• International Journal of Quality Innovation
• /
• 제5권1호
• /
• pp.68-84
• /
• 2004

The measured values of a same object should remain constant regardless of the object's position in the image. In other words, its measured values should not vary as its position in the image changes. However, lens' image distortion, heterogeneous light source, varied angle between the measuring apparatus and the object, and different surroundings where the testing is set up will all cause variation in the measurement of the object when the object's position in the image changes. This research attempts to compensate the machine vision image distortion caused by the object's position in the image by developing the compensation table. The compensation is accomplished by facilitating users to obtain the correcting object and serves the objective of improving the precision of measurement.

• Journal of Welding and Joining
• /
• 제14권4호
• /
• pp.79-88
• /
• 1996

For improvement in productivity and weld quality, weld seam tracking and welding parameter control are very essential in the welding of a structure which can not be cxactly fit-up due to mismatch, discontinous gap, deflection, etc.. In this study, an automatic weld seam tracking system is developed for I-butt joint structure, and the system consists of XYZ working table, vision sensor and user interface program. In the developed vision sensor system, an image projection algorithm for weld-line detection and an adaptive current control algorithm for gap variation were implemented. The user interface program developed in this study by basing on the objct oriented concept could provide very convenient way to utilize the tracking system with the pull-down menu driven structure. The developed system showed a good seam tracking and weld quality control capability corresponding to deflected weld lines and gap variations.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.36-42
• /
• 1997

This paper presents a new design technique for performing high quality low bit rate image compression. A hybrid coder(HC) which combines Mean Removed Important Coefficient Selection based JPEG(MR-ICS-JPEG) and Adaptive Vector Quantization (AVQ) is proposed. A new quantization table is developed using the Important Coefficient Selection(ICS) method; the importance of each coefficient is determined using the orthonormal property of the DCT. This quantization table is applied to standard JPEG with mean removal(MR) strategy before processing. This scheme, called MR-ICS-JPEG, produces more than 2 dB enhanced performance in terms of PSNR over standard JPEG. A set of homogeneous codebooks is generated by homogeneous training vectors. Before compression, an image is uniformly divided into 8${\times}$8 blocks. Low detail regions such as backgrounds are roughly coded by AVQ while high detail regions such as edges or curves are finely coded by the proposed MR-ICS-JPEG. This hybrid coder procuces consistently about 3 dB improved performance in terms of PSNR over standard JPEG.

• 품질경영학회지
• /
• 제21권1호
• /
• pp.199-213
• /
• 1993

The function-cost matrix table is not constant, but can be changed by many factors including equipment capacity, level of production technique, fluctuation of production volume, and the continuous development of products. Such changes would give the VE analysists additional work burden. By using computer. in this study, much of the time and effort of the function evaluation could be saved, and the efficiency of the analysis could also be enhanced. The application of the function evaluation data of R Company, as a case analysis, to the function evaluation computer program developed in this study resulted in the faster management of function-cost matrix table and function evaluation.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.66-70
• /
• 2010

Using two piezoelectric materials orthogonally arranged, 2-dimensional(2D) vibration in a excitation workpiece table was generated. In this study, micro milling using high frequency 2D vibration was proposed, whose locus of cutting tool is combined with original trochoid locus of milling tool and 2D elliptical locus of excitation table. From the cutting results of 2D vibrational micro milling of nickel alloy, it was observed that the machining quality and the roughness of machined surface were enhanced compared to conventional milling in a side cutting whose immersion ration is relatively low, whereas there was little betterment in a slot cutting.

• 한국문헌정보학회지
• /
• 제23권
• /
• pp.33-62
• /
• 1992

The purpose of this is to evaluate the contents through the anal us is of the merits and demerits, and its special quality of the Cutter-Sanborn Three-figure Author Table. table. The abstract of this study is as follows : With the results of the analysis of Cutter-Sanborn's Tabls, several advent-age were found in the area of enumerative-ordinal numbering system, mixed notation, and information retrieval. A defect is that each corporate author and serials and reference book's titles are difficult to be numbered, and there is serious diviation in percentages of the numbers assigned to each letter because each letter apportion rate was applied without any criteria. Such phenomenon decrease the effectiveness as author notation in several letters. The separation of headings are seriously unbalanced because the separation of heading is not consistent with actual publishing trends. This phenomenon made difficult individualization of materials in several letters.

• Journal of the Korean Wood Science and Technology
• /
• 제2권2호
• /
• pp.22-24
• /
• 1974

1. 연구의 목적 및 중요성. 우리나라 합판 공업은 우수한 제조 기술을 개발하므로서 합판 수출액은 매년 증가하여 드디어 세계 제1위의 합판수출국으로 등장하게 되었으나, 합판 이외의 각종 목재가공품의 수출은 극히 부진한 실정에 있음은 주로 목재가공기술 부족에 기인하는 것으로 분석되고 있다. 따라서 본 연주에 있어서는 수출용 목재 제품의 품질을 개선하므로서 수출 증대 촉진하기 위하여 목재 가공상 가장 기초적 부문에 속하는 목재 건조법을 규명한 것이다. 2. 연구의 내용 및 범위 습재(wet wood)를 사용하면 가공후 건조 수축하여 변형하고 또는 절삭(切削), 접착 및 도장(塗裝) 등에 있어서 각종의 피해를 유발하므로 이들의 피해를 방지하기 위하여 습재를 사용전에 반드시 건조하여야 한다. 따라서 수출용재로 그 사용량이 많은 감나무, 참나무, 라왕 및 라민등에 대한 건조법 및 그 건조결함을 규명하는 동시에, 우리나라의 목재건조공업 실태도 아울러 조사하였다. 3. 연구 결과 및 활용에 대한 건의 3.1 연구 결과 3.1.1 $100^{\circ}C$ ovendry에 있어시 목구활열형성 및 함수율 5%까지 건조하는데 소요되는 시간은 표 1과 같다. 3.1.2 두께 30mm 공시목을 표 2의 건조스케줄을 적용하여 건조한 결과는 표 3과 같다. 3.1.3 감나무 건조 스케줄은, 건조 특성이 정상인 공시목에 대하여는 표4 스케줄이 적합하고 활열성이 강한 것은 상온 아래 그 관계습도를 85% 이상으로 유지하면서 서서히 기건하여 그 함수율을 25%까지 감소한 후 인공건조하는 것이 안전하다. 3.1.4 각 수종에 대하여 규면된 건조 스케줄은 다음과 같다. 라만 건조 스케줄 표 5 및 표 6 라왕(메란티) 표 7 참나무 표 8. 3.2 활용에 대한 검의 본 연구 결과는 목재가공 관계업체에 널리 보급하여, 목재건조기술 개선 특히 건조결함 방지와 건조 시간 단축에 활용되기를 바란다.

• 한국관개배수논문집
• /
• 제12권1호
• /
• pp.15-27
• /
• 2005

Variation of groundwater level and groundwater quality are an important parameter in the basin analysis. The study of groundwater level and groundwater quality require a knowledge of the geology and the regions surface. We analyzed characteristics of chan

• 음성과학
• /
• 제10권3호
• /
• pp.241-250
• /
• 2003

In this paper, we implemented the vocoder of variable rate by applying the SOLA-B algorithm to the G.729A to the TMS320C5416 in real-time. This method using the SOLA-B algorithm is that it is reduced the duration of the speech in encoding and is played at the speed of normal by extending the duration of the speech in decoding. But the method applied to the existed G.729A and SOLA-B algorithm is caused the loss of speech quality in G.729A which is not reflected about length variation of speech. Therefore the proposed method is encoded according as it is modified the structure of LSP quantization table about the length of speech is reduced by using the SOLA-B algorithm. The vocoder of variable rate by applying the G.729A and SOLA-B algorithm is represented the maximum complexity of 10.2MIPS about encoder and 2.8MIPS about decoder in 8kbps transmission rate. Also it is evaluated 17.3MIPS about encoder, 9.9MIPS about decoder in 6kbps and 18.5MIPS about encoder, 11.1MIPS about decoder in 4kbps according to the transmission rate. The used memory is about program ROM 9.7kwords, table ROM 4.69kwords, RAM 5.2kwords. The waveform of output is showed by the result of C simulator and Bit Exact. Also, the result of MOS test for evaluation of speech quality of the vocoder of variable rate which is implemented in real-time, it is estimated about 3.68 in 4kbps.

• 한국작물학회지
• /
• 제60권4호
• /
• pp.470-474
• /
• 2015

공시된 교잡종에 대한 식물학적 특성, 잡종강세와 유전적 거리 및 종실특성에 대한 분석 결과는 공시 교잡종에 대한 간장은 CNU H09-26에서 228.5 cm, CNU H09-30에서135.2 cm 범위로 큰 변이를 나타냈으며, 착수고 역시 CNU H09-23에서는 78.2 cm, CNU H09-30에서 22.1 cm으로 교잡종간에 큰 차이를 보였다. 이삭길이는 공시종 중에서 CNU H09-26에서 21.2 cm로 가장 길었고 CNU H09-13에서 10.8 cm로 가장 작게 나타났다. 아밀로 그램의 특성 중에서 호화개시온도는 CNU H09-23의 $71.1^{\circ}C$로 가장 낮은 온도에서 호화가 시작되었으며 식미가 우수한 반면 CNU H09-7은 $76.0^{\circ}C$로 호화온도가 가장 높았다.