relative weights they place on expertise and trustworthiness. In addition, our hypotheses assume that tie strength moderates consumers' expectation on bloggers' expertise and trustworthiness: with expectation on expertise enhanced for power-blog user-group (weak-ties), and an expectation on trustworthiness elevated for personal-blog user-group (strong-ties). Finally, we theorize that the effect of credibility on willingness to accept a review is moderated by tie strength; the predictive power of credibility is more prominent for the personal-blog user-groups than for the power-blog user groups. To support these assumptions, we conducted a field survey with blog users, collecting retrospective self-report data. The "gourmet shop" was chosen as a target product category, and obtained data analyzed by structural equations modeling. Findings from these data provide empirical support for our theoretical predictions. First, we found that the purposive motive aimed at satisfying instrumental information needs increases reliance on bloggers' expertise, but interpersonal connectivity value for alleviating loneliness elevates reliance on bloggers' trustworthiness. Second, expertise-based credibility is more prominent for power-blog user-groups than for personal-blog user-groups. While strong ties attract consumers with trustworthiness based on close emotional bonds, weak ties gain consumers' attention with new, non-redundant information (Levin & Cross, 2004). Thus, when the existing knowledge system, used in strong ties, does not work as smoothly for addressing an impending problem, the weak-tie source can be utilized as a handy reference. Thus, we can anticipate that power bloggers secure credibility by virtue of their expertise while personal bloggers trade off on their trustworthiness. Our analysis demonstrates that power bloggers appeal more strongly to consumers than do personal bloggers in the area of expertise-based credibility. Finally, the effect of review credibility on willingness to accept a review is higher for the personal-blog user-group than for the power-blog user-group. Actually, the inference that review credibility is a potent predictor of assessing willingness to accept a review is grounded on the analogy that attitude is an effective indicator of purchase intention. However, if memory about established attitudes is blocked, the predictive power of attitude on purchase intention is considerably diminished. Likewise, the effect of credibility on willingness to accept a review can be affected by certain moderators. Inspired by this analogy, we introduced tie strength as a possible moderator and demonstrated that tie strength moderated the effect of credibility on willingness to accept a review. Previously, Levin and Cross (2004) showed that credibility mediates strong-ties through receipt of knowledge, but this credibility mediation is not observed for weak-ties, where a direct path to it is activated. Thus, the predictive power of credibility on behavioral intention - that is, willingness to accept a review - is expected to be higher for strong-ties.