• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.4
• /
• pp.322-329
• /
• 2003

We have studied how surface pretilt angle affects generation of disclination line in liquid-crystal-on silicon cells for 45$^{\circ}$-twisted nematic (TN) and vertical alignment (VA) modes with pixel size of 15$\mu\textrm{m}$. Our studies show that when the pretilt angle is increased from 0$^{\circ}$to 3$^{\circ}$ in the 45$^{\circ}$-TN cell, the disclination line at left side of on-pixel becomes weak and is well suppressed with $\theta$$\_$p/=3$^{\circ}$ although the pixel size Is decreased. In the VA cell, when the pretilt angle is decreased from 89$^{\circ}$ to 86$^{\circ}$, the disclination line at right side of the on-pixel is suppressed well and even for a smaller pixel size, it does not exist when $\theta$$\_$p/=86$^{\circ}$. The results inform that the pretilt angle strongly affects the image quality of microdisplays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.400-400
• /
• 2007

In this study, we investigated liquid crystal (LC) alignment with ion beam (IB) that non contact alignment technique on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide under various ion beam angles. In this experiment, polyimide layer was coated on glass by spin-coating and Voltage-transmittance(VT) and response time characteristics of the TN cell were measured by a LCD evaluation system. The good characteristics of the nematic liquid crystal (NLC) alignment with the ion beam exposured polyimide surface was observed. In addition, it can be achieved the good EO properties, and residual DC property of the ion beam aligned TN cell on polyimide surface.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.138-139
• /
• 2001

일반적으로, 표시 소자에서 원하는 색을 얻기 위해서는 가색 혼법, 감색 혼법 두 종류의 색 혼합 방법을 사용한다. 가색 혼법은 액정 cell에 적색, 녹색, 청색의 칼라 필터를 사용하여 3가지 색을 더함으로 색을 표현하는 방법이다. 가색 혼법은 매우 높은 명암 대비비를 얻을 수 있으며, 노트 PC와 휴대용 소자를 포함한 대부분의 LCD 분야에 적용된다. 그러나, 밝은 상태의 광 세기가 이론적으로 입사광의 1/3로 줄어들기 때문에 투과율이 낮다는 단점이 있다. (중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.506-508
• /
• 2007

We studied the nematic liquid crystal (NLC) alignment capability with a new alignment method utilizing an inkjet printed polyimide (PI) layer. A good, uniform LC alignment was achieved by the good PI printing using a new alignment method. The pretilt angle generated on the printed PI layer using the alignment method was almost the same as that on printed PI layer using rubbing alignment method. In addition, the good electro-optical performances of the new aligned twisted nematic (TN) cell with printed PI surface was obtained

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.57-60
• /
• 2003

Electro-Optical (EO) performances for the ion beam (IB) aligned twisted-nematic (TN)-liquid crystal display (LCD) with ion beam exposure on the new of diamond like carbon (DLC) thin film surface were investigated. Voltage-transmittance (V-T) curve and response time without backflow bounce in the ion beam aligned TN-LCD with ion beam exposure for 0.5 and 1min on the DLC thin film was observed. Also. the fast response time of ion beam aligned TN-LCD with ion beam exposure for 1min on the DLC thin film surface can be achieved. The residual DC voltage of the ion beam aligned TN-LCD on the DLC thin film surface was almost the same as that of the rubbing aligned TN-LCD on the polyimide(PI) surface.

• Korean Journal of Biological Psychiatry
• /
• v.6 no.1
• /
• pp.67-73
• /
• 1999

The cAMP-dependent protein kinase(PKA) is an intracellular enzyme with serine-threonine kinase activity that plays a key role in cell growth, differentiation, and apoptosis in eukaryotes. In order to understand the PKA signal transduction pathway regulating cell life cycle and identify its role, we focused on the characterization of up-/down-regulated genes by PKA using the differential display polymerase chain reaction. Seven differentially expressed sequence tags(DEST) have been obtained. Among these DESTs, 2 DESTs were homologous to the sequence of genes from BLAST search result. KC1-5 DEST that was up-regulated in A123.7 cells was highly corresponded to mouse apoptosis-related gene(MA-3) or mouse mRNA for topoisomerase inhibitor suppressed(TIS). MA-3 was induced in various types of apoptosis, specially in NGF-deprived apoptotic PC12 cells. TIS was down-regulated in the RVC lymphoma cells incubated with topoisomerase inhibitor that induces DNA strand breakages. PG1-1 DEST that was highly expressed in PC12 cells was corresponded to transposon Tn10 3'-end. Tnansposon Tn10 was up-regulated in differentiated myeloblastic ML-1 cells by 12-O-tetradecanoylphorbol-13-acetate. This study illuminates that MA-3/TIS was down-regulated by PKA activity, and transposon Tn10 was up-regulated by it.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.289-290
• /
• 2005

We have investigated the electro-optical (EO) performances of the flexible liquid crystal display (LCD) on twisted nematic (TN) mode according to variation of cell gap in comparison with glass LCD. There were four kinds of cells which were having cell gaps of 3$\mu$m, 4$\mu$m and 5$\mu$m, especially the lowest 2$\mu$m on flexible and glass substrates separately. The EO performances of the flexible cells on the rubbed potyimide (PI) were almost the same those of glass cells. The response time of flexible cells was shorter than that of glass cells but the alignment of liquid crystal (LC) of flexible cells was weaker than that of glass cells. The residual DC of flexible cells was on the increase like that of glass cells in compliance with lowering cell gap.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.276-280
• /
• 2001

The quality of images displayed by using an LC projector is strongly influenced by the cell-gap variations over LC panels, the essential components of the projector. We show that such influence can be relieved by introducing slit patterns in the pixel electrodes in the LC panels. The improvement comes from the compensation of the influence of cell-gap variations by optical anisotropy variations arising from the lateral components of the electric field generated by the slit patterned electrodes. Simulations show that cell-gap tolerance can be increased by more than 50% by introducing the slit patterns. This method can be used in TN mode LC panels, which use LC's with positive dielectric anisotropy. tropy.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1388-1390
• /
• 1998

In this paper, we investigated the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by transcription alignment method on polyimide(PI) surface with side chain. The LC alignment produced by the transcription alignment method is attributed to a memory effect of the NLC on PI surfaces. We observed that the pretilt angle of NLC is generated about $3.7^{\circ}$ with transcription alignment on PI surface. Also, we obtained the good electro-optical(EO) performance of twisted nematic(TN)-liquid crystal display(LCD) by transcription alignment method on PI surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04a
• /
• pp.18-22
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about $1.7^{\circ}$ lower on the glass substrate than on thin plastic substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on glass.