• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.837-842
• /
• 1999

The Ta/TaN multilayer structure with repeating layers of a poly-crystalline Ta layer of high ductility and a TaN layer of high hardness is expected to exhibit toughness. This paper reports the results on the hardness and the adhesion strength of Ta/TaN multilayers and compositional gradient Ta/TaN layers deposited on the high speed steel substrate by reactive sputtering as a function of annealing temperature. The TaN film deposited with the $N_2$/Ar ratio of 0.4 in the reactive sputtering process exhibits the highest crystallinity, and the highest hardness and the results of scratch test of the Ta/TaN multilayers. The hardness and adhesion strength of the Ta/TaN multilayers becomes deteriorated with increasing the annealing temperature in the heat treatment right after depositing the layers. Therefore, post-annealing treatments are not desirable in the case of the Ta/TaN multilayers from the standpoint of mechanical properties. Also the hardness of Ta/TaN multilayers increases with decreasing the compositional modulation wavelength, but the adhesion property of the layers is nearly independent of the wavelength. On the other hand, the compositional gradient Ta/TaN film exhibits the highest hardness and the value of scratch test for the post-annealing temperatures of 20$0^{\circ}C$ and 40$0^{\circ}C$, respectively. This tendency of the compositional gradient Ta/TaN films differs from that of the Ta/TaN multilayers.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.129-135
• /
• 1997

This study was carried out to investigate the influence of triacetin(TA) on some phisico-chemical properties of cigarette filter rods. To find the effect of TA on physical properties, we made six kinds of filters varying the TA levels(0%, 2%, 4%, 6%, 8%, 10%) and measured the hardness, resilience and roundness. The hardness of filter rods was increased from 83.2% to 94.6% with increasing the TA level hut the roundness was not affected by TA levels. After manufacturing the cigarette with the filters, we have analysed the delivery amount of phenol and TA with the content of TA. The amount of phenol was decreased from 20.6$\mu\textrm{g}$/cig. to 12.0 $\mu\textrm{g}$/cig. with increasing the TA level of the filters. The decreasing of phenol amount was thought to be caused by solution effect. Also the TA delivery of TPM was increased from 0% to 5% of TPM with increasing the amount of TA. We have found the interesting phenomena that ventilation rate was also decreasing up to 6oye with increasing TA. It seemed to be due to the encapsulated pressure drop and the reduction of the plugwrap porosity which also caused by the smear with TA on the surface of plugwrap. From this results, we could find that not only the hardness, resilience and ventilation rate but also the contents of phenol and TA in cigarette smoke was affected by the TA levels on the cigarette filter rods.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.256-257
• /
• 2014

The effects of the preparation conditions of ZnO-modified TaON on the photocatalytic activity for degradation of rhodamine B dye (Rh. B) under simulated solar light were investigated. The ZnO/TaON nanocomposite were prepared by loading particulate $Ta_2O_5$ with ZnO using different ZnO contents, followed by thermal nitridation at 1123 K for 5 h under $NH_3$ flow (20 ml min.1). The asprepared samples were characterized by XRD, UV-Vis-DRS, and SEM-EDX. The results revealed that the band gap energy absorption edge of as prepared nanocomposite samples was shifted to a longer wavelength as compared to ZnO and $Ta_2O_5$, and the 60 wt% ZnO/TaON nanocomposite exhibited the highest percentage (99.2 %) of degradation of Rh. B and the highest reaction rate constant ($0.0137min^{-1}$) in 4 h which could be attributed to the enhanced absorption of the ZnO/TaON nanocomposite photocatalyst. Hence, these results suggest that the ZnO/TaON nanocomposite exhibits enhanced photocatalytic activity for the degradation of rhodamine B under simulated solar light irradiation in comparison to the commercial ZnO, $Ta_2O_5$, and TaON.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.165-168
• /
• 2008

Ta-doped thin films were deposited on quartz and indium-tin oxide glass substrates using a co-sputtering method. The Ta-doped films formed a solid solution that induced structural changes from rutile to anatase phase. The anodic photocurrents of the Ta-doped $TiO_2$ electrodes were observed not only in UV but also in the visible light range. The photocurrent response in visible light on Ta-doped $TiO_2$ films are due to bandgap reduction.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.41-47
• /
• 1993

Effects of Ta addition on Co-Cr pependicular magnetic recording media were studied to obtain high perpen-dicular coercivity at lower substrate temperature. For the purpose. magnetic properties and microstructures of Co-Cr-(Ta) films were studied by varying the Cr contents from 17 to 21 at.% and Ta contents for 0 to 3.2 at.%. Effectiveness of Ta addition in increasing perpendicular coercivity was significant for lower Cr content films. The increasement of perpendicular coercivity was more pronounced for the films deposited on $100^{\circ}C$ heated substrate in the case of ${(Co_{83}Cr_{17})}_{98.4}Ta_{1.6}$ composition. The cause of the increase of perpendicular coercivity was considered due to not the grain refinement effects and the improvement of c-axis alignments but increase of Ta and Cr segregation.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.310-317
• /
• 2000

With use of (G)MR head, thermal asperity (TA) has been a big concern in drive industry. In this study, we investigated several factors of heads and disks which affects the TA sensitivity of the drive. TA experiments were conducted by introducing the particles on the drives using a particle injection chamber. It was found that the slider ABS shape can help to reduce TA or contamination in the head/media interface. However, TA sensitivity of the drive mainly depend on the intrinsic property of (G)MR sensor. GMR head is much less sensitive to TA compared with MR head. However, in case that the same bias current was applied for both of MR and GMR head, TA sensitivity of GMR head became almost identical to that of MR head. Therefore it was found that the bias current is a dominant factor in determining TA sensitivity of the head. TA sensitivity of different types of disks was also studied. The scratch resistance of the carbon overcoat layer is the one of the main factors which influence TA rejection capability of the disks.

• Journal of Surface Science and Engineering
• /
• v.38 no.2
• /
• pp.65-68
• /
• 2005

The effect of crystal orientation and microstructure on the mechanical properties of $TaN_x$ was investigated. $TaN_x$ films were grown on $SiO_2$ substrates by ultrahigh vacuum unbalanced magnetron sputter deposition in mixed $Ar/N_2$ discharges at 20 mTorr (2.67 Pa) and at $350^{\circ}C$. Unlike the Ti-N system, in which TiN is the terminal phase, a large number of N-rich phases in the Ta-N system could lead to layers which had nano-sized lamella structure of coherent cubic and hexagonal phases, with a correct choice of nitrogen fraction in the sputtering mixture and ion irradiation energy during growth. The preferred orientations and the micro-structure of $TaN_x$ layers were controlled by varing incident ion energy $E_i\;(=30eV\~50eV)$ and nitrogen fractions $f_{N2}\;(=0.1\~0.15)$. $TaN_x$ layers were grown on (0002)-Ti underlayer as a crystallographic template in order to relieve the stress on the films. The structure of the $TaN_x$ film transformed from Bl-NaCl $\delta-TaN_x$ to lamellar structured Bl-NaCl $\delta-TaN_x$ + hexagonal $\varepsilon-TaN_x$ or Bl-NaCl $\delta-TaN_x$ + hexagonal $\gamma-TaN_x$ with increasing the ion energy at the same nitrogen fraction $f_{N2}$. The hardness of the films also increased by the structural change. At the nitrogen fraction of $0.1\~0.125$, the structure of the $TaN_x$ films was changed from $\delta-TaN_x\;+\;\varepsilon-TaN_x\;to\;\delta-TaN_x\;+\;\gamma-TaN_x$ with increasing the ion energy. However, at the nitrogen fraction of 0.15 the film structure did not change from $\delta-TaN_x\;+\;\varepsilon-TaN_x$ over the whole range of the applied ion energy. The hardness increased significantly from 21.1 GPa to 45.5 GPa with increasing the ion energy.

• Corrosion Science and Technology
• /
• v.22 no.5
• /
• pp.368-376
• /
• 2023

Dental Ni-Ti files must ensure stability and resistance to fatigue fracture. DLC and ta-C were coated to remove defects on the surface and ensure stability, and the surface characteristics were investigated. When coated with DLC, it was black, and in case of ta-C coating, it was blue-black. Scratches, which are defects caused by mechanical processing, were formed on the surface of the un-coated Ni-Ti file from the end of the file along the direction of processing, with the Pro-file appearing in the vertical direction and the K-file appearing in the file direction. Scratches were reduced on the coated surface, and the surface roughness was greatly reduced after coating compared to before coating. The un-coated Ni-Ti file had the lowest hardness, the DLC-coated file had the highest hardness, and ta-C showed relatively high hardness. The elastic modulus of the DLC coating film was high, and the ta-C elastic modulus was low. The adhesion of the DLC coating film tended to be higher than that of ta-C, and the wear loss amount of DLC coating of taC was lower. The corrosion potential of the ta-C coating increased significantly, and the corrosion current density decreased.

• Journal of Food Hygiene and Safety
• /
• v.15 no.4
• /
• pp.297-303
• /
• 2000

Gamma irradiation at 20 kGy was applied to Kanjang (soy sauce), Doenjang (soybean paste), Kochujang (hot pepper pasts) and Chungkukjang for their possible genotoxicity. The genotoxicity of 20 kGy-irradiated samples was evaluated by Salmonella typhimurium reversion assay. The Salmonella tester strains included TA98, TA100, TA1535 and TA1537 in the absence and presence of an exogenous metabolizing system (59 mix). All samples were negative in the bacterial reversion assay with S. typhimurium TA98, TA100, TA1535 and TA1537. The results indicated that 20 kGy of gamma irradiation on water-soluble fraction of Kanjang, Doenjang, Kochujang and Chungkukjang were not shown mutagenicity.

• Journal of Korean Academy of Nursing
• /
• v.27 no.3
• /
• pp.520-530
• /
• 1997

Antineoplastic agents may exhibit effects not only in patients therapeutically exposed, but also in health workers who prepare and administer these drugs. This study was done to clarify whether nurses who handle anticancer drugs show signs of drug absorption. The experimental group was 14 nurses handling anticancer drugs at three medical wards of a hospital in J city ; the control group was 12 psychiatric nurses at the same hospital. The test materials were the nurses' 24hr urine specimens, which were concentrated by XAD-2 column chromatograpy. Tester strains were TA98(±S9mix), TA100(±S9 mix), TA1535(±S9 mix) and TA1537(±S9 mix) : the salmonella mammalian microsomal test (Ames test) was used for the urinary mutagenicity assay. The results are summarized as follow : 1. In qualitative analysis of the results, both experimental group and control group showed 15.4% urine toxicity. 2. The experimental group revealed significantly higher urinary mutagenicity both in the activation method test and non-activation method test of the tester strains TA98, TA100 and TA1535. In the case of TA1537, the two groups showed no difference in the non-activation method test, but the activation method revealed a difference. 3. In urinary mutagenicity of the experimental group by ward career, there was a significant difference between the group with more than 20 months experience and the group with less than 20 months on the tester strains TA98, TA100, and TA1537. No Significant difference was found between two groups by the tester strain TA1535.