• 한국자기학회지
• /
• 제24권5호
• /
• pp.160-164
• /
• 2014

본 논문에서는 설계변수의 불확실성을 고려한 BLDC 전동기의 코깅 토크 저감 설계를 수행하기 위하여 개선된 다구찌법을 이용한 효율적인 강건 최적설계 기법을 제안하였다. 일반적인 강건 최적설계 문제를 처리할 때 발생하는 기존 다구찌법의 단점을 해결하기 위하여, 벌칙함수와 최적수준 탐색기법이 새로이 도입되었다. 제안된 설계기법의 타당성을 검증하기 위하여 5 kW, 정격속도 2,300 rpm, 정격 토크 20 Nm의 전기자동차 구동용 BLDC 전동기의 코깅 토크 저감을 위한 강건 설계가 수행되었다. 또한 도출된 설계결과를 코깅 토크, 정격 토크 및 토크 리플에 대해 개념설계와 결정론적 최적설계 된 전동기들의 결과와 비교하였다.

• 전기학회논문지
• /
• 제56권3호
• /
• pp.498-505
• /
• 2007

This paper proposes the novel flux barrier that built in q-axis in rotor of IPM type BLDC motor. The novel flux barrier aims to reduce the motor vibration with reduced cogging torque and lessened torque ripple by the sinusoidal waveform distribution of the flux generated in the permanent magnet. For optimization of the novel flux barrier, the Taguchi method is effectively employed which considered multiple objective quality characteristics, such as cogging torque, average torque and efficiency. The result of proposed model compare with the initial model and it is verified by 2D finite element method (FEM) results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.40-42
• /
• 2002

This paper presents the optimal design of BLDC motor keeping the average torque and cogging toruqe of the initial model while minimizing the volume of magnet pole by FEM and Taguchi method. Experimental tests are performed by Finite element method, and the second order polynomial equations are obtained from FEM results due to design parameter variation referred to orthogonal arrays by Taguchi. The presented optimization shows a big reduction of computation time and a largely reduced volume of magnet pole.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.65-67
• /
• 2007

This paper proposes a novel flux barrier in q-axis of rotor in IPM type BLDC motor, The proposed flux barrier can reduce cogging torqeu and diminisg torque ripple by sinusoidal waveform distribution of flux generated in the permanent magnet. To determine the optimal shape of the novel flux barrier, we also propose a modified Taguchi method which considering multiple quality characteristics, such as cogging torque, average torque, and efficiency. The proposed design and method were analyzed by using the 2D finite element method (FEM). Results of the proposed model were compared with initial model.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.84-89
• /
• 2003

The finite element method (FEM) is typically used in the process of motor design. However, the FEM requires computation time, Therefore, decreasing the number of FEM simulations may also decrease the simulation cost. Several optimal design methods overcoming this problem have been recently studied. This paper investigates the optimal design of the magnet pole of a BLDC motor through reducing simulation cost. The optimization minimizes the magnet volume and limits the average and cogging torques to certain values. In this paper, the response surface methodology and Taguchi's table for reducing the number of FEM simulations are used to approximate two constraints. The optimization result shows that the presented strategy is satisfactorily performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.815-816
• /
• 2006

This paper proposes a novel design method for flux barrier which built in q-axis in rotor of IPM type BLDC motor. It aims to reduce the motor vibration with reduced cogging torque and lessened torque ripple by the sinusoidal waveform distribution of flux generated in the permanent magnet, which results from designed flux barriers. Design of flux barrier optimized using the Taguchi methods that considered multiple quality characteristics, such as cogging torque, average torque and efficiency are considered. The result of proposed method is compared and verified with 2D finite element method (FEM).

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.226.1-226.1
• /
• 2008