• Title/Summary/Keyword: TRcM

Search Result 23, Processing Time 0.024 seconds

Linearity-Distortion Analysis of GME-TRC MOSFET for High Performance and Wireless Applications

  • Malik, Priyanka;Gupta, R.S.;Chaujar, Rishu;Gupta, Mridula
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.11 no.3
    • /
    • pp.169-181
    • /
    • 2011
  • In this present paper, a comprehensive drain current model incorporating the effects of channel length modulation has been presented for multi-layered gate material engineered trapezoidal recessed channel (MLGME-TRC) MOSFET and the expression for linearity performance metrics, i.e. higher order transconductance coefficients: $g_{m1}$, $g_{m2}$, $g_{m3}$, and figure-of-merit (FOM) metrics; $V_{IP2}$, $V_{IP3}$, IIP3 and 1-dB compression point, has been obtained. It is shown that, the incorporation of multi-layered architecture on gate material engineered trapezoidal recessed channel (GME-TRC) MOSFET leads to improved linearity performance in comparison to its conventional counterparts trapezoidal recessed channel (TRC) and rectangular recessed channel (RRC) MOSFETs, proving its efficiency for low-noise applications and future ULSI production. The impact of various structural parameters such as variation of work function, substrate doping and source/drain junction depth ($X_j$) or negative junction depth (NJD) have been examined for GME-TRC MOSFET and compared its effectiveness with MLGME-TRC MOSFET. The results obtained from proposed model are verified with simulated and experimental results. A good agreement between the results is obtained, thus validating the model.

A study on hydraulic back analysis for an urban tunnel site and stability analysis based on hydro-mechanical coupling analysis (도심지 터널 용출수 발생구간에서의 수리 역해석 및 수리-역학 연계해석을 통한 안정성 해석 연구)

  • Park, Inn-Joon;Song, Myung-Gyu;Shin, Uyu-Soung;Park, Yong-Su
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.10 no.4
    • /
    • pp.397-404
    • /
    • 2008
  • Excessive amount of groundwater flowed into tunnel, while constructing Incheon international airport railway. Tunnel passes under subway line no. 2 with only 1.76 m below. To protect the existing structure, TRcM excavation method was applied. As station and construction shaft are already constructed, which are located back and forth of TRcM section, 86.4 ton per day of groundwater inflow is against expectation. To identify mechanism of excessive water inflow, hydraulic back analyses were performed. Then, hydro-mechanical coupled analysis were also performed with the hydrogeologic parameters identified, whose results are investigated for checking the stability of adjacent structures to the tunnel under construction. And a number of mechanical analyses were also performed to check the hydro-mechanical coupling effect. The result from the mechanical analysis shows that subsidence and tunnel ceiling displacement will be 0.85 mm and 1.32 mm. The result of hydro-mechanical couple analysis shows that subsidence and maximum tunnel ceiling displacement will be 1.2 mm and 1.72 mm. Additional displacements caused by groundwater draw down were identified, however, displacement is minute.

  • PDF

Effect of parameters on the tensile behaviour of textile-reinforced concrete composite: A numerical approach

  • Tien M. Tran;Hong X. Vu;Emmanuel Ferrier
    • Advances in concrete construction
    • /
    • v.16 no.2
    • /
    • pp.107-117
    • /
    • 2023
  • Textile-reinforced concrete composite (TRC) is a new alternative material that can satisfy sustainable development needs in the civil engineering field. Its mechanical behaviour and properties have been identified from the experimental works. However, it is necessary for a numerical approach to consider the effect of the parameters on TRC's behaviour with lower analysis duration and cost related to the experiment. This paper presents obtained results of the numerical modelling for TRC composite using the cracking model for the cementitious matrix in TRC. As a result, the TRC composite exhibited a strain-hardening behaviour with the cracking phase characterized by the drops in tensile stress on the stress-strain curve. This model also showed the failure mode by multi-cracking on the TRC specimen surface. Furthermore, the parametric studies showed the effect of several parameters on the TRC tensile behaviour, as the reinforcement ratio, the length and position of the deformation measurement zone, and elevated temperatures. These numerical results were compared with the experiment and showed a remarkable agreement for all cases of this study.

Anti-inflammatory effect of new calcium hydroxide paste containing silicon-substituted hydroxyapatite in lipopolysaccharide-stimulated macrophages

  • Roh, Ji-Yeon;Kim, Ki-Rim
    • Journal of Korean society of Dental Hygiene
    • /
    • v.18 no.4
    • /
    • pp.423-432
    • /
    • 2018
  • Objectives: Calcium hydroxide, a root canal temporary sealer, has long been used and it has anti-bacterial and anti-inflammatory activity. To investigate the properties of a newly developed calcium hydroxide paste comprising silicon-substituted hydroxyapatite (Si-HA), we examined the anti-inflammatory activity of the new calcium hydroxide paste in RAW 264.7 macrophages stimulated by lipopolysaccharide (LPS), which causes infection of the root canal. Methods: The test materials, including Calcipex II as control group and the newly developed TRC paste, were extracted from cell culture media and then diluted for experiment. In LPS-stimulated RAW 264.7 cells, the cytotoxicity and nitric oxide (NO) production of test materials were measured by MTT assay and Griess reagents, respectively. Also, the expression of the inducible nitric oxide synthase (iNOS) was assessed by western blotting. Results: The IC50 values of Calcipex II and TRC paste were $17.6mg/m{\ell}$ and $13.5mg/m{\ell}$, respectively. The level of NO, increased by LPS, was dose-dependently inhibited more by TRC paste than Calcipex II treatment. In addition, iNOS expression was decreased by 71% and 92% at concentrations of $2mg/m{\ell}$ and $20mg/m{\ell}$ of TRC paste, respectively. Conclusions: We demonstrated that the Si-HA calcium hydroxide paste has a slightly improved anti-inflammatory property and further studies are needed before clinical recommendations are proposed.

A study of signal control with COSMOS on National Highway (신신호시스템(COSMOS)의 일반국도 적용에 대한 연구)

  • Baek Hyon-Su;Kim Young-Chan;Moon Hak-Yong;Kim Jong-Sik
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.3 no.2 s.5
    • /
    • pp.29-40
    • /
    • 2004
  • The performance of the National Highway is raised, but the capacity of the signalized intersection on the National Highway is low. It's operated by TOD(Time Of Day) mode. To evaluate of the performance of COSMOS(Cycle, Offset, Split Model for Seoul), a real time traffic adaptive signal control system, on the National Highway, studied volume, travel time and queuing length at TOD control and TRC(Traffic responsive Control). Consequently, the average travel speed at TRC is high $2.9\~16.7$km/h then the average travel speed at TOD control. And te queuing length at TRC is low $15\~196m$ then the queuing length at TOD control.

  • PDF

Effect of Acid Soaking and Thermal Sterilization on the Shape and Quality Characteristics of Tteokbokki Rice Cake (산침지와 가열 살균이 떡볶이 떡의 형상 변화와 품질 특성에 미치는 영향)

  • Jung, Hwabin;Yu, Chae Rin;Park, Hyeon Woo;Yoon, Won Byong
    • The Korean Journal of Food And Nutrition
    • /
    • v.31 no.5
    • /
    • pp.737-750
    • /
    • 2018
  • Effects of acid soaking (AS) and thermal sterilization (TS) on the shape and quality characteristics of Tteokbokki rice cake (TRC) were investigated. The F-value of a sequential process (SP) of the combination of AS and TS was quantitatively determined with a reference microorganism of Bacillus cereus. F-values were evaluated according to the minimum and the maximum D-value of B. cereus and the reduction exponent (m=12). The heat penetration curves at cold point (CP) of TRC (400 g) were used to estimate the TS time at 121, 100, and $95^{\circ}C$. F-values of the SP were revised according to the adjusted m values after AS at different pH. The non-uniformity parameters (NUP) of TRC had no significant changes during AS but it dramatically increased after applying TS at a low pH by AS. The result of solubilized starch contents (SSC) demonstrated that the shape changes during SP are related to SSC. The texture characteristics and the whiteness were significantly influenced by a low pH condition (3.5) (p<0.05). Sensory analysis showed that a lower pH and a longer thermal processing time influenced negatively on the acceptability. This study showed that pH 4.0 and $95^{\circ}C$ was an optimum condition for the SP.

Metabolic Flux Distribution in a Metabolically Engineered Escherichia coli Strain Producing Succinic Acid

  • Hong, Soon-Ho;Lee, Sang-Yup
    • Journal of Microbiology and Biotechnology
    • /
    • v.10 no.4
    • /
    • pp.496-501
    • /
    • 2000
  • Escherichia cole NZN111, which is known as a pfl ldhA double mutant strin, was metabolically engineered to produce succinic acid by overexpressing malic enzyme into the E. coli controlled by a trc promoter. Fermentation studies were carried out in a LB medium by first growing cells aerobically to an $OD_{600}$ of 5. At this point, 0.01 mM IPTG was added to induce the overexpression of malic enzyme and the agitation speed was gradually lowered. When the culture $OD_{600}$ reached 11, a complete anaerobic condition was achieved by flushing with a $CO_3-H_2$ gas mixture. When NZN111(pTrcML) was cultured at $37^{\circ}C$, the final succinic acid concentration of 2.8 g/l could be obtained after 30 h of anaerobic cultivation. The fermentation results were analyzed by the calculation of metabolic fluxes. Metaolic flux analysis showed that about 85% of phosphoenolpyruvate (PEP) was converted to pyruvate, and further converted to malic acid by malic enzyme.

  • PDF

Railway Undercrossing Construction Method for the Shindorim Station Platform Extension (신도림 역사 확장을 위한 철도횡단 건설공법 검토)

  • Yoo, Je-Nam;Koo, Ja-Kap;Lee, Hee-Yung
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.887-890
    • /
    • 2008
  • Shindorim Station is the most important transfer station which is crossed Seoul Metro Line-2 and national rail traffic Kyungbu, Honam and Kyungin Line etc.. There is the lagest transfer passengers and the greatest rail traffic. Therefore to solve the congeted station problem, Shindorim station extension project has been planned. This project has very difficult many problems. One of them is undercrossing the national rail traffic ground without open-cut excavation. There are many undercrossing construction methods in our country. But this project is required the best safety. So the best applicable methods are investigated, which are Front-Jacking, NTR and TRcM. In Design stage Front-Jacking with PRS method which is gound reinforcing is applied.

  • PDF

Indoor Location-based Emergency Call Service System for Ships using VLC Technology (가시광통신을 이용한 선박 내 위치 기반 응급호출 시스템)

  • Hong, Seung-Beom;Lee, Kyou-Ho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.12
    • /
    • pp.2836-2843
    • /
    • 2015
  • Due to metallicity of materials, a vessel has a limitation to adopt RF-based wireless communication technologies for the inner communication means. Visible Light Communication(VLC) can be a sound alternative to dissolve such a limitation. Using a visual light as a transmission medium, VLC is free from radio interferences and restriction of radio usages which are typically related to RF-based wireless communications. In addition, VLC can not only require the facility cost relatively low because of being possibly converged with existing LED illumination, but also be harmless to the human body. This paper proposes an indoor location-based emergency call service system solution for ships using the VLC technology that supports 256Kbps data rate and 5m transmission distance. This paper presents real implementation and testing results of the solution which verifies the propriety of the proposal.

Expression of Serratia marcescens Metalloprotease(SMP)Gene in Escherichia coli and Serratia marcescens (대장균과 Serratia marcescens에서 Serratia marcescens Metalloprotease(SMP) 유전자의 발현)

  • Kim, Ki-Seok;Jung, Jae-Yeon;Park, Kun-Sik;Kim, Tae Un;Byun, Si Myung;Shin, Yong Chul
    • Microbiology and Biotechnology Letters
    • /
    • v.23 no.3
    • /
    • pp.288-296
    • /
    • 1995
  • To investigate high-level expression of Serratia marcescens metalloprotease (SMP) in Escherichia coli and S. marcescens, we constructed various recombinant plasmids: pSP2, containing SMP gene and lac promoter; pKSP2, containing SMP gene and tac promoter; pTSP2, containing SMP gene, trc99a promoter, and lacI$^{q}$. The recombinant E. coli (pKSP2) strain expressed SMP to a high-level, about 36% of total cellular proteins but accumulated inactive SMP precursors intracellularly, which indicated that E. coli does not have activation and secretion system for SMP. To overproduce active SMP, we transformed S. marcescens with the recombinant plasmids by a modified CaCl$_{2}$ method. The recombinant S. marcescens ATCC27117 (pSP2) containing lac promoter for SMP transcription produced 530 U/ml of active SMP on LB broth, which is about 5.1 times of the SMP yield, 105 U/ml of a control strain, S. marcescens ATCC27117 (pUC19). However, S. marcescens ATCC27117 (pKSP2) containing tac promoter for SMP transcription did not grow healthy and hardly produced SMP. To overcome a harmful effect of the strong tac promoter, we constructed a regulatory plasmid pTSP2 containing a strong trc99a promoter and its repressor gene lacI$^{q}$. When S. marcescens ATCC27117 (pTSP2) was induced with 1.0 mM IPTG after 9 hr cultivation, 2,200 U/ml of SMP was obtained in LB broth, which is about 21 times of that of a control strain.

  • PDF