• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.4
• /
• pp.42-48
• /
• 2015

This paper has its purpose on constructing a prediction model of the arrival sequencing strategy which reflects the actual sequencing patterns of air traffic controllers. As the first step, we analyzed a pair-wise sequencing of two aircraft entering TMA from different entering points. Based on the historical trajectory data, several traffic factors such as time, speed and traffic density were examined for the model. With statistically significant factors, we constructed a prediction model of arrival sequencing through a binary logistic regression analysis. With the estimated coefficients, the performance of the model was conducted through a cross validation.

• Journal of fish pathology
• /
• v.16 no.2
• /
• pp.131-134
• /
• 2003

The change of membrane fluidity in rockfish (Sebastes schlegeli) phagocytes during respiratory burst was investigated. Fluorescence polarization (FP) was used as a measure of membrane fluidity, and 1-(4-trimethylaminophenyl)-6-phenyl-1 .3 ,5-hexatriene (TMA.-DPH) was used us a fluorescent probe. The significantly higher FP values in phagocytes stimulated With zymosan or phurbol myristate acetate (PMA) than unstimulated control phagocytes suggests that membrane fluidity of phagocytcs is decreased during the respiratory burst. The faster decrease of FP value in PMA stimulated phagocytes than in zymosan sumulated phagocytes may be due to bypass of the receptor-mediated stages of functional modulation. which is needed in zymosan stimulated phagocytes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.256-256
• /
• 2011

We have deposited Al2O3 thin films on Si substrates at room temperature by UV-enhanced atomic layer deposition using trimethylaluminum (TMA) and H2O as precursors with UV light. The atomic layer deposition relies on alternate pulsing of the precursor gases onto the substrate surface and subsequent chemisorption of the precursors. In many cases, the surface reactions of the atomic layer deposition are not completed at low temperature. In this experiment, the surface reactions were found to be self-limiting and complementary enough to yield uniform Al2O3 thin films by using UV irradiation at room temperature. The UV light was very effective to obtain the high quality Al2O3 thin films with defectless.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.355-355
• /
• 2011

최근 석유 자원의 고갈로 인하여 요구되는 대체 에너지 개발의 필요성이 대두되고 있다. 그 중 태양에너지는 지구의 생명체가 살아가는 에너지의 근원으로서 매초 800~1000 W에 달하는 에너지양으로 볼 때 태양은 인류가 가장 풍부하게 활용할 수 있는 에너지원이다. 태양에너지를 이용한 염료감응형 태양전지(Dye-Sensitized Solar Cells, DSSCs)는 제조원가를 낮출 수 있고, 유리 전극을 이용한 투명한 태양전지를 제조할 수 있어 건물의 유리창등으로 응용할 수 있는 장점이있다. 이러한 태양전지의 에너지 변환 효율을 증가시키기 위한 방법으로 흡착된 염료에서 발생되는 광전자가 전해질의 산화, 환원되는 요오드 이온(I-/I3-)과의 재결합(recombination)현상으로 인해 광전변환효율이 떨어지는 현상이 발생한다. 이에 본 연구는 TiO2 전극 위에 높은 밴드 갭(band-gap)을 가지는 Al2O3 박막을 TriMethylAluminium(TMA) 전구체를 이용한 Atomic Layer Deposition(ALD) 공정을 사용하여 증착, 재결합 방지 효과에 대한 연구를 진행하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.4
• /
• pp.272-278
• /
• 1993

The trimethylamine-sensing characteristics of ZnO based thin film semiconductors and the sensitivity enhancement by squttering conditions have been investigated to develop a new type sensor for detecting fish freshness. The sensor fabricated with a 300nm of ZnO thin film with 4 wt% Al sub(2) O sub(3) and 1 wt% TiO sub(2) exhibited the highest sensitivity of 155 at 30$0^{\circ}C$ of working temperature and to the 240 ppm TMA gas. Deposition of ZnO thin film using a RF magnetron sputter was carried out at a pressure of 10 super(-2) Torr in pure oxygen gas with an RF power of 100W. The sensor exhibited a large response to the actual gases produced by a mackerel at an early stage of decomposition.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.292-295
• /
• 2015

The effect of Ligand Binding energy in quantum rod (CdS/ZnS) plays a critical role in anisotropic growth. As mimicking large chain of ligands and using the head of the chain, I plan to bind the quantum rod and ligands so that it can grow well consequently. So the ultimate goal of this study is on how ligand binding can affect the growth of this quantum rod. There are preferred surfaces between the quantum rod and ligands, and we empirically know that ligands which bind the quantum rod; Phosphoric oxide (PO), Phosphoric acid(PA), Carboxylic acid(CA), Trimethylamine(TMA), have strong tendency to be attached on the surfaces of CdS/ZnS; ($11{\bar{2}}0$), ($10{\bar{1}}0$), ($000{\bar{1}}$), (0001). I virtually bond the surface and the ligands, and calculated the ligand binding energy after optimizing their structure, utilizing EDISON simulator. After all, I figured out how they are linked each other and how the quantum rod grows.

• Culinary science and hospitality research
• /
• v.5 no.1
• /
• pp.131-148
• /
• 1999

Cheju's local foods are various but Island being geographically surrounded by water, sea-foods play a greater part in the diet that is quite different from the mainland Most of dishes are prepared from local foods and the marine products. That traditional food that have been developed through the lifestyle are now becoming the great interest to both foreign and domestic guests. In this research, we have concluded that developing a cheju's traditional food manu and local manu cooking method. 1. Improvement of cooking method. - development of cheju's traditional Food material and spice. 2. Use not raw fish - boiling, grilling, frying 3. Improvement of cheju's local Food's name. 4. Use the only Boneless fish. 5. taste reformation of Fermentation Food - Masking the TMA etc. 6. Use the many Spice in local food.

• Ceramist
• /
• v.22 no.4
• /
• pp.393-401
• /
• 2019

Thermal analysis means the analysis of a change in a property of a sample, which is related to an imposed temperature alteration. Measurements are usually made with increasing temperature, but isothermal measurements or measurements made with decreasing temperatures are also possible. In fact, any measuring technique can be made into a thermal analysis technique by adding thermal control. Simultaneous use of multiple techniques increases the power of thermal analysis, and modern instrumentation has permitted extensive growth of application. The basic theories of thermal analysis are well developed and some of them are explained in this paper.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.2
• /
• pp.1-5
• /
• 2014

Transparent and conducting aluminum-doped ZnO electrodes were fabricated by atomic layer deposition methods. The electrode showed the lowest resistivity of $5.73{\times}10^{-4}{\Omega}cm$ at a 2.5% cyclic layer deposition ratio of Trimethyl-aluminum and Diethyl-zinc chemicals. The electrodes showed minimum resistivity when deposited at a temperature of $225^{\circ}C$. The electrode also showed optical transmittance of about 92% at 300 nm. An organic solar cell made with a 300-nm-thick aluminum-doped ZnO electrode exhibited 2.0% power conversion efficiency.

• Journal of Magnetics
• /
• v.4 no.2
• /
• pp.55-59
• /
• 1999

In an attempt to find an effective production way of the$ Sm_2Fe_{17}N_{x-}type material, the Sm_2Fe_{17-}$type alloy with chemical composition of Sm 22.7 wt.%, Fe72.3 wt.% Nb 5.0wt.% was subjected to a HD (hydrogen decrepitation) treatment prior to a nitrogenation, and its effect on the formation of the nitride material was investigated. The nitrogenation behaviours of the alloy were investigated using a TPA(thermopiezic analysis), TMA, and DTA under nitrogen gas, and XRD. It has been found that the previous HD treatment significantly facilitated the formation of $Sm_2Fe_{17}N_{x-}$type nitride, and this was accounted for by the clean surface and the finer particle size of the powder caused by the HD treatment. It has also been found that the hydrogen atoms existing in the initial HD-treated alloy were removed almost completely during the nitrogenation. The heat output associated with the nitrogenation of the previously HD-treated alloy was found to be significantly smaller than that of the as-cast alloy.