• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.367-375
• /
• 2017

RANS computational analysis was performed on the head of the launch vehicle including the hammerhead nose pairing in the supersonic regime. The two-dimensional axisymmetric analysis was performed by using laminar, fully turbulent and transition models and compared with the experimental data. It was observed that different flow phenomena occurred depending on the Reynolds number. Under the high Reynolds number condition, the boundary layer becomes turbulent, which is not separated from the surface of the launch vehicle. With the low Reynolds number condition, laminar separation bubble was produced due to the separation and reattachment of the boundary layer on the expansion-compression edge of the hammerhead type nose fairing. The three-dimensional computations with the angle of attack showed a fully detached vortical structure due to the laminar separation bubble. It is proved that the turbulent transition should be considered to predict the separation bubble with the Reynolds number.

• The KIPS Transactions:PartA
• /
• v.9A no.1
• /
• pp.61-74
• /
• 2002

This paper presents a method which synthesizes asynchronous circuits from free-choice Signal Transition Graphs (STGs) with timing constraints. The proposed method synthesizes asynchronous circuits by analyzing: the relations between signal transitions directly from the STGs without generating state graphs. The synthesis procedure decomposes a free-choice STG into deterministic STGs which do not have choice behavior. Then, a timing analysis extracts the timed concurrency and tamed causality relations between any two signal transitions for each deterministic STG. The synthesis procedure synthesizes circuits for each deterministic STG and synthesizes the final circuit by merging the circuits for each deterministic STG. The experimental results show that our method achieves significant reductions in synthesis time for the circuits which have a large state space, and generates circuits that have nearly the same area as compared to previous methods.

• Economic and Environmental Geology
• /
• v.18 no.2
• /
• pp.139-150
• /
• 1985

Skarn at the Dielette formed largely in calc-silicate hornfels at the contact with the Flamanville granite. The skarn consists mainly of garnet and pyroxene, and less frequently vesuvianite. Traversing toward calc-silicate hornfels wall rock from a central zone of the skarn, the general sequence of formation of mineral assemblages is: (1) dark brown garnet (2) pale brown garnet-vesuvianite-pyroxene, and (3) pyroxene-prehnite-scapolite-wollastonite envelopes (designated as transition zone) developed between skarn and calc-silicate hornfels. The central zone of the skarn consists mainly of dark brown garnets (garnet I) that contain little or no pyroxene. The pale brown garnet (garnet II) is associated with pyroxene and vesuvianite. The sequence of these garnets results from the zonal growth outward. There is an abrupt discontinuity in composition between garnet I formed in early stage and garnet II in late stage, while each garnet shows relatively uniform composition. At the zone in contact with the granite, the iron contents of garnets decrease toward the marginal zone of the skarn, from an average value of 36 mole % andradite in garnet I to 18 mole % andradite in garnet II. At the zone distant from the granite, the andradite component decreases from 28 mole % in garnet 1 to 19 mole % in garnet II. The variation of the iron contents of pyroxenes is also similar to that of garnets. The sharp discontinuity in composition of garnets and pyroxenes suggests that the skarn of study area was formed by infiltration metasomatic process. The results of the analyses of mineral assemblages of the transition zone by chemical potential diagrams suggest that the transition zone was made by the diffusion of the elements Ca, K and Fe from the skarn to the calc-silicate hornfels contact zone. The estimated temperatures and $Xco_2$ for the formation of the transition zone show $300^{\circ}C$$440^{\circ}C$ and $0.07{\pm}0.05<Xco_2<0.02{\pm}0.01$ at 1 Kb respectively.

• International Area Studies Review
• /
• v.12 no.3
• /
• pp.3-23
• /
• 2008

We investigated the effects of policy reform, industrial transformation, and initial conditions on the agricultural productivity changes in 28 transition countries. Our findings are: (i) Asian and CEE transition countries performed better than CIS countries, while the performance improvement of CEE countries seems to be more prominent compared to that of Asian and CIS countries; (ii) The technical progress proved to be the main source of productivity growth, particularly in CEE countries; (iii) Reform policy and industrial transformation seems to have positive effects on the performance of agricultural sector and its changes; (iv) The initial conditions also matter.

• Journal of Convergence for Information Technology
• /
• v.9 no.3
• /
• pp.82-89
• /
• 2019

The reason why NCS education is conducted in college is because students are expected to improve their skills through practical education. In addition, NCS education is expected to have a positive impact on job competence and competitiveness. The purpose of this study is to explain the necessity of NCS education, and to analyze whether the education transition and practical performance are manifested. For this purpose, the research model was composed of "NCS Education ${\Rightarrow}$ Educational Transition ${\Rightarrow}$ Practical Results" and surveyed about 300 college students in the metropolitan area. If NCS education is necessary in practice, colleges and other educational institutions should plan to make NCS education operate efficiently. As a analysis result, it was confirmed that the internal consistency was secured and both the intensive validity & discriminant validity were confirmed in the validity. As a result of using the structural equation model, this research model was found to be suitable. As a result of the hypothesis test, it is analyzed that the standardization coefficient of the research hypothesis is above the appropriate level and the correlation is highly formed.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.29-35
• /
• 2024

The recycling of waste resources, such as spent catalysts, primarily involves leaching and extracting metal components via smelting. These metal components are then recovered as salts, such as sulfates and nitrates. When crystallization occurs during the calcination of the recovered salts, the salts are converted into oxides, which are then reduced to form metals or ceramic materials. Common reducing agents used in oxide reduction include hydrogen and carbon, and metal powders are obtained upon reduction. Carbide synthesis can occur if the recycled element is a transition metal and carbon is used as the reducing agent. Despite being ceramic materials, transition metal carbides exhibit excellent conductivity owing to their metallic bonding. Recently, MXene, a two-dimensional transition metal carbide, has gained attention for electromagnetic wave shielding, secondary battery electrodes, and water purification owing to its electrical conductivity and large surface area. This study developed a process for synthesizing high-value MXene materials from waste resources. The properties of these MXenes were evaluated to confirm the potential of using waste resources as raw materials for MXenes.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.47-55
• /
• 1999

In this paper, a new function hazard elimination algorithm is proposed for asynchronous circuit synthesis. In previous approach, function hazard is eliminated by using state graph which is obtained from the state assignment on STG(signal transition graph) representing transition relationship among signals. These algorithms can use conventional hazard removal and synthesis method applied in synchronous system, but it has much computational complexity and takes much time to handle the state graph. Although some hazard elimination algorithm from STG were proposed, it could not reduce the area overhead due to the addition of new signals. The proposed algorithm eliminate function hazard directly on STG and also control the number of minterms and product-term of added signal in order to minimize the area overhead. Experimental results on benchmark data shows that overall circuit area after hazard elimination is decreased about 15% on the average than that of previous method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.3
• /
• pp.72-87
• /
• 2000

The purpose of this research was analysis of biotope structure focused on the evaluation for the nature experience and recreation in the case of Suseoung District in Daegu metropolitan area. The results of this study were as follows; 1) The result of biotope type classification was divided into 17 biotope type groups and 90 biotope types belonging to them. 2) In the result of the first evaluation for the nature experience and recreation, biotope types such as MA, NA, OE, PH, QB etc. possess great value. Particulary these biotope types come from forest areas and transition zone. The have not appeared in the inner of cities. 3) The biotope types such as JC, ME, OA, OE, PB, QD, QF etc. are proved to possess high value in the result of the utility evaluation. 4) There emerges 3a biotope type that has the highest value in the result of the second evaluation - such as ME, NB, NC, PD, QB etc. Most of them range widely except in the urbanized areas. Most of them were presented into the large area of site size and in the outer forest areas. But most of them were distributed in the forest areas intensively. So, it is certain that the space of nature experience connected with residential district of the urban people s scarce. Finally, the detailed plan must be made out specially continuously. It is about biotope spaces that are important for the nature experience and the recreation from the result of this research. Also, the study on the detailed index settlement of the sight green plan based on the biotope map must be continued.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.1
• /
• pp.139-154
• /
• 2015

This paper uses the Heckman model to evaluate the income difference between the public sector and the private sector based on the CHNS data. The research finds that the difference of the public sector versus the private sector between the west area and the east area is about 10% from 1989 to 2000, the transition of the income difference is smooth, that data has made sharp increase to 32% from 2000 to 2011. Considering the income difference between the west area and the central area, the central area and the east area from 1989 to 1997, the data is about 10~15%, from 2000 to 2011 is rocketing time, the data reaches 20%. This paper is very revealing about the income difference ofthe public sector versus the private sector is increasing year after year, and the economy is developing rapidly but with imbalance among different areas in China. It would provides the reference for adjust the income distribution system in future.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.7
• /
• pp.92-101
• /
• 1993

This paper describes algorithms to extract license plates in vehicle images. Conventional methods perform preprocessing on the entire vehicle image to produce the edge image and binarize it. Hough transform is applied to the binary image to find horizontal and vertical lines, and the license plate area is extracted using the charateristics of license plates (the boundary information of license plates). Problems with this approach are that real-time processing is not feasible due to long processing time and that the license plate area is not extracted when lighting is irregular such as at night or when the plate boundary does not show up in the image. This research uses the gray level transition characteristics of license plates to verify the digit area by examining the digit width and the gray level difference between the background area the digit area, and then extracts the plate area by testing the distance between the verified digits. This research solves the probelm of failure in extracting the license plates due to degraded plate boundary as in the conventional methods and resolves the provlem of the time requirement by processing in real time such that practical application is possible.