• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.61-71
• /
• 2006

The main purpose of this study is to search a method for reducing traffic accident at signalized intersections. One of the important factors for this is the Left-turn phase sequence. In 1985, the operational principle of Left-turn phase Sequence was changed from Lagging left-turn to Leading left-turn in Korea. Then there was a resonable motive-no exclusive left turn-lane and narrow intersection. So, it is necessary to evaluate the performance difference between Leading and Lagging left -turn phase Sequence. The process of this study is as follows: $\cdot$ First, all the intersection was divided three parts for analysis the traffic safety: Inside part of an Intersection, Crosswalk, Intersection approach and exit. $\cdot$ Second, a safety analysis was performed by using the concepts of 'Effective interphase Period(EIP)' and 'Conflict method' The Study result is that the benefit of of phase Sequence changes from Leading to Lagging phase were significant. For an example the Accident cost will reduced about 41.8 billion won per year in korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.153-164
• /
• 2018

Calculating the relevant length of left turn storages in urban intersections is very crucial in road designs. A left turn lane consists of deceleration lanes and left turn storages. In this study, we developed methods for calculating relevant lengths of left turn storages that vary at each intersection using UAV (Unmanned Aerial Vehicle) spatial images. Problems of conventional design techniques are applying the same number of left turn vehicles (N) using Poisson distribution without considering land use types, using a vehicle length that may not be measurable when applying the length of waiting vehicles (S), and using same storage length coefficient (${\alpha}$), 1.5, for every intersections. In order to solve these problems, we estimated the number of left turn vehicles (N) using an empirical distribution, suggested to use headways of vehicles for (S) to calculate the length of waiting vehicles (S) with a help of using UAV spatial images, and defined ranges of storage length coefficient (${\alpha}$) from 1.0 to 1.5 for flexible design. For more convenient design, it is suitable to classify two cases when possible to know and impossible to know about ratio of large trucks among vehicles when planning an intersection. We developed formula for each case to calculate left turn storage lengths of a minimum and a maximum. By applying developed methods and values, more efficient signalized intersection operation can be accomplished.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.29-37
• /
• 2010

This study deals with the Right-Turn Bypass Lane in Roundabout. The purpose of the study is to comparatively analysis the effectiveness questions on the installation of right-turn bypass lane in roundabout. In pursuing the above, this study analyzed after and before of the right turn bypass lane plan by VISSIM software. The right turn bypass lane is formed by control type of yield and control type of joint were compared and analyzed the effects of the operation. The main results analyzed are as follows. First, after Right-Turn Bypass Lane is Installed, the traffic volume rate of the right-turn increasing by average delay time per vehicle is on the gradual decrease, maximum average about 28% with the fact that decreases. Second, control type of yield and control type of joint are both average delay time per vehicle decreasing by the traffic volume rate of the right-turn is on the gradual increase. Control type of joint was analyzed with the fact that has the maximum average about 18% delay decrement efficiency.

• Phonetics and Speech Sciences
• /
• v.14 no.2
• /
• pp.29-38
• /
• 2022

This study aimed to analyze the speech appearing in the National Institute of Korean Language's Daily Conversation Speech Corpus (2020) and reveal how the speech rate and the frequency of turn-taking affect the change in prosody units. The analysis results showed a positive correlation between intonation phrase, word phrase frequency, and speaking duration as the speech speed increased; however, the correlation was low, and the suitability of the regression model of the speech rate was 3%-11%, which was weak in explanatory power. There was a significant difference in the mean speech rate according to the frequency of the turn-taking, and the speech rate decreased as the frequency of the turn-taking increased. In addition, as the frequency of turn-taking increased, the frequency of intonation phrases, the frequency of word phrases, and the speaking duration decreased; there was a high negative correlation. The suitability of the regression model of the turn-taking frequency was calculated as 27%-32%. The frequency of turn-taking functions as a factor in changing the speech rate and prosodic units. It is presumed that this can be influenced by the disfluency of the dialogue, the characteristics of turn-taking, and the active interaction between the speakers.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.351-354
• /
• 2001

In this paper, we present self-tuning control of switched reluctance motor for maximum torque with phase current and shaft position sensor. Determination method of turn-on/off angle is realized by using self-tuning control method. During the sampling time, micro-controller checks the number of pulse from encoder and compare with the number of pre-checked pulse. After micro-controller calculates between two data, it moves forward or backward turn-off angle. When the turn-off angle is fixed optimal turn-off angle, the turn-on angle automatically moves forward or backward by a step using self-tuning control method. And then, optimal turn-off angle is searched once again. As such a repeating process, turn-on/off angle is moved automatically to obtain the maximum torque. The experimental results are presented to validate the self-tuning algorithm.

• Journal of Korean Society of Transportation
• /
• v.14 no.3
• /
• pp.45-59
• /
• 1996

The shortest path algorithm for route guidance is implicitly required not only to support geometrical variations of transportation network such as U-TURN or P-TURN but to efficiency search reasonable routes in searching mechanism. The purpose of this paper is to integrate such two requirements ; that is, to allow U-TURN and P-TURN possibilities and to cut down searching time in locating routes between two points (origin and destination) in networks. We also propose a new type of link searching algorithm which can solve the limitation of vine building algorithm at consecutively left-turn prohibited intersections. The test site is a block of Gangnam road network that has some left-turn prohibited and allowed U-TURN intersections. Four models have been identified to be comparatively analyzed in terms of searching efficiency. The Models are as follows : (i) Model 1 - Link Searching Dijkstra Algorithm without Searching Area Extraction (SAE) ; (ii) Model 2 - Link Searching Dijkstra Algorithm with SAE ; (iii) Model 3 - Link Searching Bidirectional Dijkstra Algorithm without SAE ; and (iv) Model 4 - Link Searching Bidirectional Dijkstra Algorithm with SAE. The results of comparative evaluation show that Model 4 can effectively find optimum path faster than any other models as expected. Some discussions and future research agenda have been presented in the light of dynamic route guidance application of the urban ATIS.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.73-85
• /
• 1999

In metropolitan area, intersections having turn Prohibitions are often found and it is important to consider them in path planning. This Paper presents a new path planning method road networks having turn prohibitions. A new road network model is proposed in which an alter-native route for each turn-Prohibition is constructed in off-line using U-turn or P-turn and then Put into road network database. The proposed network model is efficient since it requires no virtual nodes that are usually used in the conventional road networks to represent turns at intersections. In order to find a shortest path with the proposed network, a new shortest path algorithm is proposed. A knot for the turn-Prohibited node is newly defined and is used in comparing the cost of the alternative route with that of the other path.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.1 s.19
• /
• pp.93-99
• /
• 2006

In the inner turn key constructions the problems of uniform types are repeatedly occurred, and, especially, many problems happen up to the stage of pre-construction(from a bid to a contract) owing to the specialties of the turn key constructions. So the claim factors of the Korean turn key constructions were abstracted through the literature searches, the site document examinations, the case studies and the interviews with the experts. When the technicians meeting the interior turn key constructions for the first time and working here now are well acquainted with only these factors, many claims will be prevented. By analysing the degree of claims by claims factors through the questionnaires to the experts about the abstracted factors and surveying the amount of the claims through the case studies, what factors exerted how much of influence on the claims was tested and analyzed. Proposing the response devices to the factors affecting the claims much led the technicians in charge of internal turn key constructions to the prevention and the proper solution of the site claims.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.3
• /
• pp.267-273
• /
• 2004

The purpose of this paper is to develop a systematic design method for the suspension system hard points and compliance elements, which have great influence on the handling stability of a vehicle. In this paper, a method to optimize J-turn responses is presented based on the principles of design of experiments, multi-body dynamic analysis and optimum design technique. The design variables associated with the J-turn maneuver are selected through the experimental design sensitivity analysis using the perturbation method. An objective function is defined as an approximate function for the J-turn characteristics using the TSA(Taylor series approximation). The values of the design variables, which make the optimized J-turn characteristics, are obtained using the conjugate gradient method. The result of the J-turn simulation shows that the optimized vehicle has more improved handling stability than the optimized vehicle.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.17-31
• /
• 2003

This study is about throughput analysis of the shared right turn lane at signalized intersection with lane width change. It is expected that the increased width of the right turn shared lane causes to increase the volume of right turn on red(RTOR) In this study, the throughput computation is designed to take into account the lost time which is caused by the blocked right turn due to the stop of through traffic. The saturation flow rate of right turn using the rest of lane after through traffic stops is included as well. Results show that the different RTOR volume levels due to the various shared lane width leads to a difference in throughput. For the shared right turn lanes. throughput capacity for various lane widths is bigger than that of the KHCM as much as from 1.1 to 2.1 times.