Abstract
With more than 70% of the country consisting of mountains, Korea has large and small mountains, and hills located in the inner cities. Therefore, Korea's architectural structure laws stipulate that an increase in wind speed due to the influence of terrain should be considered in the design of wind loads of buildings. But if more than two mountains are located around the building or if the boundaries of the land surface are not clear when calculating topographic factors of wind speed, the designer has subjectively selected the coverage of the topographic factors of wind speed or the surface. This may lead to unscientific design of wind loads. This study attempts to analyze topographic factors of wind speed by using a 1:5000 topographic map with relatively high location accuracy and thereby to reflect changes due to the topographic characteristics and influence at the point where the building is located. By also selecting terrain surfaces and vertexes through Arc GIS and presenting a scientific approach to determine the range of topographic factors of wind speed, this study is expected to make a contribution for more rational and cost-effective wind-resistant design of buildings.
국토의 70%이상이 산지로 구성되어 있는 한국은 도시내부에 크고 작은 산, 언덕이 위치하고 있다. 따라서 건축구조기준에서는 건물의 풍하중 설계 시 지형의 영향에 따른 풍속의 증가를 고려하도록 하고 있지만 지형에 의한 풍속할증계수 산정 시 건물 주변에 두 개 이상의 산지가 위치하거나 지표면의 정의와 높이가 명확하지 않을 경우 설계자의 주관에 의해 지형에 의한 풍속할증계수를 산정함으로써 비합리적인 내풍설계가 이루어지고 있다. 따라서 본 논문에서는 이러한 문제점을 해결하고 보다 합리적인 지형에 의한 풍속할증계수를 산정하기 위하여 ArcGIS를 이용하여 지형에 의한 풍속할증계수를 산정하는 방법을 제시하고자 한다. 이를 위해 본 논문에서는 비교적 높은 위치정확도를 가진 1:5,000 수치지형도를 이용하여 지형에 의한 풍속할증계수 산정 시 적용범위를 명확하게 정의함으로서 지표면과 정점을 명료하게 산정하여 보다 합리적으로 지형에 의한 풍속할 증계수를 산정하였다.