• Journal of Korea Water Resources Association
• /
• v.40 no.9
• /
• pp.677-685
• /
• 2007

The objective of this study is to evaluate the applicability of multi-objective genetic algorithm(MOGA) in order to calibrate the parameters of conceptual rainfall-runoff model, Tank model. NSGA-II, one of the most imitating MOGA implementations, is combined with Tank model and four multi-objective functions such as to minimize volume error, root mean square error (RMSE), high flow RMSE, and low flow RMSE are used. When NSGA-II is employed with more than three multi-objective functions, a number of Pareto-optimal solutions usually becomes too large. Therefore, selecting several preferred Pareto-optimal solutions is essential for stakeholder, and preference-ordering approach is used in this study for the sake of getting the best preferred Pareto-optimal solutions. Sensitivity analysis is performed to examine the effect of initial genetic parameters, which are generation number and Population size, to the performance of NSGA-II for searching the proper paramters for Tank model, and the result suggests that the generation number is 900 and the population size is 1000 for this study.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.210-215
• /
• 2004

The Purpose of this study are to develop the simulation(Tank model, Rainfall-runoff model) for the estimation of wily river discharge and for evaluation of wily pollutant loads from the watersheds of the objected basin area. As apply this constructed Tank model to Nakdong river region, we evaluated the wily river discharge of Nakdong river from use-land conditions, precipitation and evaporation data of 3 years(from 1998 to 2000) and investigate the seasonal fluctuation of SS, COD, TN, TP inflowing into Nakdong river. The result shows that summer has high pollutant level than winter in seasonal characteristic and the down stream has high pollutant level than the upper stream. The annual average of SS, COD, TN, TP flawing in Nakdong river(Samranjin) was estimated each 691ton-COD/year, 1854.2ton-SS/year, 382.8ton-TN/year and 13.0ton- TP/year.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.93-98
• /
• 2001

This study was performed to analyse the rainfall and the rainfall-runoff characteristics of a rural watershed. The Sangwha basin($105.9km^{2}$) in the Geum river system was selected for this study. The arithmetic mean method, the Thiessen's weighing method, and the isohyetal method were used to analyse areal rainfall distribution and the Huff's quartile method was used to analyse temporal rainfall distribution. In addition, daily runoff analyses were peformed using the DAWAST and tank model. In the model calibration, the data from June through November, 1999 were used. In the model calibration, the observed runoff depth was 513.7mm and runoff rate was 45.2%, and the DAWAST model simulated runoff depth was 608.6mm and runoff rate was 53.5%, and the tank model runoff depth was 596.5mm and runoff rate was 52.5%, respectively. In the model test, the data from June through November, 2000 were used. In the model test, the observed runoff depth was 1032.3mm and runoff rate was 72.5%, and the DAWAST model simulated runoff depth was 871.6mm and runoff rate was 61.3%, and the tank model runoff depth was 825.4mm and runoff rate was 58%, respectively. The DAWAST and tank model's $R^{2}$ and RMSE were 0.85, 3.61mm, and 0.85, 2.77mm in 1999, and 0.83, 5.73mm, and 0.87, 5.39mm in 2000, respectively. Both models predicted low flow runoff better than flood runoff.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.412-418
• /
• 2000

The purpose of this study is estimation of daily runoff in the watershed with insufficient hydrological data using tank model. In order to estimate, twentysix watersheds were selected to calibrate tank model parameters that were defined by a trial and error method. Results were correlated with characteristics of watershed. Relationships between the parameters and the watershed characteristics were derived by a multiple regression analysis. The simulation results were in agreement with the observed data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1305-1309
• /
• 2008

본 연구에서는 지금까지 국내에서 주로 사용되고 있는 대표적인 집중형 모형인 TANK 모형과 국 내외적으로 적용성이 점차 확대되고 있는 GIS 기반의 준분포형 모형인 SWAT(Soil Water Assessment Tool) 모형을 각각 MODSIM 모형과 연계하여 유역 내 이수상황을 고려한 하천 자연유하량을 분석하였으며, 두 연계모형 간의 비교분석을 통해 SWAT 모형의 국내 유역에 적용성 및 두 모형의 갈수기 하천 자연유하량 산정의 정확성을 검토하였다. 적용대상 유역으로 유역 내 이수활동이 이루어지고 있는 합천댐 유역을 선정하였으며, 합천댐 유역에 최근 10년간(1997년$\sim$2006년)의 장기유출량을 산정해본 결과 두 모형 모두 유출률에서는 연도별로 관측치와 다소 차이를 나타낼 때도 있지만 그 이외에 평균제곱근 오차는 3.339 이하, 결정계수 및 모형의 효율성 계수는 0.707 이상으로 나타남으로써 SWAT-MODSIM 모형과 TANK-MODSIM 모형 모두 장기 일유출량 추정 및 유역 전반의 통합관리 측면에서 그 적용성 및 활용이 우수하다고 판단된다.

• Solar Energy
• /
• v.18 no.4
• /
• pp.59-66
• /
• 1998

It was compared with experimental data to verify TRNSYS Model of the thermosyphon hot water system and the various simulations were conducted to optimize the component parameters of the system. To obtain consistent simulation results the system model, which could accurately describ the thermal storage tank temperature stratification and the friction head for mass flow rate, was used. The optimization of collector parameters(collector aspect ratio, riser numbers per header unit length), thermal storage tank parameters(ratio of tank length to tank diameter, heat exchanger type), system parameters(ratio of tank volume to collector area) was simulated by TRNSYS program. The simulation results indicate that the system performance is more effected by collector aspect ratio and the ratio of tank volume to collector area than the othor parameters.

• Journal of Energy Engineering
• /
• v.22 no.1
• /
• pp.28-37
• /
• 2013

Stirred tank is widely used in various industries for mixing operations and chemical reactions for single- or multi-phase fluid systems. For designing agitator of high performance, quantity data of internal flow characteristics influenced by mixing performance are definitely confirmed but quantity analysis about the transient flow characteristics of complicate structure is recognized as difficult problem in the present. In this study, two models of commercial CFD code Fluent 6.3 used to propose suitable for the tank analysis. Agitation of Stirred tank is analyzed using a mixed model and the flow in the stirred tank is analyzed using a standard k-${\varepsilon}$ model. Multiple reference frame(MRF) and Sliding mesh(SM), the analysis techniques were used For compare a result of CFD with a visualization experiment result, to grasp internal flow and mixing characteristic in stirred tank and to present fundamental analysis method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1337-1347
• /
• 2013

The parametric analysis on ultimate behavior of buried cylindrical GFRP(Glass Fiber Reinforced Polymer) septic tank was presented. Two kinds of F.E. analysis model(soil-spring model and 3D full model) was constructed. The ultimate behavior of septic tank was investigated according to the size of stiffened steel ring and properties of underground soil. Ramberg-Osgood model and Druker-Prager model were used for material nonlinear characteristics of GFRP septic tank and soil, respectively. The diameter and thickness of stiffened steel ring inside septic tank, elastic modulus and internal friction angle of soil were selected for parametric variables. The ultimate behavior of septic tank, load-displacement, axial and hoop strain, were calculated and investigated.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.63-72
• /
• 2020

Tank, which is a representative ground weapon system, is one of the most important weapon systems in each country. For the cost-effective acquisition of a tank based on scientific analysis, the operational concept and effectiveness should be studied based on engagement simulation technology. Besides physical capabilities including maneuver and communication, logical models including decision-making of a tank commander should be developed systematically. This paper describes a method to model a tank for engagement simulation based on Base System Model(BSM), which is the standard architecture of the weapon system model in AddSIM, an integrated engagement simulation software. In particular, a method is proposed to develop logical models by hierarchical and modular approach based on human decision-making model. The proposed method applies a mathematical formalism called DEVS(Discrete EVent system Specification) formalism. It is expected that the proposed method is widely used to study the operational concept and analyze the effectiveness of tanks in the Korean military in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.4
• /
• pp.37-45
• /
• 2003

Model tests using 2.0m model of the series 60 form( $C_{b}$= 0.6) were carried out in the Circulating Water Channel (CWC) in the Chosun University (CU, Korea) for the purpose of a correlative study with Towing Tank (TT). Resistance, propeller open water, self propulsion and wake survey tests were carried out and the results were extrapolated to the ship scale. These results were compared with the extrapolated ship values based on the model test of 7.0m model in the TT at the Korea Research Institute of Ships and Ocean Engineering (KRISO, Korea). The CWC test results were correlated with the results of the towing tank tests.s.