• Spatial Information Research
• /
• v.18 no.3
• /
• pp.13-22
• /
• 2010

Due to the frequent gales and typhoons by anomaly climates and its subsequent loss of life and property, the importance of the research estimating wind load is being emphasized when structure is designed. It is necessary to measure geographical information exactly to estimate topographic factor of wind speed because the increase of topographic factor of wind speed means the increase of wind velocity and the increase of wind velocity has an influence on wind load proportionate to a square. Therefore, the accurate and reasonable estimation method of topographic factor of wind speed is presented in this study using ArchiCAD, an architectural BIM(Building Information Modeling) software. When the structure subjected to wind load is designed, reasonability and economic performance of design will be more improved by using the proposed method.

• Genomics & Informatics
• /
• v.1 no.1
• /
• pp.32-39
• /
• 2003

We present a latent variable model-based approach to the analysis of gene expression patterns, coupled with topographic clustering. Aspect model, a latent variable model for dyadic data, is applied to extract latent patterns underlying complex variations of gene expression levels. Then a topographic clustering is performed to find coherent groups of genes, based on the extracted latent patterns as well as individual gene expression behaviors. Applied to cell cycle­regulated genes of the yeast Saccharomyces cerevisiae, the proposed method could discover biologically meaningful patterns related with characteristic expression behavior in particular cell cycle phases. In addition, the display of the variation in the composition of these latent patterns on the cluster map provided more facilitated interpretation of the resulting cluster structure. From this, we argue that latent variable models, coupled with topographic clustering, are a promising tool for explorative analysis of gene expression data.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.126-135
• /
• 2013

With more than 70% of the country consisting of mountains, Korea has large and small mountains, and hills located in the inner cities. Therefore, Korea's architectural structure laws stipulate that an increase in wind speed due to the influence of terrain should be considered in the design of wind loads of buildings. But if more than two mountains are located around the building or if the boundaries of the land surface are not clear when calculating topographic factors of wind speed, the designer has subjectively selected the coverage of the topographic factors of wind speed or the surface. This may lead to unscientific design of wind loads. This study attempts to analyze topographic factors of wind speed by using a 1:5000 topographic map with relatively high location accuracy and thereby to reflect changes due to the topographic characteristics and influence at the point where the building is located. By also selecting terrain surfaces and vertexes through Arc GIS and presenting a scientific approach to determine the range of topographic factors of wind speed, this study is expected to make a contribution for more rational and cost-effective wind-resistant design of buildings.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.53-59
• /
• 2013

The purpose of this study was to analyze the topographic effect of the LAI (Leaf Area Index), which has been widely used as an index that quantifies the structure of forest vegetation in Deogyusan National Park. With this aim, the study was conducted through a regression analysis which took as explanation the following variables: the elevation, slope, aspect, and soil moisture conditions. The LAI was taken as the response variable. Overall, the correlation between the Field-LAI and topographic factors was less than 0.5, which was relatively low. Except for topographic altitude, there was no statistical significance regarding the correlation with other factors. Meanwhile, regarding the orientation of the correlation, the higher the attitude, the steeper slope, the lower the soil moist, the lower the LAI value. The topographic altitude was found as a statistically significant explanation variable. The TWI (Topographic Wetness Index), which was used in this study to explain the soil moisture conditions, was not significantly related to the LAI distribution. The results of this study are expected to be utilized as basic data in more accurate forecasting the LAI distribution using remote sensing data.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.47-52
• /
• 2011

Recently damage scale by local winds and typhoon has dramatically increased. Korea has the terrain over 70% of the land and the planning of the wind load is necessary to estimate reflecting appropriately the change of the wind-speed according to the characteristic of the terrain and in the Korean Building Code(2009), this is stated and it reflects to the design process. However, in order to estimate the topographic factor of the wind speed considering the topographic characteristics in the structure design actually, it has many difficult points including the local topographic survey, etc. In this paper, the Digital Elevation Model(DEM) is created using TIN interpolation method in the form of the digital map and then the interface was designed and implemented which can automatically estimate the topographic factor of wind speed by using ESRI(R)ArcObjectTM and the Visual Basic programing language. By applying it to the terrain which positioned in the downtown area, the practicality of the topographic factor of wind speed estimation interface was checked.

• Journal of the Korean earth science society
• /
• v.30 no.5
• /
• pp.550-564
• /
• 2009

When magnetotelluric (MT) data are obtained in the vicinity of the coast, the surrounding seas make it difficult to interpret subsurface structure, especially the deep part of the subsurface. We introduce an iterative method to correct the sea effect, based on the previous topographic correction method that removes the distortion due to topographic changes in seafloor MT data. The method first corrects the sea effect in observed MT impedance, and then inverts corrected response in a model space without the sea. Due to mutual coupling between the sea and the subsurface structure, the correction and inversion steps are iterated until the changes in each result become negligible. The method is tested for 1- and 2-D structures using synthetic MT data produced by 3-D forward modeling including surrounding seas. In all cases, the method closely recovers the true structure assumed to generate synthetic responses after a few iterations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1987.07a
• /
• pp.263-272
• /
• 1987

• Journal of the Korean Institute of Landscape Architecture
• /
• v.24 no.3
• /
• pp.29-41
• /
• 1996

The purposes of this study were to develope some techniques which can be used in the landscape simulation process using PC based computer grahics. As a result, a couple of utilities were programmed in AutoLISP language. The one(DSLINE.LSP) is to digitize 2-dimensional structuer forms in the interactive mode considering error handling, and the other one (IMPOST.LSP) is for superimposing and visualizing the digitized plan data to 3-dimension solids & surfaces referring to topographic elevations of meshes in digital terrain model. By applying utilities to present site, the followings may be described. 1) The utility DSLINE.LSP for digitizing simplified building structure form were proved to be easy to input data of polygons including orthogonal edges by handling user coordinates system and checking invalid intersection and default colsing. 2) IMPOST.LSP utility for superimposing and visualizing tool were proved to be more complicated and speedy in calculating process compared with a practical application of modeling tool before rendering process in landscape simulation of built environment on topographic relief, on specially mesospace level of assessment.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.174-179
• /
• 1998

In this paper, the radar altimeter for topographic mapping over land is introduced and the characteristics of the return signals are analyzed. The radar system is described briefly and the requirements to get the fine resolution of the terrain surface height are considered. The designed radar altimeter was tested on the landscape in the near of Stuttgart. The measured data shows very fine profile of the test landscape and the height errors induced from different geometrical structure of the land surface are acquired in the measurement. In the test area, most characteristics of radar return signals over land could be tested and the results of the topographic mapping using our radar altimeter can be used for future radar altimeter development for land applications.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.6-17
• /
• 2002

Refraction tomography was developed to interpret subsurface velocity structure easily in topographic conditions. It was applied to synthetic refraction data to find the factors for optimization of applicability of refraction tomography such as configuration of profiling and its length, spacing of geophones and sources and topographic conditions. Also, low velocity layer near VSP hole could be detected by joint inversion with refraction and VSP data. Continuity of subsurface velocity structure in two different spread lines for area of house land development was good in case of applying our algorithm and velocity structure was classified quantitatively to evaluate rippability for engineering works.