• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.113-127
• /
• 2021

This study aims to analyze the style of men's suits and extract expressional words for the development of semantic differential scales of visual images according to the change in silhouette. Research methods are literature studies, case studies, and questionnaires. The stimuli were created using CLO 3D, a virtual sewing CAD. This study's results are as follows: 1) The British suit jacket has an angled shoulder line using thin pads, and a slightly higher waistline. The pants of the suit have a high waistline and two pleats, so the thighs of the pants are wide. The American suit jacket has a natural shoulder line, and the waistline is not emphasized. The width of the jacket is relaxed, and the length is long. The pants of the suit have a higher waistline, and the pants are wide as well. The Italian suit jacket has wide shoulders, and the waistline is connected lower with a soft curve, and the length is relatively short. The trousers of the suit are tapered and get narrower as it goes down to the hem. 2) Because it originated in the practices of true bespoke tailoring, traditional British suits have a far more 'fitted' silhouette than the mass-produced styles that became emblematic of the American style. By the late 1950s, a sack-style suit was standard American business attire. This technique gives the sack suit its characteristically 'boxy' silhouette. The "Continental" presented a highly tailored silhouette, with padded shoulders, a slim, tight-fitting chest, and a closely tapered waist. The story was that Italian culture valued aesthetics over all else and thus sought the 'slim' suit style as much as possible. 3) The main expressional words of visual images for men's suits differ greatly depending on the silhouette of suit. The visual images are ranked in the order of 'neat', 'classic', 'educated', 'hard', 'mature', for fitted silhouettes. The words of 'masculine', 'basic', 'comfortable', 'simple', 'mature', 'conservative', 'modern', are ranked for boxy silhouettes. And the words of 'slim', 'young', 'neat', are noted for slim silhouettes.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1273-1274
• /
• 2015

본 논문에서는 주파수 무관(frequency independence) 특성을 갖는 자기상보 구조(self-complementary structure)로 된 안테나의 급전선로(feed line)로 사용할 수 있는 초광대역 발룬(ultra-wideband balun)을 제안하였다. 발룬을 설계하기 위해 클로펜스타인 테이퍼(Klopfenstein taper)를 사용하여 임피던스 프로파일(impedance profile)을 구하고 이를 평행 스트립 선로(parallel strip line) 구조로 구현하기 위해 등각사상방법(conformal mapping method)을 이용했다. 설계한 발룬을 직접 제작하여 측정한 결과, 대역폭은 반사손실 -10 dB를 기준으로 할 때 0.45~10.53 GHz까지 10.08 GHz로 나타나, UHF(ultra high frequency) 통신대역에서 UWB(ultra-wideband) 통신대역에 이르기까지 매우 넓은 주파수 범위에서 자기상보형 안테나의 입력 임피던스 $188{\Omega}$을 $50{\Omega}$의 특성 임피던스에 정합시킬 수 있음을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.677-681
• /
• 2014

A high voltage pulse generator was fabricated to radiate ultrawide band electromagnetic pulse. A coaxial type of Blumlein pulse forming line is employed to produce a pulse of high voltage (>300 kV) and short pulse duration (~5 ns). A helical strip/wire type of air-cored pulse transformer was used to charge the Blumlein pulse forming line up to more than 300 kV. A peaking switch is essential to make the pulse rise time as fast as possible. Typically, the rise time is ~500 ps. The output pulse of the generator is radiated into air through an exponentially tapered TEM horn antenna. The electric field intensity of a radiated pulse was measured as a function of the distance from the transmitting horn as well as the output voltage of the peaking switch. The peak-to-peak value of the electric field intensity at 10 m from the TEM antenna was~100 kV/m.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.299-302
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shaped slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is developed to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.53-59
• /
• 2002

In this paper, we present design results for an orthomode transducer(OMT) to be used in multi-band antenna feeds. The OMT is realized in the form of a tapered square waveguide, where 18-20 GHz ports are placed in the taper region normal to the waveguide axis, while 30-45 GHz ports are placed in line with the waveguide axis. The reflection coefficient of each port is designed to be less than 20 dB, while the isolation between ports are greater than 15 dB. Thin septa are placed in side ports to reduce the effect of side ports on the return loss of the in-line port. The commercial software HFSS？ is used to design the whole structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1909-1913
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shared slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is de#eloped to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.376-380
• /
• 2014

In the present study, oblique L-shaped monopole slot antenna with broadband characteristic is newly proposed. For bandwidth enhancement as well as size reduction, L-shaped slot with two open-terminations on the ground edge is used. The lower part of L-shaped slot comprises oblique form for bandwidth enhancement in low frequency band, whereas its higher part comprise tapered form for its enhancement in high frequency band. The short-circuit terminated microstrip line which is generally known to be more useful for bandwidth enhancement than open-circuit termination is used. The measured impedance bandwidth($S_{11}{\leq}-10dB$) and gain of the fabricated antenna have been observed to be 4.72 GHz (2.28~7 GHz) and more than 3dBi over the passband respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.4
• /
• pp.641-646
• /
• 2024

This paper is studied for the design and experiment of a wideband printed 1x2 dipole array antenna for 3.5GHz band application. The printed dipole antenna used in the array antenna was implemented in the form of a rectangular strip, and was consisted with a broadside coupled stripline (BCS). The feed line was designed to be tapered for broadband impedance matching. As a result of comparing the simulation results and measurement results, it was found that the two results were in good agreement with 2.8% error(100MHz shift @3.5GHz). As a result of the experiment, based on VSWR=2, a bandwidth of about 16% was obtained from the center frequency of 3.5 GHz to 3.15~3.70 GHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.931-939
• /
• 2013

In this paper, we try to find the lifting-line method which is applicable to the conceptual design of aircraft wings, and analyze the accuracy and coverage of the method. Two methods that are extended from the lifting-line theory of Prandtl are selected. One of the methods is Weissinger's method which imposes the velocity boundary condition at the control points located at the quarter chord, and the other is Phillips's method which combines the three-dimensional vortex lifting law. Calculations are performed for an elliptic wing, a swept back wing, and a tapered unswept wing with dihedral angle and geometric twist. The aerodynamic data of the potential flow such as spanwise distributions of circulation and downwash, lift and induced drag are obtained through calculations, and these data are compared with theoretical results and wind tunnel test data. As a result, Weissinger's method showed good accuracy and reliability regardless of wing shapes, but Phillips's method revealed inaccurate results for a swept back wing.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.581-586
• /
• 2020

In this paper, the design process and method for a compact wideband loop antenna for terrestrial digital TV (DTV) and ultra high definition (UHD) TV applications was proposed. Horizontal slits were added on the two circular sectors of the proposed loop antenna in order to miniaturize the existing wideband loop antenna consisting of a square loop and two circular sectors. A CPW transmission line was inserted in the center of the lower circular sector as a feed line. The CPW feed line was designed using the 75 ohm port impedance for DTV and UHD TV applications, and a tapered center-signal line was designed to improve the impedance matching. The final designed antenna was fabricated on an FR4 substrate with a thickness of 0.8 mm. The experiment results show that the proposed compact loop antenna operates in the frequency band of 444.3-820.1 MHz for a VSWR < 2, which fully covers the DTV and UHD TV bands.