• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2569-2574
• /
• 2013

In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In STAC protocol, the reader uses the tag number estimation scheme to determine the number of slots for the next reply round. If errors occur in the estimated number of tags, the identification performances will be degraded due to a lot of collision or idle slots. Therefore, in this paper, we propose an ERPB algorithm that the reader cancels the reply round when it experiences a series of collision or idle slots during the current round. The transmission probability control for the tag is also applied to the proposed algorithm. Through simulations, it is demonstrated that the collision rate for the proposed scheme is about 39% lower than STAC protocol. Therefore, the proposed scheme can achieve faster tag identification time compared with STAC protocol due to the low collision rate.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.318-318
• /
• 2004

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.88-95
• /
• 2007

In this paper, the authors discussed the overview of a method for estimating working area for development of a monitoring system for labor management using RFID technology. RSSI (Receive Signal Strength Indication) data of RFID tag was obtained from readers set around the indoor space. An estimating model of the working area was prepared. The model had a range of the percentage of correctly classified from 61% to 95%. According to the result, the possibility of the monitoring system and the factors necessary to develop for practical were proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.180-182
• /
• 2021

This paper proposes a method for estimating the location of a user using a beacon to provide a service in an indoor environment. To estimate the location using the beacon, a Gaussian filter was applied to the RSSI value of the beacon, and the distance conversion function was obtained through the filtered RSSI value to estimate the tag location by trilateration. Then, in the indoor space where the beacons are installed, the location estimation accuracy of 8 places where 3 beacons are at a certain distance was confirmed. As a result, it was possible to confirm the position estimation accuracy of ±0.097 standard deviation and 0.242 distance error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1133-1138
• /
• 2010

In the anti-collision scheme proposed by EPCglobal Class-1 Gen-2 standard, the frame size for a query round is determined by Q-algorithm. In the Q-algorithm, the reader calculates a frame size without estimating the number of tags in it's identification range. It uses only the slot status. Therefore, Q-algorithm has advantage that the reader's algorithm is simpler than other algorithms. However, it cannot allocate an optimized frame size because it does not consider the number of tags. Also, the conventional Q-algorithm does not define an optimized parameter value C for adjusting the frame size. In this paper, we propose a modified Q-algorithm and evaluate the performance with computer simulations. The proposed Q-algorithm estimates the number of tags at every query round, and determines the parameter value C based on the estimated number of tags.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.161-166
• /
• 2009

The lower flash points for the tert-pentanol + propionic acid and p-xylene + propionic acid systems were measured by Tag open-cup apparatus. The experimental data were compared with the values calculated by the Raoult's law, the van Laar equation and the NRTL equation. The calculated values based on the van Laar and NRTL equations were found to be better than those based on the Raoult's law. It was concluded that the van Laar and NRTL equations were more effective than the Raoult' law at describing the activity coefficients for non-ideal solution such as the tert-pentanol + propionic acid and p-xylene + propionic acid systems. The predictive curve of the flash point prediction model based on the NRTL equation described the experimentally-derived data more effectively than was the case when the prediction model was based upon the van Laar equation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.6
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• The Journal of Society for e-Business Studies
• /
• v.19 no.1
• /
• pp.1-14
• /
• 2014

This paper presents the development of a stock control system of POP system design based on RFID in SCM and its economic efficiency. A stock control system is proposed for 900MHz passive type RFID system. The RFID system is composed of a RFID reader and four antennas to read the tag IDs. A cost estimation model is adapted based on the total product profit by various tag prices. The result of the economic efficiency analysis can indicate any invested model for the automation system which have initial investment should be used. This solution indicates the limit of the break even point according to the input. And it can be concluded that the stock control can be developed by RFID readers and passive tags with directional arrangement of several antennas. Also, the economical evaluation model can be a decision method for company to adapt the new developed system.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.9-18
• /
• 2013

In this paper, we design and implement an intelligent system for finding objects with RFID(Radio Frequency IDentification) tag in which an mobile robot can do. The system we developed is a learning system of artificial neural network that uses RSSI(Received Signal Strength Indicator) value as input and absolute coordination value as target. Although a passive RFID is used for location estimation, we consider an active RFID for expansion of recognition distance. We design the proposed system and construct the environment for indoor location estimation. The designed system is implemented with software and the result related learning is shown at test bed. We show various experiment results with similar environment of real one from earning data generation to real time location estimation. The accuracy of location estimation is verified by simulating the proposed method with allowable error. We prepare local test bed for indoor experiments and build a mobile robot that can find the objects user want.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.459-462
• /
• 2005

In this paper, we investigate the high precision location estimation algorithm in 2.45GHz band RTLS with multiple tags. The location is estimated in LOS environments, 300m ${\times}$ 300m area, and 2D coordinates adopting a TDOA scheme which is not necessitate the transmission time of tags. We evaluate the average estimation error in distance assuming that tags are randomly distributed and the readers(3${\sim}$8) are uniformly(equal space) placed in test area. In results, average estimation error is 3.12m and 1.47m at reader numbers of 4 and 8, respectively. Minimum estimation error is obtained when the accumulated receiving signal from a tag is 3 or 4 regardless of available reader numbers. The error is less than 3m, satisfies the specification of RTLS.