• Korean Journal of Construction Engineering and Management
• /
• v.12 no.1
• /
• pp.23-32
• /
• 2011

Domestic leading construction companies has been establishing and performing TACT scheduling method, similar to linear scheduling model such as line of balance and repetitive schedule, and etc. in which repetitive construction works are involved like high-rise building. Linear scheduling model has been researched as a visual scheduling method presenting the work space and time information. Likewise scheduling constraints of CPM network such as finish-to-finish, start-to-start, finish-to-start, start-to-start, linear scheduling model also has the relationships constraints, namely boundary conditions, between activities. It is especially necessary to define the boundary conditions of the activities' relationships in order to apply the linear scheduling model to be compatible with the network schedule. Therefore, this research considers the boundary conditions between activities for establishing the linear scheduling model. This paper also applies the proposed boundary conditions to TACT schedule and then deduces the main considerations in order to establish and perform TACT schedule.

• Journal of Information Display
• /
• v.7 no.4
• /
• pp.17-20
• /
• 2006

The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the large-size AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the $4^{th}$ - $8^{th}$ Generation AMOLEDs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.119-122
• /
• 2002

Collimators were mostly produced by handwork and semi-automatic system in some companies. Under this situation, automatic manufacturing system for optical collimators is on the rise most essential technique in the development of optical communication components. In this study, automatic manufacturing system was designed and constructed to develop optical collimators with high functionality. Also optical collimators were manufactured using a developed automatic system. We have compared collimators made by automatic system and handwork fer performance test with a measured values of angle alignment, beam size and TIL. As a result, it brought a reduction of the tact time fur manufacturing and improvement of an efficiency of optical collimators, and then it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• Transactions of Materials Processing
• /
• v.11 no.7
• /
• pp.589-595
• /
• 2002

Up to now, Collimators have been generally produced by handwork and only a few companies have produced by semi-automatic system. Under this situation, automatic system for assembly of optical collimator has risen as a most essential technique in the development of optical communication components. In this study, it was constructed to develop optical collimators with high functionality and We manufactured optical collimators with a GRIN rod lens using automatic system. Therefore, we worked a performance test through a comparison of collimators made by automatic system and handwork with angle alignment, beam size. Also we compared common product with auto-manufactured sample. As a result, it brought a reduction of the tact time and an improvement of an efficiency and a productivity of optical collimators. therefore it was found that automatic system was indispensable for materialization of optical collimators with high functionality.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.1
• /
• pp.101-115
• /
• 2005

This study deals with the procedure of safety improvement, productivity increase ,and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind ,the necessity ,and the concept of preventive maintenance ,and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss ,comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.131-141
• /
• 2004

This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.651-654
• /
• 2006

The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the largesize AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the $4^{th}$ - $8^{th}$ Generation AMOLEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.407-410
• /
• 2003

We will introduce our new concept deposition system for SMOLED manufacturing in this conference. This system is designed to deposit organic and metal material to downward to overcome the limit of substrate size and process tact time hurdle for OLED mass production, and is organized with organic deposition chamber, substrate pre-cleaning chamber, metal deposition chamber and encapsulation system. These entire process chambers are integrated with linear type substrate transfer system. We also compare our new SMOLED manufacturing system with conventional vacuum deposition systems, and show basic organic thin film property data, organic material deposition property data, and basic device property.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.09a
• /
• pp.51-69
• /
• 2001

Japan Jisso Technology Roadmap 2001 (JJTR2001) was published by JEITA in April 2001. Future electronic products request further higher assembly technology (ex. Finer pitch packages & components, 3D assembly, etc.) to reduce size and improve performance of the electric products. For LSI Packages, finer ball pitch technology and finer chip connection technology will be developed. For electric components, further size reduction will be developed. For Jisso (assembly) machine, finer pitch assembly and short tact time technology will be developed. Mr. Utsunomiya will present PCB roadmap next.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.425-438
• /
• 2021

The purpose of this study is to analyze local cultural festivals hosted contact-free in the corona era and to suggest the direction for sustainable festivals in the post-corona era. To this end, by analyzing the cases of well-known festivals held contact-free in 2020 and 2021, we tried to get implications for the festivals in the post-corona era from there. As a result of this study, contact-free festivals had the following characteristics. First, the on-tact method, which produces and transmits a video or allows interaction through real-time participation, was prominent. Second, in order to compensate for the shortcomings of the contact-free method, various efforts have been made to enable on-tact experience by making and delivering experience kits in the case of experiential elements of the festival in advance. Third, communication was secured through real-time comments, and fourth, products were sold through the Internet and live commerce channels, and a certain effect was obtained. In particular, in the case of online festivals, there is a problem of loss of the sense of place of the festival, but there are cases of online festivals with more participation than offline festivals. It is judged that the problem of how to achieve this will become a reference material for the future development of contact-free festival contents.